LUCASOil X-Tra Heavy Duty Grease/12x1/ 1lb Tub

Wear disposable gloves. Use it on my utility trailer wheel bearings.

Lucas makes the best grease bar none.Good and tacky, stays put, and doesn't wash off.

Lucas products are good, no need to question.

I purchased this to hand pack some trailer wheel bearings.

I use this when I am cleaning and lubing my firearms. This high temperature rated grease does the trick. To apply I purchased and use a Hobbico 12cc Curved Tip Hobby Syringe that can be found here on Amazon for less than $4. Loading the syringe is easy. You just pull the plunger all the way out and load from the back end. I use my folding knife that has one blade that is not pointed and dip the grease a little at a time out of the tub and gently feed it into the syringe. After I get the syringe about 2/3 full I wipe the excess off the back of the syringe and turning the syringe upward I place the plunger back in and push upward displacing the air in the syringe and getting the grease to the tip. Because of the thickness of the grease I trim a very (very) small part of the tip back. Dispensing then is no problem at all in small amounts exactly where you want it. This stuff is as good if not better than any gun grease you can find and with a jar holding a full pound I won't be needing to buy any more long in to the future. The cap fits back on nicely so I do not expect it to start drying out for quite a while either. Works great and the cost is very low.

Used this grease on my F250 wheel bearings. Less messy than the red axle grease, but I found no visible difference in the durability. Had to pull the half axle out for an unrelated issue the day after packing new bearings with this grease and it was already slung out after only several miles of driving. That’s probably normal, but other reviews claim it held on longer than the red stuff. Didn’t seem to be the case for me, however it did the job.

I purchased this Lucas Oil - X-TRA Heavy Duty Hi-Temp Grease for lubricating the needle bearing inside the Centrifugal Clutch on my Coleman Powersports - CT100U Mini Bike. This Hi-Temp Grease is by far the best I have ever used for my Centrifugal Clutch needle bearing & the grease lasts nearly three times as long as the other Hi-Temp Grease I have used previously. This is going to be an excellent grease to also to use on my 2003 Honda - XR-50R & 2005 Honda - CRF-70F Pit Bikes like the shock mounts, swing-arm bearings, wheel bearings, steering column bearings, & ect...where extreme pressure is applied & needs excellent lubrication. If you own an Off-Road machine of any kind you should be using this grease on it to make sure the parts can last as long as they possibly can before wearing out. I am certainly going to be purchasing more of this grease & using it as my #1 main grease for all of my Off-Road machines from now on. I can not recommend this product anuff, it is really excellent grease & has the performance to back up every claim it makes. This grease is worth every single penny!!!

This is great grease! Lucas products are excellent! Front wheel bearings in my truck feel like new again!