TRUGLOTFX PRO Handgun Sight, Glowing Shock Proof Tritium and Fiber Optic Night Sight for Handguns, Compact, Durable, and Snag Free Sight

Hey product, delivery and customer service is off the charts A++++++++, however if you have a S&W M&P don’t think you can install them yourself with the gear you use on a Glock. S&W quality is steps above Glock(I own multiple versions of both brands). Expect to pay for the install with someone who has a high dollar sight installation tool, which is what I will have to do. With that being said both product and seller are highly recommended.

Actually, I purchased this one for a Walther CCP that came with adjustable sights. The original rear sight broke and I subsequently found out that this firearm, along with several others from Walther, are machined for Glock sights. Unit installed as it should (with a sight press of course) and makes a huge difference in low and no light conditions. This is my 4th firearm I have installed a TFX Pro on. Ruggedly made. In three years, I have had no issues yet.

Despite what the packaging says, this DOES fit the smaller CZ 75D (PCR). It's tight getting in the rear sight using a punch and a hammer--but it might be easier with a dedicated sight press machine if you have one. I tapped the rear sight with a soft punch and slowly (patiently) got it in. Then I used a caliper to center the rear sight on the slide. There's a good video on YouTube of someone better than me demonstrating this. HOWEVER, as someone below has already mentioned: these sights DO change the sight picture of the 75D. It is no longer the traditional lollipop/6 o'clock sight picture, requiring the front sight to be just below the predicted impact point. Now--with these sights--it has a combat sight picture, requiring the front sight/pipper to be ON the target. Pros and cons of both sight pictures, but don't add this if you don't want a combat sight picture. Otherwise, the target acquisition with this is much easier than with the standard sights, it glows nicely at night even after being in the dark for several hours, and I'm very happy that I added it.

Wow. Incredible visibility on these sights. Had them put on by a gunsmith for $45 and went straight to the range. Even in moderate lighting conditions they are clear and bright. Would definitely recommend.

Fantastic in direct sunlight? Absolutely pointless in low light.

Note these are my first aftermarket sights, but I did a lot of research and analysis before buying and felt the TFX Pro was the best option. Your needs may lead to a different choice.Regarding installation, I completed the install on my S&W Shield myself. It took about an hour because getting the old sights off can be a bit of an experience and effort, but the new sights went on more easily, and I also did some fine tuning to get the sights centered. Much of the time was being careful because I was concerned all the pressure to push the sights off and on was going to deform or break the sights, but nope not at all.I did rate the install as 5 stars, but that doesn't mean it's easy. It's just easier than the stock sights and I didn't have any hang-ups during the install. Again, you just need to make sure you still the sights centered correctly.ADVICE 1: Get a good sight pusher. Using the hammer and punch was killing my punches and the sights wouldn't even budge. I could have gone harder but I didn't want to risk marring the slide, so the pusher proved to be much better. Note that I found it useful to clamp the pusher in a vise so it was more stable and less prone to slipping out of my hands.ADVICE 2: Before installing the new sights, use a sharp pencil to mark the center of the top of the slide while the old sights are in place. It will make it easier to center the new sights. I tried to use calipers to measure the center, but it was hard to get a good or consistent purchase when measuring, so I didn't get the accuracy I was looking for. I wish I had marked it. Or having a reputable gunsmith install the sights may be the easier way to go, just make sure they care enough to center the sights correctly.ADVICE 3: Apply a light coat of oil into the dove cuts with a swab so the new sights go on more easily.ADVICE 4: Many pistols have a set screw on the rear sight to ensure it doesn't move. You will need blue thread locker on the set screw so it doesn't come loose.So after the install, I just practiced some draw and and target acquisition. I literally could see an improvement after like 6 draws. It's really easy to get used to, and it's really easy see whether the dots aligned correctly, especially with the orange circle front sight. I wish I bought these a long time ago.I was concerned about the tritium/fiber being too bright when in the dark, but not the case at all. They are low key enough that if you needed to hide yourself, they wouldn't show, but have good brightness to still be plenty visible. I'll still have to try it in mixed lighting to see if the green dots are still easy to make out, not sure.I really liked the rear sight having a ledge that I could use for one-handed racking. It's also useful for my friend, where she doesn't have a lot of grip strength to rack the slide, so having the ledge makes her life easier as well.That's about it. Well worth the price and they look great. Now I'm going to buy more for my other pistols. Enjoy.

Was very excited to have these purchased for me a gift. As I had wanted to upgrade my factory sights. Package arrived undamaged and in good shape. After removing the sights from the Package and reading the manufacturer info contained there in. Before having them installed on my firearm I went into a dimly lighted room to test the brightness of the night sight portion of these sights. Totally dissatisfied! They did not glow. I held the sight at arms length to simulate being installed on my firearm. And could not see the dots. I held them up to my eyes and could barely see a very dim glow. I had another member of my family try and they had the same result. I then went into a dark room. And again could not see the sights. In the daylight or very well lighted room the fiber optic took over and we're ok. But not as bright as I had expected or hoped. I tried to contact Amazon to return them to find out, this item cannot be returned. Have contacted TruGlo twice via their Contact us form. With no reply. Also now have contacted them directly via phone and submitted pictures, proof of purchase etc etc after asking them about the sights and could they please identify an age for me. As the sights per the documents included in the package state the glow portion sights are good for 12 years. I have suspicion these may be 1/2 life or older. Still waiting on response from TruGlo. If none soon received will contact Amazon and request action on their part. Do not recommend!

had these replace older truglo tfo and they are not an upgrade but still as good. red/orange is not as high vis. as the picture shows, but still love em as tru glo has been very reliable and glowing for me over the years