EverBright White Led Strip Lights, 5M(16.4Ft) 600LEDs Waterproof IP68 Flexible Light Strip for Home Kitchen Cabinet Car Mall Party Decoration Stage Music Led Tape Light,12V

I used the light over my kitchen cabinets. The light is yellow. It adhere well to the cabinets. I don't have to use extra tape. It is bright.I received lots of complimentsIt is beautiful.I received lots of compliments.Love it.

The adhesive is probably the worst Ive ever dealt with but once contact adhesive is used in addition to its own then it is fine. I see they all have an M printed on them as if they are trying to claim its 3M but make no mistake, scotch tape has better adhesive qualities and this is NOT 3M.Another issue is you cant daisy chain more than a couple of strings together like 1 long strip because the copper is so thin it has high resistance and causes a VERY noticible drop in brightness as each string gets farther from the power supply. At 12 volts this will happen on any brand but I have another brand of green LED strips we installed below this brand and the issue is barely visible so it is a problem with this brand in particular.We also noticed several strings that were missing any wire pigtail on the ends. Not a crisis because I just soldered some on but for those that dont solder this could be an issue.On a different note, This is one of the few manufacturers that included a power supply with each string of lights. It is only capable of powering 1 string tho so if connecting several in series you will need a better power supply.These do appear water and weather resistant and have some sort of plastic or thick silicone covering on the LED side.We purchased 15 of these so our issues were not isolated to a couple bad batches.

Lot of extra un-needed stuff came with the lights, hard to find just LED lights. Way too dim, can barley tell if they are yellow. If you want good lights buy XKTTSUEERCRR lights. Bought a bunch of these back in 2017, for my Deck steps, still working great after surviving 5 North Dakota Winters. $9 for 5M (16.4Ft.)

I ordered two of these LED rolls and as soon as I attempted to adhere them, they stopped working. I used the brackets that came with it and tried to be gentle. One seemed weak where the LED strip met the power cable and came apart there as soon as I moved it. The second worked while on the roll, but once I bent them at all they stopped working about 25 inches into the strip. I hope I received a bad batch or something as that is not good.

I have a need to make LED pads that are flexible and can go over body parts. I've ruined several prototypes until I found these Everbright strips. They are super thin and flexible. These were the only ones I could find mounted on black strips. Everything else is white. This looks far classier. I love the flexibility. For my purposes, I am making LED pads to treat a variety of skin conditions for my patients. So flexibility and brightness are key.My biggest hitch was trying to attach the LED connector cables to continue the circuit. These strips are too wide to slide through the slot and the strip is too thin to slide under the metal pins. My workaround was to affix the connectors face down and clamp them rather than ruin the strips trying to push them under the clips. A bit extra effort, but hey, I have it working.Because this was a success, I have already ordered more spools of lights from this supplier.

The actual leds are pretty dim and not very noticeable with any ambient light. It might be okay in a very dark room or at night for some ambiance. The circuit board material is also very flimsy seems to be the maylar style flex with little or no copper, which can be difficult to solder if you plan on cutting or making changes. The plus side is it does come with a power supply and dc jack already attached to the tape, ready to go for those with no equipment or experience

The sticky tape on the lights is junk. Doesn't stick and to remove it is next to impossible.

Great color, bright and they are an attention grabber. Downside, the adhesive on back of product NOT good had to use some aftermarket double sided tape to stick light to my product.

This is the 2nd set of these lights that I have bought, thinking it was my mistake when the first lights came (supposedly amber) as absolutely canary yellow. They did work well, installed easily on the cap of our RV, and adhered nicely, so went back into the listing to buy the other set that *also* say amber in their description and ordered them. Installed those. Absolutely the same exact shade of canary yellow. Perhaps the 2 listings for exactly the same color should be combined, since there is zero difference.

Worked out perfectly for my intended application, the adhesive backside is pretty good as long as you properly clean surface you are applying the strip to with supplied prep packets or acetone. Satisfied customer :)

Decent quality lights, exceptionally bright, adhesive is junk on the back, the tape they sent with it was sub par at best. Some quick set epoxy helped that along nicely.Very happy with the outcome

First time ever. After over 10 years of wiring LED strips in North America and EU, I have never across a strip that has been manufactured with the positive and negative the wrong way round. This mess up is going to cost my company thousands of $Dollars in labour to remove and rebuild. These must-have missed the Quality control stage.DO NOT BUY!

Used twice and died, waste of money , would not buy again , They are bright! But second time plugging it in they got hot instantly and started frying and stoped working, could smell burning too, do not buy