BGS1757-22 | Crowfoot Spanner | 12.5 mm (1/2") Drive | 22 mm

Worked well and I didn’t brake it . Couldn’t do the job without it. Well made.

Great piece of kit, bought to remove a faulty oxygen sensor. The shape of this one, with the "claws" on, means that it won't slide off the job. A bonus when you're working one handed. Used it with a 600mm breaker bar and the oxygen sensor came loose very easily.It's going to be a useful addition to my toolkit.

Bought this after reading reviews on it, first glances look well made, need it for removing sensors and didnt have one. Will try out and report back if it is as good as other people say it is.

Very well made did job of removing an overtight 02 sensor easy

I was trying to remove a oxygen sensor on my 2014 golf r. I tried with one these black long sockets but it was parting and rounding off the sensor head. I ordered this and the sensor loosened straight away. Great tool did the job.

I made 4 separate attempts in a week to replace the faulty NOx sensor on my BMW 530i, and finally succeeded with this tool.The first 3 failed because the 'special' black 22mm O2 sockets I bought with the gap in them to allow the cable pass through, were all a loose fit on the sensor, started to spread / open as I applied some pressure to the breaker-bar, and started to slip and round off the corners of the sensor nut. I tried every trick in the book - penetrating oil, heating the exhaust + sensor with a blow torch, breaker bar, extension bar, hammer, and jubilee clip around the socket to prevent it spreading, but none of them worked These were the black type in the last photo, so don't waste your time or money with them.As one last try before giving up and leaving the car into a garage, I got this 22mm 'crows foot' from Amazon. It was a much tighter fit than the other 3 sockets on the sensor, and easily removed it wil no drama or damage.Once I had the old sensor out, it was easy to pop in the new one, tighten it up with this socket and clear the error code so my car's behaving itself properly again.If I had spotted this socket earlier, I could have saved myself 3 evenings and a load of hassle. Highly recommended.

Very good and very quickly. Thank you

Used to remove PM sensors without cutting the cable. Worked fine until I had one that was almost welded on. Tried to remove with a 4ft breaker bar and no surprise, it slipped, sadly taking a chunk off the tool in the process. Later got it out with some oxy help but sadly still took another chunk off. Had held up well to this point.

Bonne qualité et bon prix

Applicabile ad una dinamometrica mi ha permesso di chiudere a coppia le viti di un ponte sollevatore che altrimenti non sarei riuscito a serrare...cromo vanadio ,le viti m16 chiuse a 15kgm ,e la chiave....mmmmuta! Perfetta!

Utile pour serrage de couple tête d'amortisseur avec une clé dynamometrique ,juste prévoir un adaptateur

Der Hahnenschlüssel erfüllt zuverlässig seinen Zweck und überzeugt durch seine Robustheit. Die solide Konstruktion macht ihn zu einem zuverlässigen Werkzeug für verschiedene Anwendungen. Insgesamt ein zufriedenstellendes Produkt, das seinen Zweck erfüllt und durch seine Langlebigkeit überzeugt.

Muy útil en racores con mal acceso