- Soft-Set Pipe Thread Sealant – Non-Hardening Paste for Metal & Plastic, 2 oz Tube – Reliable Leak Prevention, Drip-Resistant, Temp Range -100 to 600°F, Made in USA

Working in carwash service I repair water chemical and hydraulics constantly. This is the go to sealant for everything and works when teflon tape won’t. Use on plastic and metal. I keep one in the truck 24/7 and won’t use anything else.

Great product. Easy application and seals well.

Very good thread sealer. Used it on water lines and had no leaks!

worked great, used this on a diesel tank orifice that was leaking, two weeks later still not leaking which is longer than the last product I used. easy to apply and adhesion to the surfaces was good. Great value for the price.

I've been using Gasiola for years. I especially like it for plastic fittings and plastic-to-brass connections. One area where I've had a poor experience was on a propane system where above ground plumbing was 316 stainless and brass (valves). 316 stainless is unforgiving, needing a thin, durable sealant. Complicating the situation was our equally unforgiving environment here in Arizona- Temps reaching 118 degrees baking the steel and everything attached to it. Just for perspective, we have to provide pressure relief valves on exposed copper and brass manifolds used for water as the water often boils driving pressures high enough to shatter plastic pipe attached to that system. On our propane system, we made about ten connections using Gasiola and the remaining 30 or so connections with a high performance teflon tape rated for propane. The system passed a pressure test with flying colors. About 3 months later I discover we have lost a substantial amount of propane. After exhaustive leak detection, we found ALL of the joints sealed with Gasiola had failed. Microleaks were present, and the compound had baked into just dust. None of the teflon tape connections had failed. All of the leaky connections were re-sealed with tape and the system now tests perfectly. I still love Gasoila - just need to be careful about the environmental exposure the connection will have.

Works perfectly! Used it on the threads is a tuff jug fuel jug that the cap kept leaking on. No more leaks, and it's been months since I put it on! For clarification, I used it on the threads where the hose connects to the cap, not where the cap connects to the jug, as that joint needs to come apart to refill the jug.

Got for husband. He likes using it. Said great stuff.

Nice product worked well

Parfait pour le propane vapeur ou liquide

Hi ; This is an excellent product, expensive but good with exceptions . I used it in a well water system, approximately (40-60 psi range) my fittings were primarily stainless to stainless, but I had a couple of brass fittings also . The Exceptions : Gazoila is a wonderful, soft set product, easy to work with, but you MUST tape first , then apply the Gazoila over the Male taped threads . I used 2 full wraps of good high density tape . A brush ( supplied) makes easy application, and try and stay in the clockwise direction, the same as the tape . The other notable exception, even though soft set , it requires “dry time” . I went on the safe side and gave it a 24 hr set, with no water . This is for potable water , other elements, might be different, I.e. natural gas, propane, etc . One more thing “extremely low shelf life” for the money, no more then 1 yr !!! So check your dates . I hope this helps out . Regards ….

VERY GOOD

Supérieur au téflon, facile a utiliser, aucune perte de gaz.

Conforme et reçu rapidement