250in Cord Hider, One-Line Cable Hider, Yecaye Small Cord Covers for Wires on Wall System, Cable Raceway Kit for Max 2 Cords, Wire Hiders for Tv on Wall, Wire Hider, 16XL15.7in W0.59in H0.4in, White

We installed a large-screen TV in our kitchen and needed ~ 6 meters of HDMI cable to connect to the distribution point. I checked both commercial and 'home' raceways and chose this brand from Amazon. The HDMI cable is nearly 1 cm in diameter and I was concerned that it might be a tight fit, but I got lucky. The run covers two planes: vertically up the wall from the TV to the edge of the ceiling, left on that wall to a corner, and left on the adjacent wall to the connection point. The first two strips took about 10 minutes each to install while I got the 'feel' of the product, and the remaining 8 less than 5 minutes per strip. I had to cut 3 strips to length. I found that my carbide-bladed chop-saw worked perfectly for a clean and precise edge. The only problem I had was the inside corner: the cable was too stiff to use the 90-degree corner connector so I just mitered the strips to 45 degrees, just as one would with a wooden molding. Job done. The product is well-designed and sufficiently well-made. I had no problem with the adhesive tape, I found that a pair of sharp-pointed tweezers were perfect to grab the corner of the red plastic. I did not run out of tape, as some other reviews reported. My only complaint is the length of the strips. I would have preferred 4 strips twice as long (instead of 8 as they are) which required nearly twice the work. Of course that would have made the packaging twice as big, so I understand the reasoning. So only 4 stars for 'Easy to install'.

Worked great for hiding the cables in my man cave. I was able to run 2 speaker wires through these with no issues. Product looks really good and is super easy to use.

Used this to run 150ft of Ethernet cable along my walls to the only active port. Provided tape has good adhesion, try not to get much dust/dirt on it before placing or it won't stick as well. Their are multiple styles of corners available which was very helpful. The tracks are decently easy to cut with sharp scissors, but sometimes leads to cracking or slants. I found tilting the track made it easier to get a straight cut (if that makes sense). I've had it installed for a few weeks now and it hasn't budged even when I accidentally bump it. I ended up not even needing all of it as the parts are easy to adapt and extend in different ways. Overall great product, would deff buy again if I needed to run more cables.

Easy to install and cut if necessary. Final result better than expected.

I used this under my outdoor lanai to hide an extension cord running from my outlet to the roof line. The wall was painted stucco and at first I thought I would need to add some adhesive to get the raceway to stick to the wall but it is holding fine with just the adhesive backing. It was easy to install. I used a hacksaw to cut pieces to length and the caps allow you to hide rough cut edges. Also, the caps can be snapped over the top of the track. They don't have to be slid into place if you don't have the room. Looks fantastic.

With all the cord covers out there, I had to just pick one and go with it. I’m happy I picked this one. It came with a decent amount of cover, enough tape, different connections, and a nice box-so I can keep my leftovers in the original box in a closet for later. They slide on and off. You don’t have to waste your time lining up the ends (I showed the struggle in the video), just click them together, and then slide on into place. I love that the connections aren’t huge ugly elbows 😆 I had to cut one down-I took a close up pic of it (next to the useless command grip). It was REALLY easy to saw through. Might be able to score a few times with a razor blade 🤷🏼‍♀️ I have a hand saw, which seemed like overkill, but you gotta do what chu gotta do. It wasn’t too splintery on the ends with my rough cut. You can see in the close up where I scratched it, but if I put a connection point on there, it would be invisible. And in my situation, you aren’t close enough to tell at all. I even through a slide over some holiday lights by the bar, to help hide the cord by the plug. Not professional, but looks pretty frickin good for the zero effort. OH!! I saw reviews of some of these things saying the tape was too strong and peeled away wall, so I just cut strips a few inches long, and placed them here and there. Just in case. You could honestly nail the back piece to a wall and then slide the cover on too. Versatile.

Overall I do not recommend this product. It has a few fatal flaws. I bought it to run 50 feet of Ethernet cable across walls and over door frames. It's not capable of handling these long runs effectively. I would recommend looking elsewhere. The first issue is the adhesive. It's simply too strong and is capable of pulling the paint off the wall if you try to remove it. It's also tacky and rubbery so it does not stay in place nor is it easy to remove the backing before installation. This complicates the installation process. The second issue is the coupling design. While on paper it sounds brilliant, and in practice the parts do fit together nicely, where the problem comes in is the joints. The joins must be pressed in not snapped on. Thus it's physically impossible to run this stuff over any distance because you can't just lay down the cover and pop in the joints, they have to be physically pushed together so you have to run a full segment, then another, then another. The third issue is the couplings. They are thick and do not allow for the runner to be flush against trim like door frames and moulding. This leads to a cheap look after installation. With some improvements this product could be much better for longer runs. As is I would not recommend for more than a few feet.

المقاس ممتاز يناسب سلك الانترنت سهل التركيب افضل شي وصلات الزوايا ساعدت على اعطاء منظر جميل للجدار

A great kit with multiple angles to hide speaker wires around walls and ceilings. I was able to get two 16 gauge speaker wires in one cover running my surround speakers and Atmos speakers on the ceiling without drilling holes in the drywall. Should look great once I paint.

Very easy to use and works well. Keeps cables hidden and well organized. Stuck it to the ceiling and is still holding strong.

Purchased a different version of this product from this manufacturer and loved it, overall good quality product. However, this particular one was a little smaller than the original one i purchased and did not fit the cable i needed. Good for smaller cable projects. Returned for size only and purchased a different version from the same manufacturer. Package arrived in good shape and in decent time and return was easy.

This item is very easy to install and does a great job of hiding messy looking wiring. I was so impressed by the first that I bought that I bought a second one to hide even more wiring very simple to stick on and looks great when done.