Fellowes Powershred Shredder for 2127/3140/3250/4250 Series 50 Bags & Ties (3604101), 50 Gallon, clear

Handy for collecting shredding but not really a tight fit in bin. I suggest using several bits of Scotch Tape to hold the bag in place and reduce the overflow to the rear. Very handy and I would buy them again. Nice roll with twist ties for bag crosier.

Everything I have gotten has been great.

I really like these shredder bags. They are big enough to make it so I don't get shredded paper all over the place. They make the shredding process a lot more tolerable (especially if you don't like shredding). They are imminently affordable and do a great job. They also come in a roll, so it is easier to manage the bags.Highly recommended.

Shredder bags

Perfect original replacement bags for your Fellows shredder (in my case the 125ci). If you liked the original roll of bags that came with your shredder, and if this is the part number identified by Fellows in your manual to identify the same, then this is for you. Honestly, any bag seems to work. For a little bit I just used tall kitchen trash bags without a draw string, the same as my office trash can, which worked fine too. But I rather like having a dedicated roll of bags to just keep in the office that I know will always fit the shredder. I also like that they are semi clear so I can see later when putting it in the trash that this is the bag with shredded paper. I still compress down the contents in my bin a few times, and then pull it out as one big cube when it will not fit anymore, and kneel on it a few times to compress it further and get the air out. I've never had any problems with these bags.Honestly, this is simply the same as the bags that came with your Fellows shredder, if it matches the part number listed. I assume they are sized specifically for their shredders. If you are buying these for another shredder, then they still are bags, and probably work okay, just like using kitchen trash bags for anything else. I don't think they are anything special other than the right fit for the Fellows shredders by matching part number.

Works great for my fellowes 99ci shredder. Exactly what it's meant for. Doesn't tear while loading into the shredder bin

I actually use these as "dog poop" bags. They are big and long so what I do is tie off the bottom and use a small foot operated trash can. Handles a weeks worth of poop from a Great Dane and sausage dog. And for the quantity, cheaper than looking for the dainty 2 Liter liners that are sold for those small cans which aren't strong or big enough to get a good tie off when you have a full liner of nasty stuff. These aren't "hefty bags" so aren't really heavy duty, so don't be throwing any twigs or sharp items with the dog stuff as it will puncture easy.But have never had one just rip the contents as I take it inside to the final trash at the end of the week. Note that the bottom is "heat sealed" and sometimes if you aren't careful in pulling them apart you can accidentally be ripping into the heat seal rather than the perforation. This is why I tie the bottoms off before putting in the can as the heat seal holds, but can be the weak point (and you don't want it to open up somewhere obviously).Oh, yes, I got the idea from looking at our shredders at work. Which these are good for too!

Bags fit the shredder, but they are pricy

These bags do not fit my shredder - Fellowes P-58Cs - very well although they are the ones recommended and supplied by Fellowes.The problem is that there is not a level rim around the shredder's waste bin, there are cut outs for a window to see how full the bin is, as well as a section at the other end that dips down for the power cord and switch as well as the Safe Sense override switch. The window is rendered useless as the bags are not exactly see-through.They also make fitting the shredder head back onto the bin very fiddly, the power cut out switch is activated by a rib in the waste bin and unless the head is fitted exactly there is no power to the shredder.They would be great on a model with a level rim - they are quoted as fitting up to the SB-87Cs so it might just be the P-58Cs that they are fiddly to use on.Good points - these are the easiest plastic bags to open out that I've ever used. They do fit with a bit of persuasion.They are strong enough to use a couple of times by emptying them into a bin bag so the 11p each will stretch a bit further.They are certainly better than using nothing and having to pick up the bin to empty into a refuse bag.

These bags help to keep the shreds from making a mess inside the machine as well as on the outside, when you go to empty it. They're quite small - although obviously they can take the full capacity of the bin - so if you're doing a lot of shredding, you can go through a lot of bags in a short space of time. Nevertheless, they do keep the work area clean, so I'm pleased I bought them.

Pricy for a set of bags. Recommended for, but not specific to, my model of Fellowes shredder so not a great, tidy fit.

Extremely poorly manufactured bags. I do not usually leave bad reviews on products since "Errors" and imperfections do happen.However, only having one bag out of 20 being able to open without splitting on the side? That is unacceptable. Even bags from the cheapest pound shop allow to at least open them without breaking. These seem to be made of onion paper. Waste of money.

I was always fed up with emptying my shredder with bit of paper on the floor and the dust. These bags are great, not only have they cut down on the mess but you can get more in by continually pushing down the cuttings. Removal is easy and there is plenty of slack to be able to tie a knot and dispose of.