NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (Black)

This was to replace a no longer available front camera that I installed on my Toyota Tundra probably 10 years ago that had gotten very cloudly due to abrasions on the lens. This item used the same 4 pin connector so all I had to do was install the new camera and plug into the existing wire harness. It worked perfectly, image is bright and clear and is a more wider view than the old camera. This one is nice because it includes 3 angled shims so you can customize the verticle view angle, I had to make my own with the old one. If you're doing a new install, everything is included, even pry tool to help you conceal the wiring. Seems to be of good quality so I don't forsee any problems in the future.

The backup camera arrived on time and with everything you need. I purchased this camera somewhere back in October of 2019. At the time when I installed it, it did not show up on my head unit. I did not return it since it was my first time installing one and I figured I might have messed up somewhere. A week later I double-checked over my work and found that I installed everything correctly, it's just the T-Tap they provided did not connect the camera wire to my reverse light wire completely because the camera wire was really thin and the metal plate in the T-Tap did not tap into it. That was an easy fix which was to use traditional crimp connectors and bam, the reverse camera showed up on my Kenwood unit as soon as I put the car into reverse. I installed the camera on my 2005 Honda CR-V and the 1997-2006 CR-V's have the spare tire mounted on the door. Because of this, I mounted the camera as close to the center as possible without being too low as the main reason I wanted the camera was to see my bumper and make hooking up the trailer a lot easier. It sits on my bumper instead of hanging from the top of the license plate. If you do install it like this (Most people install like this on trucks) MAKE SURE TO CUT THE PURPLE WIRE!! Doing this will prevent the upside-down image as this camera is default a hanging from the top of license plate design. Overall it's worth the price, sure it may be a little more pricey than those $10 screw onto license plate ones but the picture quality on those are so grainy and look like sh*t at night. This camera gives you the option of putting it wherever and looks OEM. The picture quality itself looks like it would be from an OEM 2020 vehicle with a standard reverse cam and night quality is outstanding! Give this camera a shot, you won't regret it, I'm still using this camera as of June 2020 and the picture still looks as new as when I got it first installed and thats after all the rain I've also driven through with it.

I needed to bring my dad’s 2006 Toyota 4Runner into the 2019 so I opted to add a Sony XAVAX1000 CarPlay enabled head unit, steering wheel control adapter, and this NATIKA IP69K. This set up works amazingly well. Let me explain my experience with back up cameras and tell you about this one. My family’s first back up camera came with our 2012 Odyssey. I was impressed with the clarity and the overall performance of it. Our other back up camera is in a Lexus LS460, and that one was just nuts with how clear it can be. It was like a real camera was used. From there I have had several rentals and loaner cars and even though they were newer cars the quality was so bad. The video quality looked like watching something recorded from the 80’s. I am not sure if it was a camera issue, screen issue or something else but they were quite bad overall. Fast forward to now and I wanted to get my dad a quality camera so it would actually help him. I picked this based on the reviews particularly about the build quality. I liked that it had multiple colors of housing, I also liked how they included different padding to adjust the angle. One thing I debated was buying this model or doing one of the cameras built into the light models. After looking for a while I decided this model was so small and so pleasing to see (meaning you don’t even notice it) that I skipped the two in one unit. I took the items to BestBuy to be installed. The first thing I did was ask the installer to look at the camera and test it out. He told me it worked great, and he was really impressed with the build quality. He said the grade of cables used, how they fed in and out of the camera, and the all the packing, extra parts and instructions were very top notch. He said sometimes he gets cameras where it is just the camera and instructions in Chinese, and this was not how NATIKA did theirs. I am not sure what setting he used for it. I think online it says it has multiple ones. I asked him for the most basic/normal view for my dad with grid lines. That is exactly what I got Overall, the camera is awesome. It is so clear in combination with the Sony head unit I bought. I recommend this to anyone who needs a backup camera for their car. You don’t have to get one of those ugly huge ones that bolt on to the license plate. This one is quite incognito and looks OEM. Are there cheaper camera out there? Maybe. However this one is pretty affordable and has delivered for me and countless other people.

I’m giving the NATIKA Backup/Front View Camera 4 stars because overall the image quality and functionality are very good, but the waterproofing wasn’t quite as advertised in my experience. Installation was straightforward, and the camera provides a clear picture with good viewing angles both during the day and at night. The compact size made it easy to mount, and once connected, it worked reliably as both a backup and front-view camera. The video quality is sharp enough for parking and maneuvering, and it has been a useful upgrade for my vehicle. My main complaint is the waterproofing. After exposure to wet conditions, I noticed signs that moisture could eventually become an issue, so I ended up sealing the camera housing more thoroughly myself using silicone around the edges and wire entry points. After doing that, it has held up much better without problems. Aside from needing extra sealing, the camera performs well and offers good value for the price. If you’re installing it in an area exposed to heavy rain or car washes, I’d recommend adding some extra silicone during installation for better long-term durability.

So I looked around and ended up buying this one. It was worth the price. Bought this was a 2014 Hyundai Sonata My pictures show my lathing of the yellow vid aux to the trunk. I went via the bottom of the car as it was easier and I didn't want to take off airbag panels. But removing the lower panels is incredibly easy, though you will need to remove the back seat (YouTube on how to do so for your car if you actually need to), and just followed the wiring, zip tying as I went along. I cut a hole into that wire socket after taking off the back seat and pushed it through. Then removed the panels on the trunk, back up lights, the trim, etc (YouTube is your friend), drilled a hole into the plate light panel and snaked the camera power lead to the one from the front of the car. Picture quality could be better, I don't have an issue with 720p and actually think it's fine for most eyes (you don't need to see the pores of people in the car behind you). BUT it could be clearer, think though that the night vision might actually be messing with the lighting during the day and that's why. So the wires that come with the camera, you know the ones, the white purple and green ones. People looking and reviews and answers people aren't really clear, thinking that little info will go a long way. It doesnt and people need to learn to actually say what they do, so I'll clear that up below. Green: the back up guide lines you see telling you how close to something you are(blue, yellow, red) cut this if you don't want those. Purple: horizontal or vertical viewing. Leave kf you want horizontal, cut if you want vertical. If you have a sedan or your trunk lifts up, leave it be. Anything else, like a truck that has a latch or the trunk flips open like a door, cut it. White: flips the image. So basically this is a preference. If you leave it alone, looking at the screen in your car when in reverse. It will be like if you were looking straight ahead. Right will be right left will be left. If you cut it, right will be left, left will be right on the screen. I left it as it cause it's easier. The angle(170°) is actually really nice and let's you see pretty much everything, which I like. The video I placed was at sunset, and you can see the quality is pretty good. Nothing earth shattering but it'll do it's job. I'd like to see how this hold up as people say it dies in a could of months. Though I'll see how it goes and probably just buy one for a bit more money if that happens. But so far I really like it. Will update in like 5 months

I purchased a NATIKA Backup/Front View Camera and installed it while waiting for the parts needed to install an aftermarket head unit on my 2008 4Runner. During this time, I decided to test the camera using a TV monitor, but unfortunately, it did not work. I reached out to customer service, and they responded promptly and provided detailed instructions to help diagnose the issue. Despite making some wiring changes and checks as instructed, the camera still didn’t work. Jason from the service team arranged to send a replacement camera, which was extremely helpful. While waiting for the replacement, the parts for my head unit arrived, and I went ahead with the installation. On a whim, I decided to test the camera again with the newly installed head unit—and it worked perfectly. Although I couldn’t pinpoint the issue when using the TV monitor, I was relieved and happy that everything worked out in the end. The camera’s performance, both day and night, is exceptional, delivering clear and reliable quality. It also matches the car well, with an OEM-like design that integrates seamlessly and looks like it came with the vehicle from the factory. Beyond the product, the customer service was truly outstanding. Jason’s prompt and generous support made a significant difference in my experience, turning a frustrating situation into a positive one. Thanks to his help, I now have full confidence in recommending this camera to anyone looking for a dependable product backed by an excellent support team.

My son and I installed this camera on a 2011 Silverado and placed it on the side of the tailgate handle. The camera feels very solid and the cabling quality seems good. It is connected to an Eonon GMAS12-U head unit. We needed one of the shims to raise the angle so we could be closer to the horizon while still seeing both corners of the bumper. Since the camera was already installed in the tailgate before we turned it on to check the angle, we couldn't slide the shim through the cable to wrap around the threaded rod, so we just cut the shim into a horseshoe shape and taped it to the camera. Worked fine. In the garage at night, with the lights on, the image quality was really good. But when I took the truck to check it in less light the image quality was REALLY bad. Under a parking lot light, the image was oddly too bright and had too much contrast in addition to "snow". In a darker part of a parking lot, the contrast fixed itself but the image was still really grainy. We're going to keep it. (I don't want to run all of those cables for another camera model which may not be better) It's still functional at night and excellent during the day. I think for this price range, it's a good product.

I installed this in my 2012 Camry SE earlier and i'm super happy with it. My car has the super white toyota paint and the white camera matches it basically perfect which is nice. Backup cams can be a little confusing to wire if you haven't done one before or aren't familiar with 12v but i was happy to see the instructions very actually written well to help those with little experience. The kit comes with plenty of wire, i ended up with about 4ft of excess so should be enough for just about any small to midsize cars and suvs and maybe pickup trucks depending on the length but you can always get an extension for the video rca back and extend the trigger wire super easily if that's the case for you. The quality of this cam is great, matches or exceeds many oem reverse cameras i've seen even on new cars. All in all i'm very happy with this camera and i look forward to using it for years to come.

Very good camera. Picture is clear and looks like oem

Works great. Good vision day and night

I got this camera to retrofit my 2007 Corolla. It worked like a charm and looks great, it has all the looks of a stock camera. Very solidly built, easy to install (you make only one hole in your car, maybe 2 in my case). Image is crispy clear. More than happy with this purchase.

My OEM camera won't work with my new headunit, this camera has a nice finish and is hardly noticeable on my car. I have it mated to a Sony XAV-AX6000 and simple cutting the wires to change orientation and remove guiding lines is a great future, one thing I want to mention is cut wires in the middle incase you cut the wrong one and need to join them back together, the paper instructions aren't that clear I went back to the instructions on this listing to understand their terminology.

The camera was great, clear image, solid build and looks close to a factory finish. A couple of months short of 2 years, it stopped sending a signal to the screen. I bought another one, because we were happy with the performance of the first one. Then messaged the company about what had happened (not really expecting a reply, let alone a refund) and they sent me a full refund for the original camera. Would definitely buy again if the need arises.