PIT66 LED 3rd Brake Light

Fits perfect! Exact connector I needed and the LED's are much brighter and should last much longer

Very easy to install; looks good; priced right.

Fit my 2005 f150 perfectly. Only problem I had was that the electrical connectors on my truck were dry rotted so you might want to plan for that if you have an older vehicle like mine.

Fit and looks great. I did silicone around the edge for added protection. Been working fine for 6 months

Product was delivered super fast but it has issues. Pros: Cheap price, less than $20 is about as low as you'll fine Looks good. Smoked finish an LED configuration looks nice. Cons: Fitment is not ideal. The seal around the perimeter of it looks thicker than the original (which may be a good thing if it seals it better) but it makes it stick up higher and has a visible gap between the housing and the cab. The plugs which mimic light bulbs don't fit into the socket. This is the biggest problem and the reason for the 3 star rating. They do not plug in. I had to trim them down to get them to fit. On one of them the socket was damaged when I tried to trim it so I had to replace it, luckily I had one sitting around. This turned a 5 minute job into nearly a 1 hour job. Other points: Smoked lenses cancel out benefit of the LEDs, LEDs typically mean a higher output of light but the smoked lens makes it no brighter than the stock bulb. Not a big unless you bought this wanting more cargo lighting

LED light red red whit white

physically, this fits fine, and it comes with a new gasket. All good. But, the wiring is odd. On the factory light, the bulbs go into a socket, and the socket is locked into the light - like every light you have ever seen. This one, they have 3 wires, about 8-10 inches long, that are designed to plug in to the original sockets. This is good, in so far as you do not have to do any wiring, just remove the old unit, remove the bulbs, plug the wires in to where the bulbs used to be and done. BUT - now you have an extra 8-10 inches of wire, and a plastic bulb socket loose to bounce around under the light, and make noise, plus could come disconnected. What would have been better would to simply have the "bulb" connectors directly on the new unit, with no wires. They could have had plastic frame to hold the oem bulb socket, just like the oem light. The extra wiring is not needed, and is actually a problem. I am keeping the unit, and will use it when the next bulb burns out, but I will end up using a bunch of zip ties and potentially foam to keep things tight.

item is as described, super fast delivery