UltraProZ-Wave Smart Rocker Light Dimmer with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle Only, 39351

I wanted to update and upgrade my alarm system and home automation. Found these and they are much more reasonable in price then what the alarm companies are selling or recommending. My only grip was when you have to do a 3-way set up, you still need 2 switches to do it. Some other manufacturers allow you to use a standard paddle switch and just have one z-wave switch. Not a big deal, but a way of giving the consumer more bang for the buck.I ended up replacing 14 switches throughout the house. The Qyolsys Panel 4 learned all of them without a hiccup! Everything is working flawlessly through the app and manually. I like that the blue light can be programmed to be on when the switch is not in use and works as a night indicator at the same time. They look great, even when located next to a standard paddle switch.If you are comfortable installing or changing out an electrical switch, you'll find these a breeze. One thing that stood out is the double inlets for each wire. It really makes it easy when doing multiple switches next to one another. You can bring the wire into the first inlet and use the second one as an outlet to feed the switch next to it.I would recommend these to anyone wanting to get into home automation! Hope to see some z-wave wall outlets in the future as well!

I have used this brand/model of switches a few times in my house and have had great luck. Once installed it’s fairly easy to pair. Just start inclusion mode and tap up or down. If you don’t see the switch being included. Then start exclusion mode and tap the up or down once. The try again.Setup is easy if you have a neutral wire already (you’ll typically see a bundle of white wires in the dumb switch box that don’t connect to anything).This switch is the main switch if you are doing a 3-way etc. you’ll need the dimmer add-on switch to do that setup. Be sure it says Add-On or auxiliary. I only tried with this same brand and it worked. You may have luck with the GE Enbrighten as I think that they are both made by Jasco.Special note about LED compatibility and these smart switches:You need X amount of watts on your circuit. I think it’s 25W-35W? So not all LEDs will work well with this setup because there’s not enough power.Second, LED dimming is different than incandescent dimming. It’s due to the electronic component differences. So not all LED designs are compatible with this switch. I think I did see on another review that this is a TRIAC dimmer. You’ll see a flicker at all ranges of dimming if this is your issue. If you see a flicker only near the max or min of dimming, you can adjust the switch’s max and min to not reach the flicker stage.Between those two issues, I was unable to use this model pairing on my retrofit Halo lights 4-in 60-Watt Equivalent White Round Dimmable Recessed Downlight (RA404930WHR). I will need to use them elsewhere in the house since I bought then so long ago. For those lights I bought Inovelli’s dimmer switch and it works well. However, The Honeywell add-on dimmer switch did not work for me with my Inovelli dimmer with my LED setup.

Easy to install and use with master switch. Saves money on buying the more expensive switches.Responsiveness is bit sluggish. It can take up to a second for the main dimmer to recognize this has been pushed.It also seems to get confused with the dimmer master switch. I can hold the top paddle to increase brightness to a point but then must push the down paddle to go to 100%.Another nice to have would be an LED indicator if the light is on or off like the master switches.

Perfect pairing with SmartThings.Turn off the blue indicator light (blue LED) on the switch by pressing the up (on) 3x fast, then down (off) once. This has to be done quickly, but will turn off the blue LED. Do the same thing to turn it back on. I found this a must for the bedroom switches as the LED is way too bright, but is perfect for other areas of the house to find the switches at night.Pair the switches up with motion sensors in each room and automate your lighting. Set up multiple scenes / automations for different brightness levels based on ambient light or time, or disable them from coming on automatically when in a certain mode (bedtime).I had installed motion lighting in another house of mine, but this is taking it to another level that just makes more sense. All lights and fans turn off when we leave and set the alarm, then select few turn back on when we arrive. It's so nice to not have to use switches throughout the house anymore as our lights and fans are automatically controlled for us, and turn off on their own based on certain timers, different for each area and its purpose.These switches are very responsive and I am very happy that they have the dim on and dim off feature as it just gives your lighting automation a much warmer and welcoming feel. Paired with some dumb (but smart) Phillips dimmable "Warm Glow Effect" bulbs and you can control the temperature (white vs warm white) with a bit more variation depending on the time of day / night. A much cheaper alternative than buying smart bulbs to let you control the temperature.Setting up the 3 way was quick and easy. The 4 way was a bit more difficult but that's because of how my electrician had the original switches wired up, which I eventually ohmed out and figured out what was going on. If you need to do a 4 way (3 switches for a light) or more, and you're not an electrician or handy with this sort of thing, consider calling somebody over that can figure it out for you as it took me hours to figure out how it was wired up and configure these properly.

J'adore ce dimmer.

Funciona sin problemas con Hubitat Elevation, muy confiable y llegó antes de tiempo. Ya configuré incluso el doble click arriba y abajo con escenas para "trabajar desde casa"

No surprise, both being made by Jasco, that this switch is pretty much identical to the GE Enbrighten dimmer. Works as expected!

This was so easy to hook up as it detected the traveller automatically one a 3way no other smart switch has worked. Connected this one to Home assistant so basement lights come on when motion is detected.Used the second to add a dimmer to the foyer light and connected it to Alarm.com so when the door opens in the evening the light comes on for 5 min.

Total waste of money. Was using GE Zwave switches and they die within a year so tried this brand. Did not even work once. Went into the garbage. Switch was stuck in rapid toggle on and off.