Hide-A-Line 3 7.5 Ft Mini Split Air Conditioner & Heat Pump Line Set Cover Kit Decorative Tubing Cover by Hide-A-Line

The channel tubes are well made. The fittings were very poorly moulded and made of cheap brittle plastic. It did the trick but I would hesitate to pay more than $35 for this kit.

This was easy to install and surprisingly it made the mini-split install easier. You install half of the base half of the cover which gives you a good perspective on where you need to guide your lines and cables. I use zip ties to help me during this process. Once everything is in position and taped up it was a simple matter of putting on the cover (outer halves). The size accommodated the refrigerant lines (insulated), drain line and control cable, not to loose and not too tight. I bought two kits as I needed two wall 90's. I do wish they would have options just to purchase the fittings. As you can see in the picture I also used some 2" Black Convoluted Split Tubing to protect the refrigerant lines from UV. This was much easier than using the wrapping pvc tape typically supplied with mini-splits or using this cover kit to protect it. Got the tubing here on Amazon. I am happy with how this came out, both in appearance and function. So it gets my recommendation.

Good quality. Easy installation. No complains.

Worked great and easy to install.

These were easy to install and initially they looked great. After about 6 months the connections started turning yellow and are now almost brown. If you plan on painting them, this shouldn't be an issue. The other concern was for the mini-split I installed the lines were larger and barely fit inside the tubing causing condensation to build up on the outside and run down the front(not aesthetically pleasant). If I did these again I would look for a larger size if available and probably paint them immediately.