Rough Country 1.5" Wheel Spacers for 97-06 Jeep Wrangler TJ | 84-01 XJ - 1090RED

Ideal with Steel wheels I got these for my 1999 XJ with ZJ stock 16x7 wheels to allow my wheels to clear my Barnes 4WD Heim steering and control arms at full turn radius. These fit on the jeep perfectly but then when I mounted the wheels the studs were 2 threads too short for proper thread engagement. The issue I learned was that the Rough Country spacers are made to run with the thinner mounting surface steel wheels have. So if you're trying to run aluminum wheels you may need to go the route I did: - Ordered some YHTAUTO 1.5" spacers through A-premium.com and they got studs 4mm longer. $110/4 spacers. I give this 5 stars because I have a 1996 XJ that has steel wheels that I need spacers for.

Fit my Kubota BX2200 tractor but the outer edge contacts the inside of the wheel and will slightly spring the wheel when lug nuts are tightened. To solve this problem I added 2 - 1/2" washers to each stud to space the wheel approx. 1/8" which allows tightening the lugs without springing the wheel. The 1 1/2" spacers work well with the 60" belly mower, 2" might fit but would be very close to having the tire rub the deck wheels. The quality of the spacers is excellent.

Perfect fit

Realy nice quality from a known brand of parts.

I’ve had them on for a month now. No issues.

I used these for my 2001 jeep Cherokee XJ. Good price and fit right the first time.

Matching looks good, but the studs should be longer. The lug nuts do not fully thread onto the studs. I’m using them on a low speed tractor, so not a big issue. But I would have serious reservations about using them at highway speeds.

Added these to my ck Cherokee to help with tire clearance on the lower arms. I seem to be getting a small bit of wheel wobble if I hit a small dip

Excelente se lo puse a mi sahara 2001 y se ve muy bien y no vibra ni se siente mal.

Installed it on a Jeep TJ 2001. Didn't vibrate on the railway at 120kmph. It does not come with thread lock, had to buy it separately. It's an US American brand, but it is made in China.

Perfect spacing for me. 2000 XJ. Nice product. Some of the other reviewers reference thier concerns of the provided lug nuts not grabbing enough stud threads on the back. if you use a provided lug nut in place of a factory lug nut on the rear wheel prior to removing wheel rim, as a visual comparison of the fastener, you will see that they also only grab around half the threads. Can't see that with factory chrome capped lug nut, but that's all they are clamping with also.

I used these on a 2010 ranger 4x4, rear axle..fit perfectly, no issues and nice quality. Will buy again.

Compatible con ZJ's