Innovited 55W AC HID Xenon Conversion Kit All Bulb Sizes and Colors with Digital Slim Ballast - H1-6000K - 2 Year Warranty

So far so excellent. Initially after installing the 5000k headlights in my 2013 Prius, I noticed a slight difference in color between the two bulbs. After contacting innovited customer service, they quickly responded to my concern and then three days later, I received replacement bulbs. Innovited provided truly excellent customer service.I've tried four different 55w HID h11 kits from Amazon and three l these are the best (Including their awesome customer service).Now we wait and see how long they'll last...

the product was hard to install on the original headlamps, but they were easy to installed on the new aftermarket, as soon as I turned them on they started flickering, so i turned them off and check all the connections, I order flicker capacitors and they still flicker to the point that one of the bulbs burned out, I try to contact the seller but there is no option to do so, so I have no choice to write this review, now I had to purchase another set of bulbs so I all ready lost money, so we all see if this time it work with the anti-flickering and relay if not I will return all the items and buy else were

When my old HID kit burned out after about 4 years I went looking for a new kit. I purchased one HID kit and later a set of HID head light bulbs from competitors. I was SHOCKED that although they had the proper size in the add and on the bulbs, they did not fit. They would fall out of the headlight housing with the slightest shake.That's why I was so happy when this kit came in. The bulbs went in easy and fit nice and tight, just like oem bulbs. The 6k color temperature matches my led turn signals and fog lights when these come up to temp after a few seconds. I can see farther than any LED, 35 watt HID, or oem bulb. These are great! Thank you!

Great HID kit, slim ballast, easy to install.. directions and fault diagnostics are accurate..Just make sure you order a warning canceller if your vehicle requires one, or you will be extremely disappointed when you start your vehicle up and the HIDs shut off/kick a warning. God speed.

Installed these on my 04 Nissan Titan in spyder headlights. Huge improvement over stock. This is a universal fit so depending on application u may need some modifications. I had to cut n splice wires to put in projector housing no big deal just use good marine connectors. I installed high n lo with 2 kits got a bit confusing doing all at one with so many wires going everywhere n placing the ballast in a good spot was prob the toughest part. I highly recommend using 3m two side body molding tape to install ballast, just peel n stick but make sure to clean area well first way better then drilling holes n bolting on. Once on there not moving. Also as a note of caution do not use these in a normal lo beam reflective housing u will blind everyone so don’t b that a hole. Hi beam is fine. May also want to install a relay wire harness directly to battery. At first I didn’t n had issues with noise n some flickering. Highly recommend the relay and get instant power less warm up time. Overall so far really like them, way brighter just make sure u adjust them up or down cause u will blind oncoming traffic.

The good news is they work and they look great! The bad is one of my clips literally fell off out of nowhere while installing. It looked like the crimp inside didnt crimp the wire enough so i had to shove the bare wire in the other end and tape them together. Not happy about it but it works

I installed these bad boys (2017 Ram 1500 - 9005 - 5000k) back in September. I fell in love with them and had no issues with the install. I followed youtube channels and made sure to wire the system without getting a code error. Today, however, the bulbs would simply not turn on. The only difference between September and now, is the temperature. On this fine 28 degree November winter morning, they wouldn't work. I know the bulb is still working because after it warmed up in the afternoon (42 degrees) they worked just fine. So, my conclusion. If your area is cold don't go with HID, they won't turn on if it's cold out.*Update:* I contacted Innovited directly about the issue. They sent me a replacement pair right away. Never said the issue was my fault. That’s customer service!

This worked great for the first month I had them and then the other night I was driving home from work in the country when I put the highbeams on as soon as I turn them on the lights cut off when I was in a curve. I almost had a wreck because of these hid kit, not the greatest quality. The low beams work just fine but the highbeams will come on but cut off after 3 or 5 seconds. Since I posted this the company reached out to me to fix the problem, so far so good. I found out it was the wiring harness causing the problem.