4x32 Scope Prism Scope Red Fiber Scope Black

It’s actually really nice, the eye relief is absolutely terrible but other than that it’s a nice optic for the price

I have this on my Aye Are fifteen and it has worked amazing so far. Doesnt knock off from kick. Might knock off a little too easy from being hit or layed down too aggressively.

This is a clone of the TA31. Illumination is excellent. First ambient illuminating reticle for me. I direct sunlight it's not too bright. Turrets are point of impact meaning from your point of view you are making the bullet go up for up and right for right. The range I took it to uses yards to set up steel, not meters. The TA31 reticle is in terms of meters. Successful hits at 12 inch steel at 500 yards, 400, and multiple hit confirmations at 8 inch steel at 150 (137 meters) yards (successful hits at 5 or more in a row). There's about a 10% difference between yards and meters. It matters, but in this case it worked out. I didn't think id get this to zero. Does not come with instructions. Close to TA31s half moa per click or near. I decided to try for the last time by holding chevron tip on bullseye and trying to get groups at 5 moa low at 10 meters on paper (Google ai said this would reflect an approximate 100 yard zero). After that I basically zeroed by placing the 400 meter etching on a 400 yard target (it takes too long to walk that far, they already had steel set up there, and paper target berms are not set up for meters when using their target stands). Made a 5 moa up vertical adjustment based off visual impact inspection at a 400 yard steel round and then brought it back down 3 moa (or whatever i did). After that i was able to hit 400 yard steel with the 400 mark on the reticle and then 500 kentuckying for wind (55 grain). Being able to hit those at that distance isn't an accident, even hitting them just twice, and it wasn't in a row like at 150 but it was more than once. According to the TA31 instructions, which this is a clone of, you zero at 100 meters by placing the tip of the chevron in the bullseye. At 150 yards I'm hitting steel, easily at least, by placing the legs of the chevron in the center of an 8 inch round. I would zero this on paper at 100 using the legs of the chevron as the impact point if you don't have steel to shoot at. I would confirm zero if you can with a range's steel set out at 400 and make some minor adjustments to try to get impact at that distance. If you can hit at that distance it's not an accident. All things considered this is excellent for 60 dollars. If the company would just do a little bit of quality control this is a famously good acog clone. Edit: (Regarding the following, it's actually just an illusion of the illumination smear at the very top of the ranging reticle) The centerline was off by about a tenth of a millimeter with the center of the chevron. I didnt notice until after a satisfying zero. Edit: It's not off.

This scope is all I need out to 400 yds. It is crisp and perfect.best value for the price.

The rectangle in the scope is not centered and off really bad.

I took my time to zero it, four groups of 3 shots, here is the final. The reticle is impressively clear. It mounts correctly, and the 4X magnification is good. Eye relief is short to about 1.5 inches away, yet forgiving enough to back out some more and will not affect aim. The question will be can it hold zero after a reasonable amount of rounds, time will tell, but I do recommend this optic for short to mid range use. Very effective. Buy confidently, it will do the job no doubt.

I love this optic and used it for a 5.56 AR build. I was skeptical given the price point, however, when I took it down range it was quickly zeroed and I was driving nails with it in minutes. I used an ACOG for 20+ years in service, and I barely noticed a difference with this product. As mentioned by others, the eye relief is a little tight but not really an issue. Update: it lost it's zero the 2nd time to the range, and then wouldn't adjust. It was as if something broke inside and the windage and elevation no longer worked. That very disappointing, given its initial performance. I also missed the product return window.

As expected. Built nicely. Looks and feels like the real thing. So glad I opted for this before buying the real optic. Would have hated the eye relief (known for Acogs) and never be used. Spent minimal on this compared to $500+ for surplus used or well over $1000+ on new. May still buy a real surplus Acog to replace this for the shelf, but not new.