Bathroom Exhaust Fan with LED Light – Easy Retrofit Without Attic Access, Quiet 0.9 Sones, Effective Ventilation at 60 CFM ENERGY STAR Certified Moisture and Odor Control

Really great fan. Quiet. Works well.

Easy install, good light and vent functions

Great! Product, very good quality very easy to install easy instructions new install or retrofit install. Worth the money. Also very quiet motor. I get another to do the next bathroom.

So far it looks great. Had my electrician put it in, it's working great! Really bright and nice. Makes my bathroom look better honestly. The fan sounds quiet but powerful!

Looks very nice and does the job

I recently installed the Broan-NuTone 678 Ventilation Fan and Light Combo in my bathroom, and I couldn’t be happier with the results! This unit is powerful and efficient, with the fan doing a great job at clearing out humidity at 50 CFM—perfect for a small to medium bathroom. The light is bright and distributes evenly, making the space feel well-lit and inviting. Installation was straightforward, and it fits perfectly in my existing space. Plus, it runs quietly, which is a nice bonus. Overall, this fan and light combo is a fantastic value for anyone looking to improve ventilation and lighting in their bathroom! Highly recommended!

I'm converting a closet into a bath as an addition to a 1½ bathroom. I shopped around for an exhaust fan and was skeptical about buying the Broan 678 Ventilation Fan and Light Combination, 50 CFM and 2.5-Sones due to the many comments here about rattling-vibration noise. But because of the low price I decided to give it a try. I received and after some minor adjustments, got it installed and it works beautifully. I also added a 4.5 watts LED light, which makes it appear more expensive. It's also quieter than the one installed by the 1½ bathroom, so I'm purchasing another one. Here are some suggestions: Rattling noise is created when components vibrate against each other. An easy fix (it worked in my case) is to get a tube of caulk (I used clear instead of white) and caulk every area where there's a joint, even at the outlet where the duct with the flapper mounts to the fan. Just take your time and make sure to get every single joint. When mounting fan to a joist, use screws instead of nails. Nails can begin to back off due to fan's vibration. Also, place some type of insulation between the joist and the mounting plate of the fan to dampen vibration. I used a piece of ¼" thick rubber. After the fan is mounted, use a can of foam insulation and spray the foam around where the fan casing meets the ceiling. As the foam expands and hardens, it will provide additional support to the fan, making it more stable. As an added bonus, you may also prevent your AC from escaping around the fan. When installing the light housing, make sure the nut that support the housing is tight. Don't use just the nut to get the light housing tight against the fan housing, instead push the housing with one hand while tightening the nut. By pushing with your hands, you'll feel whether or not the housing is well seated. Finally, tie the electrical wires or tape them together and to the fan housing. Wires, it left loose will vibrate and may create noise. A vibration noise like a loose wire may not be enough to be bothersome, but add the many places an exhaust fan can vibrate and it can drive anyone nuts. However, with some preventing measurements, this fan will sound and look good without breaking your wallet (or purse for that matter). Note: I could give it a four start due those loose joints issues, but with such a low price and the easy fix to those issues, these exhaust fan is a great product.

The fan looks modern and the LED light is nice and bright. Installation was fine and it works as expected, but it is a bit noisier than I anticipated. Overall decent, just wish it were quieter.

Venting functions as intented ; installation was relatively easy ( most of the problem is drilling the hole to the outside and running the 4" tube) Installed in basement washroom that's underneath a room. you can definitely hear a very faint hum from the bedroom if you listen real closely but not enough to disturb sleep. the "in bathroom" noise is on par with our other nu-tone if only a little bit louder. The Ive installed a 5000k 100w equivalent bulb and it definitely is not enough to light up the whole room, even as it is installed in the middle of the room. so a vanity light and a shower light IS REQUIRED.

Excelente calidad!

This was a replacement for a similar fan and heater lamp combo. Didn't need the heat lamp on the old one but I liked the light as it brightened up the rest of the room. And my old fan sounded like an airplane taking off so this one is a godsend. Its loud enough so that I can hear it running, but not so loud its an annoyance. Excellent purchase!

We ordered this fan/light combo to replace an existing fan that had stopped working. When we were unable to find a new fan in any of the home improvement centres, we found this one. The fan was slightly different ( 50 CFM verses the existing 75 CFM unit). The new unit took less than 20 minutes to install as everything connected in the right places.

super