NinjaBatt A1466 Battery for Apple MacBook Air 13″ (Mid 2012, Mid 2013, Early 2014, Early 2015,2017) A1369(Late 2010, Mid 2011 Version) A1405 A1377 [7160mAh/54.5Wh/7.6V]

This was the correct battery fo my old 2013 MacBook Air and was comparatively easy to install. Much easier because this version doesnt have the sticky glue that older ones have. So my techie friend was able to do this within an hour. Good choice on my part. My laptop is working just fine.

Perfect replacement for the MacBook A1502 Only issue was the included instruction sheet pictured a different model illustration. No problem tho. Works fantastic!

The battery was exactly as advertised. It fits perfectly and has the rated capacity. We’ve gone from 20 min on an old (original!) 2014 battery to a minimum of 6-7 hours of use from 100% down to 10%. This may grow with several additional cycles from 100 to 10%. The price is very reasonable and it was a nice touch to include the 2 screwdrivers required to do the job. This was a very easy replacement to do. Well done, NinjaBatt!

The MacBook Pro started immediately after installation. That's always a nervous moment. I am using CoconutBattery to check the specifics. It is a Simplo battery, which is one of Apple's genuine suppliers. Full charge capacity is 6600 mAh, the same as my original battery. Battery temperature is fine at 79.4 F. It is indeed a new battery at 0 cycle count. On startup the battery was at 60% capacity. I am beginning the calibration process. The only issue is manufacture date. This battery is more than 8 years old, manufactured on March 30, 2015. That variable seems to be pot luck. I recently ordered a replacement battery for an older MacBook Pro. That was also a Simplo, manufactured in mid 2021. Installation went fine, using a couple of YouTube videos. I recommend the OWC version because it uses the fewest number of steps. Other videos remove items that are not in the way. Also, solvent is not necessary to loosen the old battery. I used a small flathead screwdriver to patiently cut through the paste. There is an opening at right to get started. Once that cell is lifted out of the way it's easy to access the next one. Make sure to totally drain the old battery before beginning. These are dangerous batteries if breeched. I allowed the MacBook Pro to go blank then I restarted more than 10 subsequent times to get closer to absolute zero. Hold down the power button for roughly 10 seconds then release. The Mac will begin the startup procedure. It will steadily cut itself off quicker each time. You're good when the Apple logo no longer appears. I took the extra step of removing the heat sink and replacing the thermal paste, using a video from Luke Miani. However, he errs in spreading the paste on the smaller silver chip at right. That one is not supposed to be covered. I used Arctic MX4 paste instead of the one he recommended.

Replaced an 10 year old in an MacBook Air. Installed in minutes with the provided torx screwdrivers. Follow the instructions for initial start-up and charging cycles. Installed two weeks ago battery performance is as good as new.

Battery not charging anymore after few months. The seller is not responding to talk about the warranty and, Amazon service asks to contact the seller. What a waste of time and $

I was worried about changing the battery on my MacBook Air, being that mine is 5 years old. After watching a YouTube video that suggested NinjaBat, I ordered one on Amazon. Just follow the video and it tells you step by step. It also comes with complete instructions. You get the battery and the special screwdrivers needed to change it out. Make sure to keep the screws in the proper place, a few are different sizes and they are very small. So easy! My laptop works great now. No need to buy a new one. I’m very happy with this product.

Works great on my 2015 Macbook air. Installation was very easy . Tools( speciality screwdivers ) are included for installation . Installation went fast. Mac runs like new . Giuzq proce

I put this into a Macbook Pro 13" 2017 (A1708) for my daughter. The original Apple battery was reported to need servicing. It is always a chore to remove the old battery as it is well stuck on the chassis. The battery does *NOT* come with a ribbon cable for the battery daughter board to the main logic board so do take care in keeping the original cable. Installation went well. Battery only had 5% charge so needed to run a full charge cycle. Coconut battery app reported the battery to be manufactured in April 2022. This is not too bad as I have had batteries from other companies sitting on a shelf for years. I can't say how this will perform as only time will tell. Some replacements I managed to eek out years while others only under a year.

One of the screwdrivers doesn't fit, and I haven't been able to change the battery yet. Please help!

Super easy to install and use for my 2010 MacBook Pro. It's not much better than the OEM but definitely last maybe 60-90 minutes longer.

Obwohl es zunächst ein Problem mit dem Warehouse-Artikel gab, hat der Hersteller schnell und problemlos für Ersatz gesorgt. Super Service!

Very easy to install works great and happy with it so far no issues and great value for money. Only thing is did not come with instructions to install and how to install but because I installed one previous before on a different laptop I knew how to do it but you can easily find a you tube video on how to do it.