ID-COOLING FX360 INF 360mm Liquid CPU Cooler, AIO Cooler with ARGB Infinity Mirror Effect, 3x120mm Daisy-Chained Fans Low-Noise Operating 27.2dB(A) Max., Intel LGA1851/1700/1200/115X & AMD AM5/AM4

The media could not be loaded. I recently installed the ID-COOLING FX360 INF 360mm AIO liquid cooler in my new build, and it’s been a fantastic upgrade. First off, the cooling performance is top-notch — it keeps my Ryzen/Intel CPU running cool even under heavy load, with temperatures staying impressively low. The included 3x120mm fans are quiet, even at high speeds, with a max noise level of just 27.2dB(A), which is great for a near-silent setup.What really sets this cooler apart is the ARGB infinity mirror on the pump — it looks absolutely stunning in a tempered glass case. The lighting is vibrant, smooth, and syncs easily with my motherboard’s ARGB header. The daisy-chained fans also simplify cable management, making the installation much cleaner and easier.Mounting was straightforward, with clear instructions and wide compatibility across both Intel (LGA1851/1700/1200/115X) and AMD (AM5/AM4) sockets. The build quality feels solid throughout.Overall, this cooler combines performance, aesthetics, and ease of installation in one great package. Highly recommended for gamers and PC builders who want both form and function.

This water cooling setup has exceeded all my expectations. It works flawlessly—keeps my CPU running at the perfect temperature even under heavy load, and it’s whisper quiet while doing it. Installation was straightforward, and the build quality feels solid and reliable.One of the standout features is the LED customization. The fan lighting patterns are fully customizable, and the software makes it super easy to set everything up just the way you want. Best of all, the configuration actually saves and loads correctly—even across different operating systems—which is a rare and very welcome surprise.No complaints at all so far. If you’re looking for a high-quality water cooling solution with awesome lighting and zero hassle, this one’s a great choice. Great value for the money.

I built a computer for an arcade I was building and didn’t know what I needed to run the emulators. So I used an i9 14900k with an Asus ROG Strix 4090 OC because no one would tell me what would work. So, I used the motto go big or go home. Needless to say it was overkill and then I find out that the i9 runs hot and my DeepCool AK620 worked for the emulator games, but not for AAA Steam games. My CPU kept thermal throttling.I purchased an Artic Liquid Freezer III 420, but was unable to get it to fit into my Lian Li Lancool III case. So I purchased this ID-Cooling FX360 INF since it got great reviews from those who do PC content.I’ve had this now for about 2 months and I’ve never had an issue with thermal throttling since. The highest temps I’ve seen is 70C-75C and that was during a CPU-Z stress test. Idling I’m around 30C-32C and playing 2 AAA games (Indian Jones & Hogwarts), at 4k, the highest I’ve seen is around 60C.This AIO has worked flawlessly and like a lot of people have said, it was really easy to install.Because it’s inside my arcade pedestal (and fears of my CPU over heating) mines set to run at 100% all the time and the fan noise isn’t bad at all. Those that complain the fans are loud or the pump is loud, I wish they were around in the 80’s and 90’s when fans were extremely loud!! They’d think twice about calling these loud. Only time will tell as to how well it holds up.

Got this for a new build and it works great so far. About the same noise level as my previous AIO (an EK 240, which was pretty quiet), perhaps even a bit quieter during heavy loads/doesn't ramp up as much. It does seem AMD runs a bit warmer (always been an Intel guy), but this cooler keeps my Ryzen 7800X3D at around 40°C idle, which seems to be the average temp for others with a similar setup.Only minor complaint is that it was a bit hard to line up the screws of the pump with the brackets on the motherboard to mount it. The spring-like things on each screw give a bit of resistance when you're screwing them down, so it takes some steady hands. Other than that, it was pretty straight forward, and the included instructions were clear. Also worth mentioning there's no pre-applied thermal paste - a tube of generic thermal paste is included to manually apply (still need to make sure to remove the sticker on the bottom of the pump)The logo on the AIO can be rotated, so it's designed to be mounted with the tubes facing any direction you want.

Works pretty well butmi shoulda got the 3 fan version. Keeps cpu around 50-55 or so,Celsius. Quiet. Not,crazy about the lights so,I turned em off.

Seems to work great. Have had it for about a month now and have had no issues. Looks very good and keeps the temps. Had an issue finding the right software for the water block RGB, but ended up getting it working and I love it. Price to performance makes it a good deal and id probably get it again for a future build.