AutotekATOOCALBK250 Brush On Brake Calliper Paint, Black, 250 ml

This product works very well, and is very easy to apply however it is much easier if you prime the calipers first with a high heat primer, otherwise you will need to do two to three coats in order to get it completely opaque. Just doing one coat will leave very small streaks, also use a good quality brush as this paint get very sticky and will pull the bristles out of a cheaper brush.

For the amount of paint you get I thought it was a lot of money, but I painted all four calipers twice and used very little from the tin. I spent time cleaning the calipers with a wire brush and break cleaner fluid. Then just simply painted on with a 15mm paint brush followed the instructions given . They have come out 1st class with no blisters or paint line marks. A very smooth finish. I would highly recommend this product for ease of use and excellent finish product.

Bought these to paint the new brake drums on the car as I really didn't like the look of the rust. This paint has made a huge difference. Take a while to dry and at least 24 hrs to become fully cured. Following the instructions is a must and would work even better in a warm and dry environment.

Bit sticky when applied, take the time to do it properly and It’ll be fine.

Good to use dry quick and the final results looks very good excellent in fact will definitely be gettting again

Does what it says in the tin.

This stuff goes a long way as I only used about a quarter of the tin to paint four calipers and the rear hubs. It goes on easy and covers well but to do a really good job, you will need to take the calipers off as you can't reach all the parts otherwise. Dries to a hard, shiny finish.

Probably good stuff delivered in an appaling state the tin was open so paint leaked out and the box was wrapped in cling film to stop the paint getting on the delivery drivers seats