Philips Ultinon Access LED car headlight bulb (H4/H19), ultra-compact direct-fit, 80%, 6000K, set of 2

Awesome LED for upgrading as safe on wiring as the wattage is 20W each bulb, which is under the capacity of 60/55W of halogen. The manual guides how to position the bulb so do check it before installing it as it makes sure that the light does not blinds the oncoming traffic and gives the most output from your headlight reflectors. The other options are not positioned properly like your old halogen for which the light body is made for and this Philips LED is the most accurate positioning in comparison of other brands.

Its a very good quality automotive OEM grade LED light . Pros : * 3500kelvin colour temperature is exactly like Halogen light output. * 25-30% brighter than standard 35w philips halogen filament lamps that comes stock in few cars. * The wattage is 20W per LED. So its easy on car wiring and fuse. * Compact size , so fitment is easy and direct and dont need much space . The cooling fan is very small to be noticed. Cons : * Its Not CAN compatible.. Meaning the car may throw fog lamp warnings on your dashboard due to less current usage. If you use VW/Skoda cars these warnings can be disable with help of obd tools. * It is not for someone who want high bright light output and white colour. I am using it in VW Taigun Topline variant . Satisfied with the output spread of light.

Since last 3-4 years, I was searching for a 4200K fan-less LED headlight. So, that I can put dust cover without altering it and keep my headlamp free from dust & water. I don't like cool-white due to poor visibility in rainy season. I was dreaming when would Philips or Osram make a fan-less Warm-White LED. I could find fan-less led as well as warm-white LED, but not combination of both. Few weeks back, I decided to go for OSRAM 4200K LED, just added to cart. Later, I saw the Instagram post about PHILIPS 3500K LED and purchased it. I am thankful to Philips for fulfilling my dream. Even it size is similar to halogen bulb, it comes with a smaller cooling fan and copper cooling tube. Pros: -Since fan is too small, you need not have to cut the dust cap for Maruthi vehicles. -As others said it lights brighter than standard halogen bulb. -Warm white 3500K really help in poor whether condition compare to 6500K. -It just 20W + 20W compare to 65W + 65W halogen. -Even it size is similar to halogen bulb, it comes with a tiny cooling fan and copper cooling tube. Cons: -Yes, its over priced. It would be better if its under 3K Rupees. -Not sure about durability as Philips claims 1500hrs lifespan. -Not recommended for those who want high brightness. Those who want, same model with 65K(cool white) is available. -Light appearance would be better, if it has 4200K instead of 3500K color. But I know that it would compromise the visibility in poor whether condition. Recommendation: If your dust cap is too old or melted, it's better to use a new one or clean dust cap before you install it. You may apply Vaseline on the dust cap hole to insert the cap smoothly.

Completely Waste of Money.

Better than normal light throw

Excellent bulbs with very bright and white lights, illuminating the path very clearly (I am using them on my Kawasaki ZX10R) and very straightforward and easy fitment without any modification, saves battery as well.

This is perhaps the only FANLESS ACTUALLY WARM yellow 3500K Without a connector box 1:1 size Exact fit Led bulb available. It fitted my S cross reflector headlight very well. Since it is a direct fit with no connector box just like a halogen, there is no change required for the dust cap. It fits perfectly. Remember to align the led at 3-9’o clock position as shown in the pic. The photos show the throw of the halogen bulb and then the led. Notice the large hotspot of the beam pattern. No scattering. The throw is better than the halogen. Though the brightness is a bit less compared to other LED s but then we are using it in a reflector based set up. The halogen like colour with minimal scattering and glare alongside focussed throw just like a halogen is just brilliant. No issues with packing and closing of dust cap and due to colour no problem regarding challan. I will rate it as an excellent buy. The pic with working led inside the headlight was a bit tricky to catch but seeing the led in action just shows the amount of engineering and thought that has gone into the making of this product.

Philips WeatherVision LED car headlight bulb is installed in a 2024 Wagon R that originally used a 12V 60/55W H4 halogen headlight bulb. 3500K LED bulb is easy to install, consumes less power, provides better road visibility than stock halogens, and produces a less harsh high beam The bulb offers great value, but its high price of Rs. 5000 is a significant drawback, which is why it received a 4-star rating.

This matches the dimensions of the old halogen H4 perfectly. Process was simple. Just take out the old halogen bulb and put the new LED in the same spot. Nothing extra. The brightness feels almost the same as the 60/55W Halogen, but the cooler colour temperature makes it feel brighter. I was replacing to LED for longevity and less power consumption anyway. The light spread pattern seems more or less the same. I will see how long the LED last.

good product, working fine.

Received on 28th of march, installed on the 29th of march. It is now 15th of may and one of the globes has blown. Very disappointing to say the least

Nice and bright, considerably more than halogen globes Throws correct light pattern

Excellent product, completely transformed the lighting in my 4wd Rodeo made the old Halogen lamps look like candles by comparison. Also very good service and they were about $40 cheaper than the local auto shop for exactly the same product and they were on special at that price, I couldn't be happier.