SSL Satellites Zone1 Dish Kit for SKY/Freesat/Astra/Polesat/Hotbird/Full HD, Latest MK4 Dish with Quad LNB, 20M RG6 White Cable, Signal Finder Satellite TV Finder, Brackets, Bolts, F Connectors

Bought this as we live in a very poor tv reception area, and down in a valley. TV ariel engineer advised that a new tv ariel could be fitted at a cost of £120, but it wouldn't really make any difference to how many channels we receive (we only got around 20 channels on Freeview (and 10 of them were +1 channels!). He recommended a satellite dish (same price as ariel fited) but I'd need to buy a FreeSat box (around £50 to £60). We bought one and then I thought I'd check just how much a new dish cost. Was amazed to see how low a price this full kit was (we went for 30M cable option). Arrived quick, and installation was pretty straight forward once you got the dish/bracket assembled. Check out where your neighbours dishes are pointing as a rule of thumb. Make sure bracket is installed to the wall perfectly level as this is important. Once installed, set up using the included signal meter was easy. Once tuned we got 187 channels, and all have perfect picture etc (including HD channels which look super sharp now). So chuffed with this as never realised how easy it is to install and set up the dish. This kit looks to be well made, and has everything you need to install, just need a drill (preferably with hammer action), a small centre punch to mark the holes and give the drill a good starting point. Also a spirit level to make sure the bracket is bang on level/straight. Really happy with this kit and highly recommend it.

It was a bit hard to understand at first, but once we put our minds to it, after a little bit of time and a few rude words, everything just came together, and the picture quality in HD is absolutely amazing. We bought this because the old one was full of rust and very weak in places, but the best part of all of this is the price. You see, our old dish they installed back 20 years ago cost us £*** pounds, so let's just say this: it is 100% cheaper to do it yourself. I am happy to say that this company delivered within 24 hours; it arrived at home. So do I recommend this company? 100% yes, I do. Tony.

Just finished installing this dish. Wasn’t too bad. Could have done with a couple of extra nuts but you can always buy a couple and make the dish more rigid in strong winds. Not bad though. Used youtube to find how to assemble. Loads of videos of exact same dish so no problems. These are the same dishes that sky use for new customers because the sky logo is actually imprinted on the arm bracket, also it is the itentical dish and lnb that was installed on my neighbours house when they had sky installed. I didn’t bother with the sat finder because although it finds satellites it doesn’t tell you which one and there are loads of them so you could be there for a while. I downloaded a great free app called satellite finder pro. Once installed on your phone it gives you a selection of satellites to chose from. I selected one of the astra satellites there are about 3 or 4 to chose from the one I selected was astra 2A/B/C/D/F/G (east 28.2 ) this is the one with all the usual uk channels. Once you selected it shows a live compass of where in the sky your satellite is, just put your phone against the lnb and the screen tells you to move the dish exactly where the satellite is. When the dish finds the satellite your phone gives a loud beep. Tighten the nuts on the dish and tune your tv in. really easy and saves loads of time trying to find the right position in the sky. Great little app. You need a 10mm masonry bit for the wall mounting bracket and a 13mm spanner for the wall bracket screws. You also need a 10mm spanner for the nuts on the arm. The 4 black screws that attach the dish to the arm are a bit tough to screw in at first. What I did was started the screw holes without the dish first just so you have a good grip. Just tighten with a Philips screwdriver. The lnb has a pulldown plastic cap on the end so when it’s all set up just pull the cap and it covers the connectors as protection from the elements, nice feature. Lots of cable clips too although a few more cable ties would have been nice, only came with 2, used them to secure the excess cable to the dish arm to make it nice and neat. All in all a decent dish with some minor improvements needed but for £38 and a couple of hours work I’ve saved myself a few quid. I was quoted £120 by an installer. Hope this helps.

Kit includes everything you'll need. Installed successfully with assistance of a satallite alignment app from Android Play store on my phone. If you are fitting dish to a mast or pole you'll also need this clamp/ V bolt from amazon https://amzn.eu/d/5LvIhHe