ASelected Deburring Tool Set with 15 Pcs 360 Degree Rotary Deburr Blades, Metal Deburring Tool Kit Burr Remover Tool for Plastic, Steel, Aluminum, Copper, Iron, Brass and Metal Work

I've just brought this as a test to see if it can help deburr 3d printed models.Some larger 3d models need a brim to hold them onto the heated bed, PETG is bad at slighly warping and no matter what I did, some parts would life by 0.2mm or so.So I printed a brim and and it nicely holds down the model. However now I have to remove the brim. Got a scalpel and that works more or less, but its dead easy to slice into the model or your fingers. Difficult to keep it clean along the edge.So I brought this to try and its wonderful and slices a thin brim off with little effort, doesn't destroy the model at all, is dead easy to use. This is a metal handle version and I suspect it will outlive me.I have no idea how it works on other things such as metal pipes and don't care. I do care about 3d models and this is brilliant to clean them up.The only thing I would say is make sure you have a sharp blade in the tool but as it came with 14 blades that shouldn;t be an issue. No idea why some are black and some are shiny.

Used this for some time now, great bit of kit, it’s razor sharp and great for deburing pipes or holes after cutting or drilling.A must for the DIY or professional, I use this so much, don’t know how I ever managed without one.

At time of purchase this offered the largest number of replacement blades and a metal handle for the lowest price on Amazon. I've found it indispensable for cleaning brims and supports off 3d prints and it's infinitely safer than a knife and leaves a cleaner finish.I've cleaned up maybe 100+ prints with it and the blade shows no sign of wearing out.If you're into 3d printing an indispensable tool.Fetching anodized blue finish was quite badly scuffed, but that's OK by me as long as it does it''s job.

Bought this for use in the workshop, so much easier to remove burrs with the tool rather than using a needle file. Gives a nice, consistent cut. Only tried it on some gunmetal so far and it works well. All the added tips are handy for different grades of material and hole size, can see it lasting a long time before having to replace any of them.

We use this tool on site almost every time we cut with a hole saw. It's a nice way to clean sharp edges. It's worth the money for what it does. The handle could have been more practical with storing blades inside but can't give it any faults.

These are impressive on Ali for the price I paid. Have a lot more expensive make I usually use and brought this for the blades and I'm very impressed

⭐ This is a comprehensive set of hole deburring tools. The kit consists of a handle with a locking barrel to hold a blade, plus a plastic wallet containing blades in different sizes. All the blades have a safety ball end moulded into the tip.⭐ The blades insert easily into the handle and lock into place. The variety of blades is good, and I needed these to deburr the inside of some guitar string peg holes that had splinters inside the guitar body. The sound hole was too small, so I had no choice but to use a tool like this.⭐ This is a tricky tool to get used to using, as with a blade installed, the blade rotates freely, so it is tricky to get the purchase required to de-burr the hole that the tool is inserted into. It was effective, but I have to ensure that I didn’t remove any extra wood from the hole, as the intent was not to chamfer the back face of the holes.⭐ In the end, I was successful, and this is one of those tools that are essential for a really specialised job, so I would recommend them. ✔️

This deburring tool is great for cleaning up my 3D prints. The range of bits included are useful too. I really can't argue with the price on this. It's definitely better than the plastic handled ones out there.