iAnder[3-PACK Galaxy S9 Screen Protector Glass [Easy Installation Tray], 3D Curved [Tempered Glass] Screen Protector for Galaxy S9 [Case Friendly]

Boufht these for my phone and my gf phone. Super easy to install with no bubbles on screen. Love how it feels and easy to wipe clean when needed

Just installed this on my Samsung s9 plus a few days ago....install went perfect with the included plastic guide, easiest install of any i have ever had, and my otterbox communter case fits perfect with it on. Only issue i had with it was the touch screen wasnt as responsive, especially on the edges. I was almost ready to take it off my phone, but lucky for me I was reading a forum on another glass screen protector with the same issues and someone mentioned there is a setting to adjust screen sensitivity. I went to samsung settings, searched touch sensitivity and turned on touch sensitivity and BAM...touch screen works just like it did before I put the screen saver on!!!My phone was brand new, but i still used the included cleaner and wipe to make sure it was 100% clean before i installed the screen protector. No bubbles, completely clear install. I bought two of these since I am sure i will drop my phone at some point and crack or scratch the screen protector. WIll update if I have any issues.UPDATE 11/17/18 As i predicted, i would drop my phone...dropped it a couple times....screen protector bit the dust, but phone screen is perfect. Just installed my 2nd one and install went as good as the first. I dont understand all the negative reviews....tempered glass is not shatter proof and they will sometimes crack with temp changes. these are cheap insurance to keep your phone glass from getting scratched. Now these are $1 cheaper than when i first bought.

The plastic case containing the glass was thick and durable allowing it to arrive undamaged, unlike other glass screen protectors I have purchased. It reminded me of the type of packaging Apple uses for their products, very impressive. When actually applying the screen protector, things didn’t go quite so well. First, the alcohol cleaning pad was dried up causing it to do nothing but leave lint dust on the screen. No big deal, I happen to have lens cleaning pads on hand which worked quite well. The next step was to remove the dust with the provided sticker. Instead, as others have mentioned, parts of the sticker stuck to the screen requiring me to reuse the lens cleaning pad to clean the sticky glue from the sticker off the phone screen. After cleaning it, I was able to use the provided lint free cloth to rush off remaining dust particles. After that, the screen protector went on perfectly, fits great and I am really happy with the final install.I have installed three of these from three different manufacturers on three different phones. They are all basically the same process. Here are a few tips I learned along the way.1. Practice applying the glass for a while before taking off the plastic film on the back of the screen protector. Make sure you get a feel of which side is on the bottom and how close to the side it needs to be to center it. If you want, you can place it on the glass centered and a couple pieces of tape to the screen protector and the phone on one side so you can flip the screen protector over and back again to have it re-centered to the glass. I tried this once with good results and twice by just aligning it by sight. However you choose to do it, the trick is to be able to apply it quickly after removing duct specs and protective film, before more dust has a chance to settle back onto the phone screen. Any duct on the phone screen will stand out when you install the screen protector. Tip – apply the screen protector in the bathroom after running hot water in the shower for a couple minutes. The steam will weigh down and remove most dust particles from the air.2. Get the phone really clean and free of smears. Any good lens cleaner can work instead of the alcohol wipe if needed.3. Use the lint cloth, or a sticker less sticky than the one that came with the kit. Don’t use the provided sticker. It may leave a sticky mess on your phone screen like it did for me. Stickers that came with other brands of screen protectors worked great.4. When you are sure there is no specs of dust on the phone, quickly peel the back from the screen protector and carefully but quickly position it on the phone. It can be moved little unless you push down on the screen protector. Once you push down at all on the screen protector, it will be too late to move it.5. Once it is aligned, simply press gently in the center of the screen protector. You will see it adhere to the glass where you push and the area that is adhered will spread out until the entire screen protector is adhered to the glass and should be completely free of any bubbles and ready to use. No dry time is needed. You shouldn’t need to use the included squeegee that came with the kit to work out air bubbles.

While looking for a replacement glass screen protector for my Samsung Galaxy S8, I viewed so many products and read SO MANY reviews. Doing research to find a sufficient replacement started to become exhausting!I had purchased a glass screen protector from my carrier when I bought my phone, and I paid way too much for it. I was told it had a lifetime "free replacement" warranty, so I paid $50 for the screen protector thinking this would be a good deal. Once it broke, I went online to get my free replacement, only to find out I had to pay $19.95 to ship a new one. So really, not free at all. So this is when I found the iAnder 3D Curve screen protector.I read a lot of the reviews and some people did not have favorable things to say about this screen protector, but then many did. After looking at so many different brands and reading bad review, after bad review, I took a chance and purchased this one and I do not regret it.It was so easy to install - I didn't have to use the stickers or watch a video to do it. I just put the plastic guide on, peeled the backing off the screen and stuck it on. Voila! It went on perfectly. No bubbles, no cracks, no issues! I have a case on my phone (which I removed before installing the screen protector) and the protector fits perfectly without any interference with the case. I also have found no issues with the touch screen. It works just as it did before. I should never have bought the $50 one from my carrier (lesson learned!) when I would have gotten the exact same quality from this product. I am so glad I purchased this brand and will definitely buy more when needed.

No real need to smooth it out as it adhered quickly and cleanly without any bubbling. I forgot how good it feels to have a new screen protector. :)

Its a good thing there are 3 in the package as one was ruined immediately upon peeling off the protective sticker. There was an existing nick in the glass/plastic that couldn't be remedied.The second try produced a screen with a very minor flaw which isn't showing up on the phone screen.The clarity is great, and just like new.Touch sensitivity is fine also.

Je viens d'installer l'écran protecteur sur le téléphone de mon fils. J'ai suivi la vidéo pour être sûre, cet écran étant recourbé des côtés latéraux, en fonction du Galaxy S8 dont les côtés sont arrondis. Ça s'est très bien passé, je n'ai pas eu de mal à l'installer. Je me demande même si ce n'est pas plus facile que les protecteurs classiques, car il y a un moule qui sert de guide pour apposer l'écran qui se case simplement dans l'espace; je ne vois pas comment on pourrait se tromper. Toujours est-il que pour l'instant, il a bien adhéré. Nous verrons bien pour la durabilité avec le temps et s'il restera en place.

adhesive is bad , at the curved side of the screen adhesive not working, curved edge not covered ,Not recommended

Bought for an older phone that has an otter box. Fit perfectly and the click on guide made installation a breeze. No bubbles or defects.