Ourbest H5001 Led Lights Par46 LED Light for Unity Spotlight, 5.75" 5-3/4" Round Led Pods for Truck Offroad Led Work Light Replacement Sealed Beam Projector 36W Chrome(1 Pcs)

I installed this LED light on a 6" Unity S04 spotlight in Crown Victoria Police Interceptor, when I bought the car, the spotlight was missing the lightbulb along with all the hardware that comes inside the head, like the retainer clips and pads that help keep the lightbulb in place.If you have all that hardware, good for you, if like me you didn't get it with the spotlight, then you have to figure out how to keep the LED light from rattling around in the head. If fits almost perfectly, and it is just the right depth so you can keep the connector, if you want to. I did cut the connector, it is a little bulky anyway, then splice the wires with the right connectors and voila! the spotlight looks amazing.To fix the rattling, I initially tried some foam insulation I took from the A/C system of an old Trailblazer, but quickly figured that it might not be such a good idea to put all that foam against a hot lightbulb all the time (when exposed all day to the Florida sun). Instead, I ended up using a piece of automotive weatherstrip I had laying around from another project (https://www.amazon.com/dp/B07TC4B9C3), it is approx 2mm thick, so when I wrapped it around the edge of the LED light it made it fit perfectly, nice and tight, no rattling, no movement, just perfect.Before I decided to buy this LED light, I considered buying the replacement (incandescent, not LED) lightbulb and hardware from Unity for about the same price (here: https://www.amazon.com/dp/B00EC1N76C) which should make for a trouble free installation, but the LED light looks way better, uses only 36 watts (versus 100W for the unity lamp), and it's supposed to last much longer and not oxidate as much.

Very good replacement. Very bright. Easy to wire into existing wire harness. 2013 Ford police explorer

I bought these replacement LED spot lights for my 2011 Crown Victoria Police interceptor. I’ve seen a lot of people ask if these lights will fit. And the answer is yes. They fit perfectly. In terms of wiring that’s basically on the buyer to decide what to do. I personally just spliced the wired and connected them to the internal wires onto the spot light frame. I had no problems with it and they work perfectly. It takes I’d say about five minutes to install these new LEDs. And it’s so worth it for the price. These are super bright lights and way brighter than the normal unity halogen bulbs. No flickering what so ever. These lights make your police interceptor look way more ledgit. Hope that helped y’all!

I upgraded a 1962 Ford 851D tractor I occasionally used for odd jobs on the horse ranch. We had an issue in the back pasture and I drove the old tractor back there to use for lighting. Very disappointing as the old halogen bulbs were so dim.I installed these in the bug eye headlamps and turned them on. Instant daylight. They installed easily in the old fixture. I did add a pigtail to the source wires to utilize if ever need to replace the lights again.The rear work light fixtures uses the same PAR46 bulb, so I replaced them too. One of the fixtures needed a slight mod as these lights have keys to keep them in place. Quick use of a tin snip and problem solved.I tried to find inexpensive LEDs with screw terminals like the old bulbs, but adding the pigtail was cheap and easy. Not all LEDs in this size are as bright as these. Highly recommend these replacement LED bulbs.

I purchased this to replace the burnt out spotlight in my police Tahoe. It was a direct fit to the standard halogen light that was already mounted. All that is required connecting the wires. It is very bright and performs better than expected. I would recommend that anyone who is in law enforcement replace their standard spotlight with this.

Definitely good for offroad use, or law enforcement applications. This specific LED lamp comes with a connect already pre-wired, so if you cannot use the connection, you will need to cut it off and solder the wires yourself.The plug is convenient if you can use it and if not it doesn't entirely stand in the way of using the light, you just will not likely be able to return it if you make changes to it so make sure you verify that all other details will work.Overall the light is very bright and is a good replacement.

I was looking for something to put in my vintage Unity S6 spotlight to replace the halogen that is in there. I had looked at a lot of lights on the internet and within Amazon and came across this one. It fit perfectly inside the housing, and installation was pretty easy. As the other reviewers mentioned, the wires weren't plug-n-play but I just had to cut off the ends and splice them together. The hardest part was figuring out how to remove the original light from the housing.I was looking for something to use while driving my boat in the evening and I figured this would be bright enough so that I could see any buoys, boats, etc in the water. Well, the moment I turned it on I was overwhelmed by how bright it was. It was actually so bright that the light would shine across to the other side of the harbor! It way surpassed my expectations on the brightness. Actually, I had it on to see how it worked and it light up a boat that was approaching, and that boat turned its own spot light back onto me - it turns out it was the Sheriff's boat who put their spot back onto us LOL.So if you are looking for a really really really bright light and have a Unity Spot light, then this thing is for you!

It's brighter than the single sealed beam that was in my spotlight before. I had to rewire the spotlight to get the right connectors for the new lamp which was not a problem.

J’adore, éclair vraiment super bien!

Light was well packaged for travel and is exactly as described. Certainly appears to be brighter and more tightly focused than the incandescent light it replaces.