iJDMTOY 90mm-Universal Front Road Illuminating Light Housing Rear End Rubber Seal Caps Compatible With Automotive Installing/Upgrade Light Bulbs

I upgraded my 2015 Kia Soul Headlights bulbs to LED high-speed lamps. The size was bigger and will not fit with regular caps. I tried other brands but will not lock. This one worked like a glove. Very happy with it. Installs easy and are very economical.

It didn't install easy. It kept slipping off... even though it was the correct size. I found a Hyundai OEM parts distributor that sold OEM for $1.50. The only drawback was shipping was $11. So, I bought 2. My total was $15. Perfect fit. Now I'm stuck with this aftermarket product ☹️

Used these when I installed LED headlights in a GMC Terrain. The stock cover wouldn't fit due to the led bulb protruding further, these fit snuggly and sealed the housings preventing water intrusion

These were a problem to install. They do not quite fit the opening. I ended up soaking them in hot water to soften them up and then got them in place and hit them with cold water to set them. They have not fallen out yet, but I am not confident they will stay in place for long.

I accidentally bought 2 sets of the Universal Caps (thanks to the Amazon Android app goofing up on me), but it's OK. I needed these for my HID headlight kit, but since I ended up getting two sets, I tried the second set on my fog lights, but they were too big for them. Again, it's OK because I'll soon be getting LED high beams, so I'll use these for them to replace the OEM dust caps. My only real complaint about these is the lack of instructions on how to use them. I tried two setups with my HIDs. First, I simply strung the wires through the dust cap's hole and wedged the dust cap over the projector. This work... but after it rained, I noticed that water was in the rubber dust cap. So the second thing I tried was sticking the bulb itself through the hole and removing the bulb's rubber O-ring. Then, I plugged the bulb in and once again wedged the dust cap over the projector. In the end, this sealed off the hole in the dust cap, and made the entire setup look like someone pushed a suction cup onto the back of my headlight housing. This setup seems to work great though. Nothing can get past the dust cap! No rain, dirt, dust, or anything. I just don't know if this is correct or even safe.

These are actually pretty cool. I recently installed some HID lights on my car and noticed that the new bulbs stick out past my covers so I had to sorta halfway close em. With the weather starting to get cooler I needed them sealed so no moisture gets inside. I saw these at a great price. They are a soft rubber like some intake couplers. That should give ya a better idea of what to expect but they are actually pretty good at doing what they do. I ordered the 95mm ones which fit the 70 series p80 volvos. So the first gen c70 and the v70 and s70. The rubber is easy to flex a little to get it to fit if the size is a little too small. I used some zipties to tighten them down good but I will be switching to some ordinary worm clamps so its easier to remove and put back on. They seem to be working pretty good and they give you about an extra 2 inches of clearance for longer HID lights. I didn't need that much room but it's cool cuz they allowed me to seal my lights back up with the new HID bulbs I put in there. Overall I am satisfied and for the price, great deal.

Not the right part to my vehicle

I was worried that these would be too big because it says 105mm but my low beam headlight cover on my Kia Optima 2013 was about 98-100mm when I measured it. It was not a problem fitting so if you have a 100mm lid cover, the 105mm should work fine. The seal cap that I received was not hard plastic as some other reviewer mentioned. All of it is soft rubber with the main ring being of a thicker rubber material to form the seal and the dome being very thin rubber. I think the dome part of the product is actually too thin as it doesn't maintain a perfect dome shape but in any case it will not affect functionality as it will still block dust and water from getting into the headlight housing. The fit is tight enough that I didn't need a strap around to keep the cover in place but I'll update this review if I have problems with water getting into the housing when there is high humidity. But so far so good!

Did perfect job!

Perfect fit, good quality product

Did not fit my 2019 f 150

Excelente y muy buena calidad

I liked that the fit was very tight to keep water and dust out of my new LED lights. The oem covers fell apart when I tried to pull them off to change a blown headlight. They were only 5 years old. Hope they will last longer. 🙏