Guyker Guitar Locking Tuners (6 for Right) - 1:18 Lock String Tuning Key Pegs Machine Head Replacement for ST TL SG LP Style Electric, Folk or Acoustic Guitars - Antique Bronze

Ok, so if you're tuner hunting like I was you really only want to know the following things... So here we go! 1. They look great. They're excellently machined with a rich gold finish and they look and feel premium (just as nice as the official Fender tuners on my Strat... At half the price). 2. They work! So easy to change it strings, stable tuning and they don't drift. 3. Fit requires a small, easy adjustment for My Bonanassa Custom ... So probably most LPs. They're a shade too narrow on the collars (but this allows a greater variety of instruments to use them... Better than too wide!). All you need to do is get some some tape (I used scotch tape). Cut around 6cm of tape and slice it down the middle, length ways This makes a perfect width to tightly wrap around the collars, creating a shim (expanding the width). They will now seat in the headstock snuggly. With that done, line the tuners up parallel (just eyeball it). 4. The screws! As you can see the fixings are 45° not right under the tuner. For me, this was just fine as my original screws were spinning from re-tightening over the last 20 years. 5. You don't need a drill to fit! Before you take a drill to your axe... Read the following! Firstly, line them up. Next, you'll need a fine center punch tool and a hammer (the ones you tap into wood to start a drill hole). Line the centre punch up with the screw hole and GENTLY tap the punch into the headstock. ROTATE it as you gently remove it (don't wiggle it out ... You'll risk splitting the wood). Pop the screw in the starter hole and slowly and carefully screw it in. If it doesn't want to go in... Use the center punch again gently. Using this method I achieved a perfect fit for all screws in less than 2 minutes... Without using a drill. They now look amazing. I'll not fill in the original screw holes in case I ever want to reinstall my Grovers (unlikely as, unexpectedly, these are better). The guitar now feels stunning to play. String bends don't drift the G string and it's weirdly quicker to tune... And rock solid tuning stability once in. Many negative reviews for off-brand guitar parts are a result of a lack of ability to make simple adjustments. There is always size variance between models and brands of guitar...a bit of common sense, some basic tools and sticky tape can save you a fortune. My advice would be to buy these and follow these simple instructions ... Rather than spanking nearly £200 on Grovers. I hope this answered the questions I needed to know when I was browsing! Rock on!

Fantastic tuners. I use them on every guitar I upgrade because the quality is always spot on, they never have sharp locking pins so never broken a string (unlike some other brands). Consistent feel and they look great. I’ve used both chrome and black and the quality and fit is always first rate. They definitely bring stability to any guitar they are put on.

Cant fault.. fit well, nice and tight when tuning no unwanted movement, look great

Look good and are decent quality. Knocked a star off because one tuner was stiff took a bit of use to loosen up.

These arrived very promptly. I had an issue with one of the tuners, the collar wouldn’t tighten down far enough against the headstock. After contacting Guyker they sent a new one free of charge; that’s now fitted and working fine. Great customer service! I would say they’re not quite as good as really high quality (and expensive) locking tuners, but they do a really good job, look great and hold tune well. If they were twice the price, I don’t think anyone could tell, they’re well made and finished. The only one very small issue I had was that on a very light string, I tightened it a bit too much and broke the surplus string off. This wasn’t an issue since the remainder of the string held tight in the tuner; not sure if more expensive tuners would do the same when over tightened. (I’ve since learned that you shouldn’t and don’t need to tighten these down hard.) If you can, and want to spend more for Graphtech or Fender locking tuners, you potentially should, but these make an excellent alternative that don’t disappoint. Good value for money, hence five stars.

As always Guyker are quality for their price. This is the 3rd guitar that I ha e put Guyker tuners on and I have had no issues. Feel good and looks great. Very easy to fit to my Jet JS-400.

These are a very good fit not hard to exchange and so smooth to tune in and def made a difference to my HB 335 also bought 2nd set for Leo Jaymz SG and again big difference to the sound pure quality and won’t hesitate to use again in future

These heads look great on my Yamaha SG-400, i didn't want to re-drill the small screw holes on the back so i rotated the heads to suit the original holes (the original heads were perpendicular) but I think it looks pretty cool with the heads angled. The heads have a good weight to them and are good quality. I haven't strung up yet but doubt there will be any issues. Very happy.

Excelente opción para un upgrade

Me gustaron aunque para modelos GRX IBANEZ queda algo pequeño hay que calar al tamaño y no cualquiera puede hacerlo por favor acercarse a un laudero de confianza para que haga este trabajo porque quedaría milimétrica mente mal y eso podría afectar la entonación y octavacion del producto final, aún así es un excelente producto muy profesional y de excelente material, si pueden agreguen un poco de grasa de litio en el engranaje para evitar corrupción por el óxido y muchas gracias por el tiempo de entrega súper rápido 🙇‍♂️ saludos.

Einfach genial! Super Optik! Und hält die Stimmung sogar nach Transport! Perfekt nur zu empfehlen

Bonne qualité, tête de mécaniques plus petites que ce qu'on voit habituellement (ce qui rend très bien sur une tête de manche PRS.

These have a good solid feel and appear to be well made. I had no issues setting these up or mechanical problems with them that I had seen in other reviews. With that being said, I was not a fan of the 2 little nubs on the bottom that assist in keeping them from rotating along with the screw. My guitar, a Gretsch Jet Vintage Select and Electromatic Hollow Body do not have the indents for that. I drilled a small indent in the finish to accommodate the nubs to keep the varnish from cracking while tightening. As far as tuning, an 18:1 ration would be better served but with a delicate touch while tuning they did just fine. These are holding quite nicely and keeping the Bigsby tremolo in check. I will be adding these to my Jackson and Les Paul that have tremolos as well.