Thermal Grizzly Thermopad Minus Pad 8- Silicone, self-adhesive, thermally conductive thermal pad. It conducts heat and cools the heating elements of the computer or console. (120 × 20 × 3 mm)

Works well, seemed to help keep noise/temps down on the ps4. One packet has done 3 ps4s so far (2 pro, 1 base) with some left over (unknown if it can do a 4th).Only issue I have is the harder plastic side is difficult to get off the pad when applying it without accidentally destroying the pad - most likely a skill issue on my part in applying it.

There's multiple videos and articles that will show how these thermal pads are nothing special. Other pads will do a better job when it comes to lowering temperatures/fan noise.Two examples are: Gelid Solutions GP-Ultimate and NAB Cooling NB Supermax. Although the catch is that these two pads are harder to apply. They're brittle so it's easy to break them apart and almost impossible to reuse them because of this. The Grizzly pads are far more flexible and can be reused, but their cooling performance is considerably worse.If you just want to lower temperatures or fan noise and don't care about reusability, get either of the Gelid or NAB pads instead. Both perform and feel exactly the same so just get whichever one is cheaper or available. But be very careful when handling them.

Not enough in the pack and no enough performance plfor the price.

Ps4 pro's fan sounded like a jet. This helped loads. Only now I need to warm the flat up by other means lol. Good product. Would recommend.

It’s okay but a bit to thick to use with laptop

I came here after watching a youtube video on how to make my PS4 Pro run quietly. I had stripped my console right back a few times in the past to remove dust which collects in the heat sink, but the jet engine kept coming back when graphically demanding games were being played, so I figured it was time to do something about it! This product is excellent when bought together with the Thermal Grizzly compound. What you will notice when replacing the thermal pads is, the originals are tiny and not adequate. The first set you replace on the memory chips are small, so be careful to take your time getting them cut just right. The second set of pads you replace under that aluminium cover are going to be much larger than the originals, these are much easier to fit. I gave it a good test today and its silent! This product really is the muts nuts. One thing I would suggest BEFORE you fit these is to strip your console right back and clean that fan and heatsink first. Take your time and have a black marker to help you remember where the black screws go.If you already know what your doing then just buy this stuff! You cant even compare it to the original junk thats on there. You even get two strips in the pack!

Used on my Nvidia a2000 rtx card. Installation was no issue atall. All appears to be ok. Used on a youtube reccomentation.

I think the pads will do a better job , but being connected with gpu on same heatsink it's not ideal. The memory chips will get more heat from gpu! Pricey for what you getting!