CAHAYA Microphone Stand Heavy-Duty Super Resistent Tripod Boom Universal Mic Stand with 2 Mic Clips for Most Mics Height Adjustable Mic Stand for Singing Wedding Performance CY0330

perfect to mic a snare or guitar cab. rugged. solid. thick shaft. height adjustable poles.

For the price point, I expected this to be lighter weight and a little flimsy. Not so! VERY happily surprised and the weight and quality of all the parts. This thing is built to last. Like that they included different mic clips. The knobs/tighteners all hold their position rock-solid after tightening. Very happy with this mic stand and I've owned quite a few through the years -- home recording and in & out of bands. This is solid gear.

Why did you pick this product vs others?: Needed a budget, simple stand for occasional use. I will keep it. Here's why: It it light, thin tubing and a little fragile? Yes Would it hold up to gig work and travel? No Is it heavy and stable? No Is it too tall for a short singer? Yes --Then why keep it? Great for occasional use Conclusion: This is light, cheap mic stand that does the job and is worth getting if this is what you need. I may get a second one.

This mic stand is a great small form factor mic stand. It has a nice telescoping boom making it very adjustable. When I play live acoustic shows the boom of a standard stand would get knocked into by partiers, I can tailor the length of the boom for a good compromise of balance and obstacle reduction. I liked the stand enough to buy 2, but the inner boom arm is pretty thin, so it's not the kind of stand I expect you can beat up too much, I am going to rave about the knobs, they feel nice, tighten well without too much pressure and feel very solid.

I’ll start by saying that this mic stand is not heavy duty, regardless of what the seller description says. For the price, it’s fine if your mic isn’t too heavy. Mine was missing one of the clips and adapters. I got the chip clip one but not the standard one. The vertical pole isn’t one piece, it’s a couple short poles that get screwed together. These are potential weak points or at best, points that might need to be periodically tightened back up. It will do fine for my home studio but there is no way that I’d take it out for a gig. It’s worth the $25 that these cost but I wouldn’t pay more than that for them.

I'm sing and play guitar (decades) and have had many mic stands over the years, I may have had this model years ago sans the segmented riser, with just a straight riser-pole as opposed to this one that comes in 3 sections. I don't prefer the 3 segment idea, but they designed it quite well and I now see no issues, this feature allows them to ship in a smaller package, and their may be a few users that will benefit from being able to collapse the stand for whatever reason, plus the segments allow the stand to be much shorter than standard for various applications. I may have read a review or two before purchasing this stand, regarding instability, and durability, but I don't see any issues there, surely their are more stout mic stands but I'm not in the kind of environment to have that be a concern. As a guitar player, a 'boom' stand like this so convenient, as I don't have to deal with hitting the riser with guitar as I'm playing and singing simultaneously. A BIG PLUS, really big, is that the horizontalish' 'boom' or mic holder assembly is length-adjustable, this feature is nothing short of brilliant, as in the past, I have literally cut off and shortened at least one of my boom segments as it was way too long and hazardous. I will buy this model again as needed. I forgot to mention that this stand also looks pretty amazing.

It falls apart very quickly so then it cannot keep the microphone in place. So then the microphone slides down away from facing up to my mouth. it's very cheaply made. it will just fall over on itself all the time. When you tighten the adjusters to keep the arm at an angle the arm will start drooping down. dont buy this.

Surprisingly solid quality

Sembrerebbe ben fatto, adeguatamente sezionabile per il trasporto. Vediamo con il tempo e di buon uso quotidiano.

El producto aparenta ser de metal frágil o débil delgado en fotos de gente, y el tubo/mástil es de muy buena calidad, las únicas partes plásticas son los ajustes para apretar los tornillos, fuera de eso es metal bueno duro y endeble. A mí no se me suelta nada ni se me queda flojo como en algunas reseñas dicen. Creo que por ese precio está más que bien, cumple con su función y queda genial. Algo de queja o que por lo menos echo en falta es el ajuste de altura como tenía uno que tengo por casa, que a la hora de subir o baja es apretar y ya, este no, tiene para subir mucho más alto( punto a favor) pero el mástil principal es fijo, cosa que a ver, se puede ajustar muy bien y la verdad es que es una queja estupida y por decir algo pero tiene más altura que uno normal. 11 de 10, recomiendo 100% y tenia miedo la verdad

CAHAYA Mikrofonständer Das Mikrofonstativ kam heute amazonschnell an und wurde einer kurzen Prüfung unterzogen. Als Erstes fällt auf, dass die zentrale Stange dreigeteilt ist und mit Schraubverbindungen zusammengefügt werden muss. Das zuoberst montierbare Teil ist in der Länge / Höhe stufenlos einstellbar. Was einerseits etwas umständlich ist, andrerseits eine große Flexibilität bietet. So lässt sich das oberste Teil auch direkt in den Dreifuß einstecken. Das kann bei Abnahme z. B. eines Kontrabasses oder großen Trommel im Schlagzeug sehr hilfreich sein. Insgesamt lassen sich so drei verschiedene Höhen realisieren. An dem oben erwähnten höhenverstellbaren Stück kann man entweder direkt ein Mikrofon anbringen oder den Ausleger montieren. Dieser ist, das findet man nicht oft, in der Länge variabel. Das Mittelteil des Dreifußes ist aus Metall, was große Solidität verspricht. Außerdem erhöht es die Stabilität, wenn man ein Großmembran- oder Stereomikropaar am Ausleger anbringen will. Ein Tip am Rande: in leeren Kunststoffwannen von z.B. Eiscreme mit Fertigbeton Mastschellen eingießen. So bekommt man auch mit schweren Mikros am Ausleger sicheren Stand des Stativs. Was noch? Es sind drei recht einfache Mikrohalter dabei, falls die jemand braucht. Immerhin ist jedem Halter noch Adapter von 3/8“ auf 5/8“ eingeschraubt. Die verschwinden bekanntlich ganz gern, man kann also nie genug davon haben. Insgesamt macht der Cahya Mikrofonständer einen guten Endruck. Ob sich dieser Eindruck in der Praxis bestätigt, muss sich noch zeigen. Falls ja, wovon ich ausgehe, werde ich sicher meine Ausrüstung um ein oder zwei dieser Stative erweitern. Den Preis von knapp € 30.- ist das Ding auf jeden Fall wert.

La pedana è stabile le filettatura sono buone si montano e smontano tranquillamente

Semplice leggero(forse troppo) delicato, uno dei fissacavo (non indispensabile) si è spaccato subito ma nel contesto buon acquisto