Avantree Neetto Headphone Hanger Holder Wall Mount, Headset Hook Under Desk, Universal Adhesive Stand for Gaming Headphones, Earphones, Cables - HS907

I've been using the Neetto Headphone Hanger Holder Wall Mount for several months, and it has proven to be an excellent solution for keeping my headphones organized and easily accessible. Design and Build Quality: The hanger is made of high-quality materials, providing a sturdy and reliable support for my headphones. Its sleek and minimalist design complements my workspace without being obtrusive. Ease of Installation: Installing the hanger was straightforward, with all necessary hardware included. It securely attaches to the wall, ensuring that my headphones are safely stored. Space-Saving: By mounting my headphones on the wall, I've freed up valuable desk space, contributing to a more organized and clutter-free environment. Pros: Sturdy construction Easy installation Space-saving design Keeps headphones easily accessible Cons: None encountered so far Overall, the Neetto Headphone Hanger Holder Wall Mount has been a practical and reliable addition to my setup. I highly recommend it to anyone looking for an effective way to store their headphones.

Still holds up well

I’d been looking for a solution for keeping my headphones tidy for a while and then at Christmas, I received another pair, which means I needed somewhere that looked good to hang both pairs, I really liked the look of this multifunction hanger - price was decent too, but some reviews seemed to suggest the adhesive didn’t work very well, not my experience, I followed the instructions and placed the hanger on a clean surface (side of my draws) and pressed firmly. The instructions said not to use for 24hrs to allow the adhesive to set, but I decided to leave it for a few days and occasionally go back and keep pressing it firmly, and that is where I think the secret is. Don’t be tempted to use it too soon, leave it as long as possible, It stuck extremely firmly and 2 pairs of headphones have been hanging nicely ever since without any signs of moment and it looks smart!, I’d really recommend this based on my own experience, I’m not sure if the manufacturers have improved the adhesive or what, all I can say, is I’ve no problems with this, I’ve enclosed a photo Recommended 👍🏻

I've seen reviews stating that their 'HEADSETS' didn't hold on this hanger, but it's not meant to hold a VR Headset. It's a HEADPHONE hanger. The adhesive holds more than adequate for headphones which it's designed for. If you want to venture into using it for VR Headsets then it will have to be secure with screws - obviously not included since it's unnecessary for headphones. Good, solid built hanger which holds my HD650's nicely. I noticed than one review mentioned that the previous version was larger i.e it extended outwards more. This would have been a lot better to prevent the headphones making contact with the (wall / desk) surface. it seems like the company have taken a step back with regard to design innovation so with that in mind, it's losing a star. I pride myself in keeping my expensive cans in near perfect condition. Otherwise, recommended. Much better than the over-engineered screw clamp hangers.

Bought this in 2018. Over the past 7 years, this has held many gaming headsets in its service. It was strong, sturdy, and reliable, ensuring that no headset touched the floor. The time had come to say goodbye when I bought a new desk, and the weld-like self-adhesive wouldn't let go of the old desk. A bond that couldn't be broken I guess. 2018 - 2025: Avantree Neetto Headphone Hanger Holder Wall Mount, Headset Hook Under Desk, Universal Adhesive Stand for Gaming Headphones, Earphones, Cables - HS907 Gone but not forgotten 😔 TLDR, best purchase for value, have bought again 😀.

I first bought one of these to install against a cupboard in my kitchen to hang headphones from. I was so pleased I’ve since bought 2 more. The first has been up for nearly a year with no issues. It’s a very simple design with 3M adhesive and takes seconds to put up. It can comfortably hold up my airpod max pro’s which are some of the heavier headphones out there. I place mine on the hook upside down to stop the mesh from stretching out and it still feels sturdy despite it not being the correct way to use them.

I got this for the sole purpose of having somewhere to put my VR headset when I'm not using it. I have a Valve Index and it's one of the heavier headsets, weighing over 1kg so the maximum weight supported by the adhesive likely wouldn't cut it and I certainly didn't want to risk an expensive piece of gear falling off the wall. So, I drilled a couple of holes through it - which was easy enough to do as it's only made of a fairly soft plastic with a silicone covering - used a couple of my own wall plugs and screws and it works a treat. Much better and sturdier than using the adhesive on the back. If you're like me and you're using it for a similar purpose, do yourself a favour and drill it onto the wall, don't bother with the adhesive.

For a long time, I used to move my wired gaming headphones lying around when not in use, but the always made my work space look a mess. I bought this to put on the side of my desk and the it makes a huge difference to the look of my overall space. The adhesive has been more than strong enough. Not a mm of movement. I chose this because it is slightly curved, rather than flat, to help match the curve of my headphone band.

Collé sur le coté de mon bureau (ikea pour vous donner une idée du type de revêtement) depuis plus de 2 mois, il n'a pas bougé! Il est large mais pas trop, ce qu'il faut. Je mets dessus un casque de 300g et un petit casque de 100g. Le revêtement en silicone permet aux casques de ne pas bouger, donc très pratique. L'adhésif colle très très bien (a condition de respecter les instructions), il a résisté à la période de chaleur sans problème. Ce produit coute chère, peut être un peu trop, mais la qualité est au rendez-vous. Synthèse : + adhésif très efficace + revêtement en silicone + bonne taille pour un gros casque est un petit casque - prix (mais bon, la qualité est là)

Unlike other books that dig into the headband, this one is ergonomic and smooth. The headphones sit comfortably and it looks good. The texture is a soft matte finish and it adhered quickly, with no problems. I did let it sit for the 24 hours before hanging my headphones and it’s been great. Would buy again

It was just perfect for my needs. And it took just 2 days to reach me. Super

Top!!!!

Ich habe die Halterung ursprünglich als Wandhalterung für Fahrradhelme gedacht – leider ist sie dafür etwas zu breit. Aber das liegt ganz klar an meinem speziellen Verwendungszweck und nicht am Produkt selbst. Verarbeitung: Sehr hochwertig, stabil und sauber verarbeitet, fühlt sich angenehm an und macht einen langlebigen Eindruck. Design: Unauffällig und funktional – ideal für Kopfhörer und Headsets. Montage: Einfach anzubringen, hält zuverlässig und ohne zu wackeln. Für den vorgesehenen Einsatz als Headset-Halterung definitiv eine klare Empfehlung. Wer etwas Kreatives damit vorhat, sollte vorher die Maße prüfen – ansonsten ein super Produkt!