Dual Color 1.75mm 3D Printer Filament Bundle, 3D Printing Silk PLA 6 Spools Pack, White Purple,White Blue,White Red, White Orange, White Black, White Yellow, Silk PLA 250g X 6 Spools by OEM MIKA3D

I needed a bunch of different colors to make display cases for my handmade pins, and I didn't want to spend 100s on whole spools, so I decided to try these mini spools. I'm really glad I did! I haven't printed anything too detailed with it so far, but the test swatch came out perfect, so I'm confident it will work as well as any other filament I've used. The spools are wound great - no tangles so far, but you can never be too careful with that. I dried one and used another straight from the box, and both of them performed the same, meaning I had no problems with moisture.The colors are great except for the black. It's a warm black, which I personally don't like. It just looks kind of dirty. I'm not sure if there are other silk black PLAs on the market that look any better, though.The price was amazing. It had a 30% off coupon, which brought the price to about $27 for 1.5kg in 6 colors. That's a huge steal! I will buy from this brand again.

Not even thru the first print yet and from what I can see so far with 2 hours to go I just had to come on here and sing the praises. I got a $9 off coupon which makes it affordable otherwise I would not have spent the full 30 dollar asking price for 1kg of rainbow pla when it can be had for 20 dollars all day long.To the business: I've printed a few rolls of rainbow so far for my craft business (flexi animals) running the Creality K1 Max 3D printer. The 1kg spools have too long of filament run to print before transitioning to the next color. This is basically the 1kg spool split up into four with shorter color runs. End result is you get all the transitions on a relatively small 4 hour print which in my case are 2 flexi unicorns about palm sized. With the regular 1kg rainbow spool they printed in the same color range for the whole print. With my first mini spool of this I'm already seeing 4 beautiful colors transition and the print is only about an inch high this far into things. I cannot wait for it to finish because again, it's so shiny, so vibrant and it flows out of my extruder VERY nicely like a real low moisture pla with the right elastomer balance so I can already tell this pla will not clog unlike a few different types of silk gold which gives me heat creep problems where the gold elastomer in the plastic swells at anything over 220 degrees c for me and jams up in the heat brake right before the nozzle which normally means full disassembly of the print head to remove it when this happens. Again, it's a relief knowing I will not have this issue from this brand of PLA because with the stupid "AI" detection settings turned off on my K1 I can press print, go away and come back 9 hours later to a flawless silk print every time with a reliable filament like this. I wish it was around the 20-dollar mark without a coupon because I would run this exclusively. I am so confident my customers will absolutely eat up anything I print with this rainbow pla that I bought 3 while the coupon is still around. Would love to stock up on maybe 3 more If I can come up with the funds. Definitely will buy again, even at 30-dollar price

I purchased the Gold, Silver, Copper and Bronze multipack. The metallic look is remarkable! I've only printed in gold but the result looks great and I expect the other colors to be the same. I haven't found a PLA filament that has the same look, so I'm happy with the result. I printed the Buddha (100 mm tall) at 190c/50c and the Benchy at 215c/50c and had only minor problems with adherence. I print using a short raft and all of the adhesion problems were at the edges and didn't affect the final print. I did get some stringing on both, so I have to dial in my settings a bit more but overall I'm very happy with the results. Both the adhesion and stringing happen in most of the PLA I use, so I suspect it's a setting in the slice, not in the filament.There are a couple of "con's" with this filament. The spools were smaller than most I have purchased (250g per spool vs. 1000g). You have to read carefully when you purchase...the 3 color set has 500g per spool but costs more. I wanted more colors to experiment with and the 100 mm Buddha is only 25g, so you do get a decent value for your money.Another con was the spools themselves. Mine came packed four in a box and the box had been dropped on its corner. This broke the spool a bit so that instead of a complete circle for the side of the spool, I have a divot/bite taken out of mine. It's not a problem on how my printer feeds the filament and I've had worse from other vendors, so it's a minor gripe that's more on the shipping and not on the product itself.Overall, a great filament and I'll order more when I run out of what I have on hand.

I purchased this as the picture shows a plastic spool which I need for my ams. Unfortunately it actually comes with a cardboard spool.Upping to 4 stars as this stuff prints great and looks incredible. Just fix the pictures so it shows the cardboard spools.

I have only used the yellow one so far but my grandson loves the toys I made and they are very vibrant easily found when misplaced

The filament is exactly what I was looking for but was improperly rolled. Causing alot of problems when printing due to the filament being tangled. I wouldn't be so upset if it was one of the six rolls, but every roll was tangled. If I wasn't home it could have caused a mess that noone wants to deal with.

Very pretty colors and great quality.

I really like the colors but there isn’t as much filament on the spools as they claim. I should have had enough to complete the bottom of this pot and as you can see it stopped less than a 1/4 of the way in to the print. Unfortunately I can’t find a way to contact the seller so I am leaving feedback here.

Lo compre por la variedad de colores y termino siendo una buena compraEl empaquetado viene al vacío, no tenía humedad.A la hora de imprimir, use una temperatura de 200°C en boquilla y 80°C en cama, a baja velocidad en la primer capa, y no tuve muchos problemas con la adherencia (si los llegaba a tener, usaba el pegamento en barra que incluye).Los colores son tal cual vienen en las fotos, y también se agradecen las muestras que envía como regalo.