Rust-Oleum High Performance Wheel Spray Paint, Gloss Black

Easy to use great color good coverage great drying time very durable highly recommend

I'm always hesitant to spray parts but this paint went on solid. Wheels came out looking fairly decent for spray paint, the sides of the spikes came out a bit rough but the face is smooth. The "metallic" bits get pretty airborne. Everything was masked but there's still glitter that stuck to the exposed parts of the tires. The graphite is a slightly dark gray. It looked charcoalish online. I was hoping for sometbing more gray, so I'm pleased. But FYI if you were going more charcoal. Easy to use. No clogs. One can more than covered a wheel. Hopefully as durable as the application.

I love this paint, my wheels was chipped and faded really bad, after a good sanding, I gave the wheels a couple of light coats with 1 heavy coat. Drying time says 10 mins between coats but I let them seat for about a hour to let it get a good cure. On the road they are holding better than I thought they would. I highly recommend

Sprays on easy and dries fast!

ordered two cans, first can shook @ 3-5 minutes after bearing was heard rattling inside, sprayed clear for a moment then started to spit and sputter clumps of paint. OK maybe I got a bad can. Second can, same method for shaking only this time the bearing inside seemed to get stuck while shaking. Tried to spray...same problem spit and sputtered clumps of paint. So, I'm thinking two cans with the same issue? Not sure about bad shelf life because I've had cans of paint that were a couple years old and after a good shaking worked well so i believe the product/manufacturing is bad.

Was not happy at first, I have used VHT in the past and worked great but thought I would try this. It dried too quick and the clear did not shine up and felt rough. What I did figure out was after you put your silver coats on, clear it after 10 min flash time, let that dry and take a grey scotch pad and run it over the wheel, making it dull, then put 2 more clear coats on it. Looks fantastic after that and the sheen is even. Waiting to get the tires put on so I can't give any review on durability, but this is for my toy car anyway.

The cap on the can makes it look almost black, so I was worried it would be too dark. I would say the application color is definitely more of a dark grey and not black, which is what I was hoping for. I needed two full cans of paint to completely cover all four 16” wheels. Followed it up with 2 coats of clear.

So first let me say that I had no issues with the spray quality, no “spitting” until the can was really low. Other than that the spray quality was great. Very nice even coverage and very forgiving of minor mistakes. I followed the directions on the can. I scrubbed the wheel thoroughly, rinsed and dried then removed the wheel from the vehicle and placed it on sawhorses. The longest part was taping it off but worth it if you take your time. I started with one light coat and followed up ten minutes later with a heavier coat. Waited another ten minutes and pulled the tape off. I did this for all four wheels. Total job time was six hours including scrubbing and clean up. I’m a slow perfectionist so you may get it done in less time. Lastly, it took one and a half cans to double coat four 17” wheels. I couldn’t be happier with the product and the outcome. I can’t speak of durability and longevity but I’m keeping my fingers crossed. My before & after pics should help.

The quality of the product is good, gives a nice spray and dries off quickly, adhesion is good., I think the price should have been a little less so a bit pricey , gives a Matt finish , good for painting on those scraps on the wheels where paint has chipped off.