EAST OAK Outdoor Storage Shed, 7×4×8.2 FT Waterproof Resin Tool Shed with Window, 152Cu.ft Outside House Shed for Garden, Patio, Lawn Mower, Bikes

This shed has an excellent quality. Once you start putting the panels in place it becomes obvious how it goes together. You can refer back to the owners manual whenever you need. The instructions are pretty good. my 9 year old son helped me on this . Most everything is UV resistant plastic with stainless steel fasteners, so it should last quite a while. The manual recommends hand tools. I went ahead and used my power tool being very careful not to over tighten the fasteners. There are a few places where you need to drive a self tapping screw through the plastic. It may be helpful here to drill a small starter hole if you are using hand tools. I have stood inside it during a heavy rain to check for leaks, there were no leaks. The shed is meant to be fastened down to a surface. The installation kit comes with concrete anchoring bolts for fastening it to a concrete pad, but if you don’t have this you’ll have to come up with something else. Though the shed weighs at least 250 pounds , a strong wind will blow it over if it is not fastened to a secure surface. We currently have it fastened to a wooden platform I made from the wood pallet it was delivered on. I painted the wood I used for the platform with several coats to weather proof it before I attached the shed. Then the platform is sitting on two pressure treated 4x4’s to keep it off the ground. I used ground anchors to tie the wooden platform to the ground for insurance. A concrete pad is ideal. All in all it’s a good shed and works well for storing our yard tools and a push lawn mower. Highly recommended.

It took my adult daughter, teenage son, and I about 5 hours to put this together, with time for breaks. The pieces do not all come with pre-drilled holes or even dimples, so having a drill bit to pre-drill my own holes was a life-saver on a couple of stages of the build. A cordless drill is essential. If you try to build this with a screwdriver, you will be doing it all day and end up with forearms like Popeye. Have a step ladder handy as well, as putting the roof pieces in place is impossible without elevation. We also used a rubber mallet, as several of the corners and framework pieces kept wanting to inch their way up as we were trying to screw the walls together. I've only had it assembled for a couple of days so have no idea how weather-tight it will be, but it looks nice and looks to have good storage capacity. For about 1k, it so far, seems to be a good deal. **Update** It has interior leaks at all four corners and one side of the window leaks as well. Will work on sealing them this weekend before I store stuff in it

One of the pieces arrived damaged so I reached out to the customer support team for a replacement and they responded within 24 hours and had my replacement shipped out within the week. Upon arrival, they reached out to confirm the condition of the piece and it was in great condition. Shed is up and working great now.

I did not like that the manual did not have good videos. This product should have videos on how to install and put together.as expensive as it is it should have better installation instructions and a video on installation.

I installed the shed by myself and took 3 evening to complete. It could be better with extra hands help when putting the roof up. Still I could manage did all alone. It’s pretty sturdy once set up completed.