Thermalright HR10 2280 PRO SSD Cooler, Double Sided Heatsink, Carries 14.8W/m.k Silicone Pad, Includes 4 heatpipes, Reflow Process, 2280 SSD Heatsink Cooler for Desktop

This cooler works great! The high speed pwm fan is basically silent. Keeps my drive running way below thermal throttling temps. The price is nice too!

I bought this because my Gen5 NVME was overheating and thermal throttling. It's easy to install, has great clearances and works well. Totally worth it. The only gripe is cable management, the unit has a very long power cable and isn't modular.

Excellent M.2 SSD cooler. Very reasonably priced. Incredibly effective at lowering SSD temps. Nothing over 54C under heavy load. Superb!

The product works great, WITH CORRECT PADS. I’m using five Gen 4 NVMe m.2 drives, THREE Crucial P3 Plus and TWO Samsung 990Pros. The P3 plus isn’t super hot to begin with but still hits 80C+ easily, the Samsungs are HOT and regularly hit 90C+. This cooler drops the temps by 20-25C, after changing the pads to the correct thickness. I do a lot of video editing, some gaming and would typically see my drives running at 80-90C+ with regular heat sinks. They’re all rated at 70C before throttling…. The stock thermal pad these come with is WAY too thin and does not touch all of the chips on the drive. I replaced the thermal pads with 1.5mm GElid Ultimate pads (brand isn’t as important, thickness IS important). With the 1.5mm thermal pads the cooling is substantially better dropping on average 20C because it’s actually touching all of the chips. I control the fan speed with Fan Control software and at 100% they rip at 8000+ RPM!!! They RIIPPP!!! Under normal conditions the fans at 30% is absolutely enough. Under heavy workloads and gaming the M.2 directly above the GPU (typically the OS/program drive) WILL get hotter than the rest so with the fans at 100% at 60C they stay nice and cool. This particular drive is the one monitored in Fan Control and m.2 fans speeds are set based on this drive. Under heavy workloads with a regular heatsink 80-90C+ and with this Thermalright fan heatsink the temp runs at 60C MAX! I work A LOT using my pc (video editing) and play some games and this keeps my drives running at full speed ALL the time. Because of the thermal pad being too thin, 4 stars. Definitely would recommend this product for GEN4 & GEN5 drives, just change out the thermal pads it comes with to1.5mm pads touching the chips and controller. Be sure to compress the pad/plates to where they all touch and tighten the screws while keeping pressure on the plates.

This little thing is a game changer. I believe anything that generates heat should have a cooler. It’s easy to set up and dropped my temps a few degrees. Plus it looks pretty cool in there.

Bought this for a new computer using gen 4 SSDs. My high load degrees were up to 49 C with my original heat-sink that came with the computer. With the Thermalright model installed, I operate at 44 to 45 degrees load. My SSD was already quite low, but the Thermalright did lower it several degrees more. Gen 4 SSDs typically run much hotter under load. Industry norms for gen 4 is 60 to 70 C under load. This heat-sink works more dramatically the higher the running temperature, so I am happy with the purchase.

My M.2 was idling at 68C on boot before install, now it's at 38C. NAND thermal throttling was kicking in after 10 seconds of read/write before hand, now it never throttles and maintains max speed. It's simple, it looks good, what more can you realistically ask for?

I had the Thermalright HR10 2280 PRO SSD Cooler in My box for 1 year and this unit is still kicking Everything is as cool as could be and can't even hear the thing running I've Ran some video editing Programs thru and still running verry cool I highly recommend! Also you don't break the bank with this one. If you need A memory cooler this one is the bomb!!!!

Tengo un HP EX900 Pro NVMe que sin exigirle nada alcanza los 50°C, y exigiendole alcanza los 68°C, compre este disipador y en reposo no mejoro para nada los 50°C pero al exigirle no volvio a llegar a 68°C, lo maximo fue de 51°C

It would be good if the length can be made shorter by few mm so that it will not block the screw hole. The width should be also made a bit smaller (perhaps by 0.1 or 0.5mm) so that it will not fit too close and touch other component in the motherboard.

SSD'ler için soğutma performansı güzel ama büyük ayrıca birazda ağır , iyi bir anakartınız varsa sağlamsa olabilir. Yoksa düşünmeniz gerekiyor. SSD soğutma değerlerinde güzel sonuçları var. Fiyatının hakkını veriyor

can dissipate heat from samsung 980 pro gen4. if it fits your board get this one. i wish they put copper tubing to get more heat out but from temp reduction i got it really great. now 37-40 Celsius

ممتازه سابقا الهارديسك كان حرارته توصل لين 60 و 70 بعد تركيب الهيتسينك دا انخفضت الحرارة الى 50و 45 في الوضع الطبيعي واللعب ♥️