MX-6 (4g) CN

I purchased arctic MX-6 on 2024 august and repasted my Laptop|| Asus Rog strix g15 2021 model (G513QM-HQ403TS) - Ryzen 9 5900HX cpu and RTX 3060 gpu ||I was using Coolermaster cryofuse violet it was initially good but after 6 months of use i got bad temps on my GPU like 87°C on die and 103°c on hotspot this happened even after locking the clock to 1850mhz and setting core clock offset to 150 mhz undervolt with the help of GHELPER.Then i searched on internet for guidance which lead me to MX-6 and i am so happy with temps right after repasting my laptop gpu with mx-6 ( now i locked the gpu clock to 2100mhz with core clock offset to 150mhz undervolt ) now the RTX 3060 hovers around 75°C to 85°C on gpu die and 90°C on hotspot but it doesn't throttle the clock or reduce the power always stays at 1950+ mhz with power draw averaging 112- 130 watts on fulll load which is mind blowing performance i am getting out of MX-6, I am so grateful to arctic for making this awsome close to perfect product i mean seriously while i was repasting i was so confused on how much to apply with x method and ended up using more and made a mess but even so the result came out great but could have been better if i took my time and applied correctly " next time baby cos bought 4gm tube i think that will be enough for another 2 applications if it won't dry out in 6 months i hope that won't happen besides i am gonna use remaining mx 6 on my brother's laptop which is asus tuf with i7 12700h and 4060, xd "( please don't be like me guys the proper method arctic recommend to use is dot or x application- Arctic have a official youtube channel and they uploaded a video showing the proper method to apply the M-6 Thermal paste)Since my laptop came out of factory with pre applied liquid metal i decided to go with liquid metal for the CPU so i used leftover subzero M79 liquid metal thermal compound from my last repaste (unlike MX-6 or cryofuse 'liquid metal' is a very risky thermal compound don't even think about using it if your laptop heatsink or cpu/gpu isn't factory shipped with liquid metal and barriers to protect it), i myself gonna go with mx-6 on cpu next time lol anyway for the vram and vrm and chips i used 0.5 mm thickness Gelid gc extreme thermal pad 👍Again Thank you Arctic for making such a good thermal paste ❤️‍🔥🙌

Great paste for Die to heatsink use, as the paste is very viscous it should not pump out easily and artic pastes are pretty good in terms of reliability. It can be a bit hard to apply so be patient and you will get there.

This paste is magic. I built a SFF PC where temps are quite important. I was finding it particularly hard to cool the CPU an AMD 9600x. I had the best possible CPU cooler too for the small case I have. The temps weren’t that bad. The idle temps were between 62-70C which is not that high but also not as cool as I wanted. Without much expectations of lowering the temps further I purchased this paste to maybe give it a try. And voila!!!! The temps are down by a whopping 10 degrees. I had expected like a 1-3 degrees difference but this paste surpassed my expectations. No wonder it’s considered the best currently. Totally recommended.Just one advice apply in a cross manner. It works better. It did for me atleast :)

This is the best product for thermal solutions for your CPU and GPU. Thermal paste on my GPU was so dried up even it was in warranty (pictures enclosed). Now it is quiter and performance is better than before. Getting GPU temp around 50 degree which was around 85 degree before.Happy with this product.

see i assembled my own pc in 2020 mid of the year now its 2025 February 7th just now i applied the paste to my pc as the old paste which was came along with deep cool mx270 liquid cooler was totally dried up so i cleaned up the processor and the cooler using alcoholic cleaning solution not to mess up the electronic components after that i applied mx 6 thermal paste in first start of the pc i didn't noticed much change i just restarted my pc once literally it reduced the processor temp a lot usually when i using regular browser tabs and other word docs opened the temperature was 60- 65 degrees but after i applied the paste it came down to 52 to 55 degrees which is huge plus for me as to reduced more that 10 degrees you can say it really have good heat transfer properties but the thing is the cost is higher when compared to other pastes in the market i ordered mx6 4gm one for 899 Rs as per cost its high but as per thermal cooling its definitely worth to go and also other said that 4 gm paste can be used for 2.5 times around but for my pc i almost used 60% plus of paste already it hardly come for 1 more time mostly but yes if it can withstand heats for another 4 to 5 years then its definitely a good to buy product so i gave 4 star little disappointed for the price and quantity but nothing cost much when compared to my 2.5 lakh gaming pc lol if it can save my pc from the heats

As such the Thermal Paste performs better than MX-4 or MX-5. The paste performed better than any other ones I used recently especially on GPU die. It with the AIO brought down the temp by at least 10-15%. I liked the product but, had to return it because (it was expensive) could not keep the broken opened paste, which would eventually go dry because of the damage during shipment. Amazon's replacement was lost in communication hence, Amazon decided to refund, although I wanted the product. I will now, order new one.

BEST THERMAL COMPOUND but its hell sticky and they don’t gives any spatula, i recommend using your credit/debit card to spread across on the cpu , but if you don’t want to get your card declined after that, use a god damnn spatula!! Spatula is not made of gold buy it from anywhere else!!

Really good for CPU and GPU for Laptops.