Epoxy Resin 1 Gallon - Crystal Clear Epoxy Resin Kit - Self-Leveling, High-Glossy, No Yellowing, No Bubbles Casting Resin Perfect for Crafts, Table Tops, DIY 1:1 Ratio

I have been using this epoxy resin and it is great. Reliable, clear, easy to use, and its the best resin I've used so far. Well worth the money. There's A learning curve to using resin. Here's my method and tips: if you have long hair, tie it back. Its inevitable you'll get resin in your hair if you leave it loose. Wear old clothes and shoes. You'll get resin on them. Buy some denatued pure alcohol, ethanol, to clean up with. It works way better than isopropyl alcohol. Use a level to check that your work surface is level in all directions. Cover it with waxed paper. Overlap the edges of the waxed paper by at least an inch. To measure and mix this resin easily, use the pumps to do that. Use a big clear plastic cup. I use two wooden coffee stirrers to.mix with. Alternate 1 pump of A, and 1 pump of B into your cup until you have the needed amount. That way its already partly mixed in your cup. Now, stir it thoroughly. At first it will be cloudy and have streaks. Once its totally mixed it will be clear with no streaks. Be sure to scrape the sides of your cup while stirring. Once its clear, its ready to.pour into your silicone mould. Don't over fill your mould. Let your filled mould sit undisturbed for 48 hours. If there are any rough edges or you got your mould a bit too full, use a utility knob be to trim.off excess. If your make my charcuterie boards, let them cure longer, until it's 72 hours from pouring, on a flat surface. I'm currently doing charcuterie boards with dried flowers and sea shells. I do one pour to fill the moulds half full and embed the inclusions in it. Dried flowers and greenery tend to float so be sure to press them down into the resin. I do that with my fingertip and then clean my hands with thevdenatured alcohol. With dried flowers, I make sure they are completely coated with resin on the back side, the upper side while working on them. About 6 to 8 hours later, I use waterproof India inks to create a colored background on the resin. I let the ink dry, then do the second pour to fill the mould. If have ordered colored mica powders, and translucent resin dyes to begin doing more types of effects and backgrounds. I've been using this resin to.make coasters and bookmarks, too. I sell my stuff in my stall at a big farmers market, with my other wares. I highly recommend this brand of resin because it never fails or has problems. I do not have any problems with bubbles, and getting two gallons at a time is efficient and cost effective. I get professional results every time. I bought and am currently using the first two gallons I purchased and then added it to my subscribe and save monthly orders for further cost reduction. I tried UV resin and it was awful. I'm sticking with this bc and of regular epoxy resin into the future. It does not release any fumes, either.

The kit is amazing allowing you a smooth entry into the world of resin art - you have every thing you need in hand - 68oz crystal clear Epoxy with 16 Epoxy Resin Pigment, Foil Flakes and - and silicon mixing cups - this alone will save you so much money. The resin is very easy to use - the cure time is great - i work at night and in the morning it's cured enough so i can take in out of the mold and letting is rest for full hardness. let me tell you that - i've re-order the kit!

I rehab discarded furniture and often use epoxy when doing so. I buy cheap, sometimes, and this was one of those occasions. I wasn't disappointed. The price is great and the product matches. I can't speak on drying time because I always let epoxy cure overnight at the very least. Workability varies greatly, depending on the type and amount of collecting agent used. Adhesive quality is irrelevant. They all stick to what they should, and don't stick to materials that are incompatible with. No epoxy likes smooth surfaces, so rough it up a little. Easy of use is irrelevant. Two-part epoxy is as easy to use as two-part anything. No matter the brand, when things go bad, they go very bad, very fast.

*⭐⭐⭐⭐⭐ Great epoxy resin!* Easy to mix, low odor, and dries crystal clear and strong. Perfect for my resin projects. Great value for 2 gallons. Very satisfied!

I bought this one because I wanted to find the middle between an affordable one and a good quality one. I’ve mainly used it for small projects like coasters, charms and trinkets. For the most part it always cures well, almost no bubbles or very few bubbles. But I have had problems with it not fully curing. I attempted a bigger project covering a side table about 2 feet wide and 2 feet long and was very careful with measurements and instructions. However it never fully cured.

I spend thousands on resin every year. Decided to try this one on a whim. 1. I was impressed it came with pumps at first. This is great if you're pouring a couple tablespoons. Annoying if you're mixing more. I took them out. 2. All resin has bubbles regardless what they say. This one did have fewer than the other brands I've used. 3. Part A is thinner than most so it mixes better with fewer bubbles. It also spreads easier. Be aware if you need it to stay in one place. 4. Odorless is also not a thing, but this one wasn't bad. Very mild and, oddly enough, somewhat pleasant. Weird, I know. 5. Liquid pigments need a little extra mixing, but it does mix in well. Powder pigments mix in quickly and beautifully. 6. Work time is a little longer than most. Got an extra 10-15 minutes out of it and that's a lot of time for resin. 7. Set time is longer. This is good for bubbles, etc. Bad if you are impatient like myself. 8. I haven't used it for a flood coat yet, but just with the handling I've had so far, I feel like a flood coat would do well. 9. I probably will buy this again.

Easy to use, messy but when resin isn't? Cures nicely, is clear in thin applications, dries reasonably fast.

You don't get 2 gallons you get 2 small bottles very very disappointed.

00:33 Is not 2 gallons of Resin Like its states in the description. I only received 16 oz which is not 2 gallons. I am very disappointed with this.

Is not 2 gallons of Resin Like its states in the description. I only received 16 oz which is not 2 gallons. I am very disappointed with this.

Too good to be true, but did get refund