Shoe Cobbler Repair Machine Leather Sewing Machines Hand Small Stitching For Cotton Nylon Line Manual Shoes Bags Clothes Quilts Coats Trousers Belt DIY

Calidad aceptable, bien calibrada, funciona a la primera

This machine arrives in mostly functional state, however go on youtube and you can learn learn how to set this machine up. There are a few moving parts on the machine that might need some observation to make sure they move freely. If any parts bind or rub they can be adjusted with washers at pivots to give rubbing parts some travel clearance. Use nylock nuts on some of these bolts, so they do not come apart as some bolts are there as pivots and not designed to be fully tightened. Many of the nut and bolt sizes are M6-1.0 Metric. Once you have the moving parts moving free and clear, then you should mount the machine on a wood pedestal riser and mount pedestal riser on a nice big flat piece of wood with rubber feet. Enough to clear the hand crank. Make sure machine is stable when cranking. Also lubricate all contact and pivot points with oil. The next thing to make sure is to know how to verify and possibly set the 'timing' if needed. This involves setting the rotating bobbin hook to swing right past the threaded needle, just as the needle goes to full depth and begins to go back up. Then learn to route the thread through the machine and set the thread tension. There are many youtube videos showing everything I have mentioned above. Once it is set up, it is an amazing machine! I have sewn through very thick material with zero issues. This machine is not 100% 'plug and play' but if you have the patience and some fabrication skills to set this machine up, you will have a machine that easily does what machines many times this price point can do. :-)

Its a nice little machine once you get it to work properly and works ok but you need to work on her there are lots of sharp edges you have to round over and polish , it needs a better instructions manual with more details the tools and machine stand they Suply are of poor cuality i strongly recommend making a custom made one as you prefer other than that for the price of it it is what you need as a hobbyist nice and sturdy

Very pleased. This one was well packaged and already completely threaded. All I had to do was mount it on the stand and start sewing. This was my first time using a sewing machine ever.

Could not get it to allow both needle and foot to rise at the same time. Watched every YouTube video that I could find, did complete disassembly and reassembly as shown on YouTube, all to no avail ! There was no successful phone support available! The stand was wobbly and to short to be on any use!