WSKENMatte Anti Glare Screen Protector for iPhone 14 pro 6.1 inch [Game Frosted Shield][Auto-Dust Removal] Full Coverage Screen 2.5D Edge HD Tempered Glass Film-2 Pack

This screen protector installer is simply amazeballs!! Once you understand everything, it’s not difficult to use. But the written instructions leave a little something to be desired. I HIGHLY recommend you watch the install video and follow along with the written instructions while you watch it.If you don’t have time to read all of this, then definitely watch the install video and also check out my “TLDR Summary”which will give you some rudimentary insight.***TLDR Summary***Install kit is incredible, has perfect alignment, is relatively easy to use if you spend time to read/watch/understand and it works great!! See bullet points below:— DO watch the install video, especially if the written instructions are confusing.— DO double check your phone is fully inserted in the bottom of the installer. Your phone will fit very snugly if you’ve done it properly.— The installer comes PRELOADED with your first screen protector already inside it and ready to be used, so…— DO NOT touch anything (other than what it says to) on the inside top lid.— LASTLY, when it says to wait or press for X seconds or slide your finger X times, etc… do ALL of these steps 2X as many times as instructed before opening the installer lid. This will increase odds of successful adhesion to your phones screen.Good luck!! 🙂NOTE: So if you’re at all like me, you’ll appreciate my longer review and included tips below. Helpful for anyone who is curious, doesn’t mind reading, lacks attention to detail, gets confused by less than clear written instructions, are not hands-on or have comprehension issues. You may skip over these tips or read the TLDR summary above instead if you wish. But I highly recommend you read all below.So I must admit I was a bit skeptical on whether this screen protector install kit system would actually work. But I bought it anyway because I just got a new phone, we were in the middle of a blizzard (so no way was I going out in that stuff to a retailer for one) and I was curious 😂.Please don’t get me wrong… now that I understand it all, I can say this kit is super easy to use, very fast and incredibly accurate. I’m just not a very hands-on person and instructions confuse me for many things…at first. Since I know that I lack attention to detail, miss some basics and have comprehension issues, I have to spend extra time to decipher and understand things first. Buuut… I’m also impatient (like most everyone is these days lol), which gets me in trouble a lot 😏😉.Straight out of the packaging, the kit looks pretty cool. It’s a hard plastic clamshell style rectangular box that when opened, your chosen phone will fit very snuggly into the bottom of so you can install your screen protector without error. I actually really love how snug the phone fits, because that means super accurate and straight alignment of the screen protector onto the screen.I will say the written instructions are rather confusing, leave a fair amount to be desired and up for interpretation. Even after I read them like 3 times, I still wasn’t grasping what it wanted me to do and when. It was almost like the instructions were missing a vital sentence or something. At least for my brain they were.I slowly and carefully examined every part of the installer, making sure to read each side, each arrow, each piece, to try to grasp the way it should be used. Sadly, I also started touching everything too while I examined 🤦🏻‍♀️ . DO NOT DO THAT lol. I screwed up the adhesion of my first screen protector by touching stuff I shouldn’t have 🙄. So, that’s when I finally got smart and decided to watch the install video clip they provided, which helped me immensely.I recommend you spend a little extra time during/after the video (but definitely before trying to use the installer) to examine the items included, to read the semi-confusing instructions and for comprehending things. If you do, you should be successful on your first attempt.TIP 1: WATCH the install video provided on the Amazon product listing, or via the link provided on the instructions BEFORE you do a single thing. I screwed up my first screen protector just by touching the sticky part that you aren’t supposed to. Don’t be an idiot like me and start touching everything 🤦🏻‍♀️ 🤦🏻‍♀️ 🤦🏻‍♀️ lol… watch the video. It’s only a minute of your time and will save you from yourself 😂.TIP 2: DO NOT touch ANYTHING on the inside top lid of the installer!! If you followed my tip 1 above, you’ll already understand why. If you didn’t follow tip 1 above… scroll up, read it and do it lol. Your install kit will come PRELOADED with the first of four screen protectors ALREADY INSIDE the lid and ready for install on your phone. If you touch anything in the lid that’s preloaded (and sticky)… other than the little plastic pull flap the instructions say to put on the outside of the case (bend it backwards at the crease for ease) so it stays on the outside of the case once the lid is closed, you WILL compromise the seal at which your screen protector will adhere to your phone. So… fingers and hands off, and be careful to only touch what the instructions and video tell you to. If it looks sticky, or isn’t noted in instructions or video, then don’t touch it!TIP 3: Double check your phone is fully seated properly in the bottom of the clamshell case before you close the lid. When I say your phone will fit snugly, I really mean it. The first time I put my phone into it, I thought it was all the way in but I pushed on the sides and corners as a double check and sure enough, it wasn’t fully inside. Press your phone down with a bit of strength/force on each corner until your phone kind of snaps into place. You’ll know when it’s correct, as the screen of your phone will be flush with the top and sides of the mold you snapped it into, your phone will not move a millimeter and it will feel very secure.TIP 4: all steps that say to wait for X seconds, press for X seconds or slide your finger X times… double them all. I don’t think they included enough seconds or times in the instructions for proper adhesion, because when I started lifting the lid after following instructions to the letter, it was difficult to pull the lid up and I could hear a strange sound, like a sucking/tape sort of sound. I figured out mid-lid lift that the screen protector was not fully attached, so I immediately closed the lid and did the wait/press/slide steps again. And it worked!TIP 5: After you lift the lid, leave your phone secure while you use the tool included to help remove errant air bubbles for a full seal. You’ll appreciate not having to hold your phone and do that step. Better to have use of both hands. Press firmly and slide fingers all around the screen to help remove air bubbles or pockets. You’ll know if you got them all because they’re easy to see if you have any.TIP 6: 1-2 days after installing your screen protector, there is a small chance one or more of the edges of your protector will form an air bubble that previously wasn’t there. It happened to me. I had to REMOVE my phone from its protection case, place it on a very hard and flat surface, and press on my phone’s screen with all my life in those air pocket spots to remove them again. An hour later, even though the air pockets didn’t return, I did the firm pressing again, just for good measure. Keep in mind that you’re pressing on an extremely hard piece of tempered glass that’s on top of another very sturdy and durable surface (iPhone screen), so don’t press gingerly. Put some muscle into it. You won’t hurt your phone or the screen protector. And even if you are the strongest person alive and do crack your privacy screen, it’s okay… you have 3 others included with the kit. 🙂I’ve successfully had my privacy screen protector installed on my phone for 3 weeks now and I LOVE it!! It does darken my screen quite a bit, which idk why but I wasn’t expecting that, so I’ve had to find a new display brightness setting that works better for me with it on. Touch sensitivity is like nothing is even on my screen… in other words it works great, I’m very pleased with this purchase and it was worth every penny! Buy it! You won’t be disappointed.

Fits phone perfectly and looks good, holds up to scratches and drops. Has been on my phone for over a year and not gotten bubbles. Applies easily with usage of application device.

I was really excited to get this in the mail because of all the reviews. However, upon installing it, it is not matte at all. Definitely not anti-glare either. For the price I bought it for, it’s not worth it. I thought it’d be better since it’s a little expensive. The installation was easy, but the QR code they provide actually takes you to a page with ALL their instructions. I had to go through each one to see which one I should watch. Dust still actually got in and I have a small bubble because there’s a little speck of dust. I would take it off if I had another screen protector.

First, this is THE easiest way to install a screen protector hand down and I challenge anyone to prove me wrong. Does not interfere with camera quality at all. As for anti-glare I wouldn’t say it is anti-glare but I didn’t purchase it for anti-glare I purchased for the privacy which it works great for. My only issue is that one protector had a deep scratch on the application side of it and didn’t notice until install so I only ended up with one protector because obviously I threw the bad one out. Second one was pristine and applied flawlessly not a single bubble or spot of debris. I highly recommend this product for the iPhone 14 pro.

I bought the privacy version later on, but was disappointed with how it interfered with Face ID. Face ID does work, but it becomes much more finicky. I even tried resetting my capture face, but it became way too much of a hassle. The clear screen is great, just not the privacy version.Screen protector I bought in Japan had same kind of system, but was flimsy. Works like the Spigen screen ez system, except this makes it so you don’t have to have separate dust stickers, this basically removes the tiny dust specks in one fell swoop while attaching the screen. It’s quite clever. Comes with a squeegee to push out any air bubbles, super easy install.

Second time I’ve ordered this kit. This glass works great and it’s easy to use. I like the fact the whole kit comes together. It makes it soMuch easier to get the glass placed right with no obnoxious bubbles. I also like that my screen now repels grease and finger prints.

This was the easiest to install and just the most quality screen protector that I have that goes completely to the edge. The reason for 3 stars is that I cannot use my quad lock case. Since the protector goes right to the edge my case pushes up on it on the corners no matter what. So I am unable to use my case which is expensive and specifically made to mount while riding my motorcycle, so in my case I cannot use this screen protector.Another reason is that I got this is because I wanted an anti-glare matte protector. It is SLIGHTLY matte but I can still clearly see reflections vs other protectors. This is mainly the reason was for anti-glare but despite it being such good quality, it is not as advertised.I have used it for the past few days using another case until I get a new protector and it is great, very fingerprint resistant and love how it fully covers the screen. So if you don’t care about antiglare or have a case that fits than I’d say this is a great screen protector

The first one I got was defective. I contacted WSKEN customer service for a resolution. Anne was the rep who helped me - she was friendly and responsive, and offered to send a replacement. From initial contact to receiving the replacement item was only 4 days! The new item works flawlessly, and the screen protector is great. It provides the privacy as advertised, and it has a great feel - not too grippy like some screen protectors. Feels like the original Apple glass. I would definitely buy this product again, and will definitely buy other products from WSKEN based on how they handled the replacement of a defective unit.

Super easy to use and install. Directions are straight forward, came with a 2 pack used one for my wife and I. So far so good, we will see over time but I’m liking it for now!

I had an issue with one screen. I notified the seller who issued a refund

This screen protector kit is the best I’ve used! It takes out any contact with the adhesive and is really simple to do!

Wenn man eine Schutzhülle auf dem Handy hat, lösen sich immer die Ecken des Schutzglases.

Gute Folie für wenig Geld und das schon zum zweiten mal. Sehr einfach zu installierten ohne Lufteinschlüsse und Staubpartikeln. Privacy ist gegeben und es kann auch mit dem Case (Original Apple Leder) verwendet werden obwohl es „fast“ von rand zu rand das Display abdeckt.Werde mir noch ein paar aufs Lager legen