IBOAT360-2 One Fit 1-3/8" Carbide Extreme Storm Titanium Metal Blade, 2PC, Multi

Came very fast. I’ve used this brand before with great reliability.

I ordered these after removing the teeth from two other blades trying to cut through hardened cement spikes that had been used to hang my old cabinets. The first of my blades to die was a general-purpose wood/metal blade - it just couldn't handle the hardened steel spikes, although it had been fine on nails previously. I then purchased a $20 carbide blade at a local hardware store. It made it through two or three spikes, but by then there were big sections of the blade with no teeth.So I ordered these additional carbide blades from Amazon. I was very pleased that they seemed comparable in quality to the locally-purchased carbide blade - but were much, much less expensive per blade. I then used one of the blades to remove all 6 of the remaining cement spikes - and it still had all its teeth left when I had finished. This improvement may in part be due to a change in strategy - instead of applying a lot of pressure to the blade, I took it slow and let the blade work its way through the spikes at its own speed, and moved the blade back and forth so that no one spot was taking the full load. By the end, the teeth weren't quite the way they started - there was some wear (understandable - those spikes are tough!), but they were still enough left for my next job - and that leaves me 4 additional new blades as backup!

These are worth the money they last longer than the standard bi metal ones.

Was only able to get two nails cut it before blade failed I have bought these in the past never had an issue like this I purchased a five pack I must have received a bad batch.

These blades last longer than any other comparable blades. Let the blade do the cutting and you will not even see marred teeth for 20-30 cuts

Worked well, never dulled. I saw some of the pics of people having the teeth all worn out......you can’t just grind down with all kinds of pressure on a nail or bolt. He will destroy any surface. Use light pressure and let it float on the nail. It’ll work it’s way right through and not wear out. I did have mine break at the mount, but I’m missing a tab on my tool, so there were only 2 points of contact instead of 3......probably the issue for its failure, but it’s also why I gave it 4 stars instead of 5. None of my other pieces have done that. I would buy again though.

Cut through one deck screw and then dull dull dull.

We had to cut off screws that were seized up on a captain's chair on our boat and a cutoff wheel was a PITA. These blades made super quick work of it and after cutting 8 bolts the blade was just like new. I have since used it for nails as well on other projects. This is a purchase that everyone should make because it is a pain to try and sawzall or use a cutoff wheel that breaks every 5 second or a grinding wheel that is too thick. These blades are just the ticket.

Genuinely amazing, have cut through mild steel, wood, brick, plaster and they are as good as new, except for a few scuffs to the paint.

Could not cut vertically through a single nail with fresh blade.Advertised to be able to cut through hardened steel bolt.I feel completely scammed here and my window for refund is closed, did not have a chance to put blade to the rest until today I guess that’s my fault for not checking to see it it worked as I should but I would have expected to get through at least one nail in this manor not a burnt out blade after making it a third of the way through the first nail.Customer service please contact me.

En achetant un outil oscillant Dewalt, 2 lames venaient avec dont une pour le métal. j'avais coupé 3 vis et la lame n'était plus utilisable parce que trop usée...J'ai donc acheté ces lame et la différence est notable. J'ai coupé de l'aluminium avec et, pour le moment, la lame fonctionne très bien. Par contre, la lame n'entre pas correctement dans système qui retiens la lame, sur l'appareil... Donc, je me questionne à savoir si c'est normal...UPDATE3 réponses à ma question à savoir si c'est normal et les 3 réponses sont concluantes: Les lames devrait bien entrer dans le système de Dewalt. Et comme on voit sur mes photos, ça ne fonctionne pas. Lame qui n'entre pas correctement dans les dents est la Imperial Blades. L'autre est celle d'une autre compagnie. Je n'aime pas et j'aurais peur que la lame débarque et me blesse. Je vais donc les retourner.

I purchased these blades for my Dremel. The original dremel branded blades are such a rip off because they wear out fast and are too expensive. I thought I would try these. They came with an adapter so I could use them with my Dremel. And these blades with the adaptor are FANTASTIC. I’m very satisfied and I’m now ordering them again. Very durable and are a solid fit with the adapter.

I used it once to cut metal for about 30 seconds and like you can see on the picture, it doesn't work, the blade is made out of soft metal i guess... they send me a replacement.Second blade just break after 15 second after using it ! My Fein s blades are better for cutting Metal ...