Dakine Spike Stomp Pad

Just bought one for my buddy because he got a new snowboard for Christmas. I’ve been using mine for two years now and have absolutely no issues with my stomp pad and my boots always grip on this pad.

I've used these stompads before on prior snowboard so I decided to get a new one for my new replacement board. Quality is just as good as the one I've had for years. Follow the directions and they stick extremely well. My only complaint was with the shipper and how it was packaged. It came in a loose in a bag and the stomp hat was no longer flat. It was badly curved and I didn't think that I was going to be able to flatten it out. I let it settle overnight in the next day took a heat gun on a low setting and slowly warm to stop pad up then let it cool on a flat table with a book on top of it for a little bit of weight. I cut the stop pad and five strips follow the manufacturer's directions on how to apply to the snowboard and it works great. My foot is very secure while out of the bindings getting off the lift

Super worth it, I put it on wrong (i.e. 90 degrees off) but still works great. Great grip.

If you need a great stomp pad that looks rugged and grips well this is the one. The installation was easy and is now holding as of 3 days on the mountain. Still looks brand new thus far. No signs of the adhesive letting up. Follow the installation instructions included and you will be happy with the final result.

Legit stomp pad - it’s actually awesome looking and quite functional- sturdy

Probably would give this a five-star but if you're like me and like to filter by four-star reviews then this is for you. This does a perfectly decent job and is well worth the money. The spikes are much deeper and harder than I was anticipating. Also, the pad itself is not completely flat but shaped like a shallow "U" so the nose and tail board side edges are a bit taller than the toe and heel foot edges. I'm glad I read the reviews about removing the plastic sticker backing before heating and applying to the board cuz that would've been tough to spot with the naked eye.

I almost didn't purchase this item because of all the reviews saying this doesn't stick well; I'm glad I took a chance. Product arrived on time. Followed the directions and this thing stuck like cement! I decided to cut mine into strips so I had a larger foot print area and it still worked great. I've been out 4 times abusing my board, some of the days being cold in the single digits, and this pad is solid! Also, the larger spikes gives excellent grip even if there's some snow build-up on the board. How I installed: -made sure my board and pad were room temp by leaving inside overnight. -cleaned the board surface with rubbing alcohol and let dry. * *Pro Tip: if the top of your deck is high gloss, before the alcohol, try using a scotch pad or light abrasive to carefully and gently scuff the surface only where your pad will contact* * -used a blow drier on hot setting and warmed the board surface and sticky side of the pad for 2-3 min. -peeled the clear plastic from bottom of pad to expose the adhesive and stuck it onto the board. -I set a couple soft cover books on top of the pad and a 25 pound weight on top of that and let it sit for a day. When all was said and done I tried to see if it would peel off but it wasn't going anywhere. Hope this helps, enjoy!

This is my go-to stomp pad for all my snowboards. Easy to apply (follow directions) and never had one fall off even after years of use. Gives great traction in all snow conditions.

The peel-off backing on this stomp pad is a thin transparent plastic sheet. If you are not careful, or if the adhesive has bonded with the backing (for example the shop had it in storage somewhere warm maybe), the adhesive will come off the pad with the backing, basically rendering the pad useless (unless you use your own glue…) Basically, follow the instructions and warm everything up, but be aware that there is a very very thin plastic (why, Dakine?) backing. If what you are peeling is thick, stop; you are peeling off the adhesive.

Works as intended. Have been able to use a heat gun to remove and reuse 3 times and no issues with falling off while boarding.

Très déçu du produit, celui-ci n'est pas prévu pour être séparer en plusieurs parties pour être placé sur la planche. Si c'est le cas. C'est très mal conçu...les séparations sont tellement épaisse que la découpe est ne peut pas ce faire proprement...dans mon cas le ruban adhésif s'est carrément détaché puis devenu inutilisable....bref un cauchemar... Si vous voulez l'utiliser en séparé fuyez ce produit...

Sticks strongly to the board and is just the right size to clean your boot or to give you some grip when your back foot is out of the bindings on the lift

guter Halt und klebt gut auf dem Brett. Ich hatte bei der Montage mit Waschbenzin vorgereinigt, dann mit Föhn beide Seiten aufgewärmt und dann einen Tag mit Schraubzwingen stehen lassen.