Single Light Switch Rocker Button Switch with Phosphor Dots Modern Crystal Glass Grey Wall Panel Electrical 1 Gang 1 Way, 10A 250V

Had an old dimmer switch connected to one side of the 2-way lights, during a recent party the dimmer knob seems to have been misplaced leaving just the plastic bit sticking out. Not sure why I never replaced it sooner since the bulbs don't dim anymore - at least via the dimmer - we swapped for smart bulbs instead so when we accidentally turned the dimmer the bulbs went into what I liked to call 'disco' mode, flashing on and off like a poor mans strobe light.Anyway, this was an almost direct replacement albeit the connectors aren't all on the same side so had to manipulate the cables in the back box a little to get one connected at the top and two at the bottom. Luckily I had plenty of play in the length but if you're existing cables are shorter then check the positions first.Ignore the product images that make it look like you put the cables in where the screw holes are - this isn't possible or safe. The cables go in holes at the top and bottom of the black block and you use the screw to tighten down onto it as with any normal connection.Once connected it was simple to screw in and get level since the connector block gives you some manoeuvrability in the position so even if your existing socket was a bit wonky this should allow you to level it up.Click on the cover panel and all the screws are hidden. Gives a nice solid 'click' when operating and looks nice against our grey walls. No issues with the 2-way switch on the other end, operates exactly as described.

This is a great looking switch, although the wiring diagrams make absolute no sense as they're not designed for UK homes. You need to look at the picture on the product page to know how to wire this, and then it becomes really easy.The switch looks fantastic, is an easy replacement that is to standard size with no modifications, and it works well. No complaints! The phosphor bit of the light switch doesn't really work, although maybe it's different if there's direct sunlight shining on it.

Pity the 3 tiny 'lights' are not lights at all, just dots, otherwise nice looking product and good value

The double light switch is a very well-made switch and very stylish. I got an electrician to fit it for me as, I could have probably worked it out but prefer to be safe than sorry.The dots on the switch do glow a little bit but they were not the main selling point for me so I am happy with the switch, how it feels and operates.Recommended.

Dry easy to fit as a replacement light switch, it took just a few minutes to complete the task. The switch works well with a firm, positive action, and especially easy to use with its large surface area.In appearance it is smart and neat, and goes especially well with its glass face matching the glass edging tiles where it is situated.

💡 The light switch is supplied in two parts; the light carcass containing the switch mechanism, and the facia or surround. You also get two screws to secure the switch into the pattress in the wall. The switch is designed for simple setups of 1-way single-pole, all the way up to 3-way switching, and you specify this when ordering. The plastic parts are all the same when supplied, but the number of switching components inside varies.💡 The light switch carcass is easy to fit, and the mounting holes are really rood and allow it to slide for exact positioning. Wiring was easy, as the switch I was replacing was single gang only, so had just two terminals. I fitted it within a shallow pattress, and this was just sufficient, once I sunk the pattress screws in a little deeper as this light switch took up the full depth. A slightly deeper cavity would have helped me, but the cable entry is at the top on my version and so does not contribute to the overall depth. For more complicated switching, cables can enter from the top and the bottom. The only thing I found with this is that the screws are too long for a shallow pattress, and I used the originals from the old switch plate that I was replacing. The instructions are readable, and you need to pay attention to electrical safety.💡 The surround is difficult to attach, and you need to get the switch into the correct orientation to allow it to seat home as there is a key tab, but it eventually snapped into place when I applied some force. Although the metal pattress box was earthed in my installation, the metal frame of this switch is painted, and I did wonder if it needed to be earthed too, as the paint provides an insulating layer and the securing screws may not make enough contact. Just a thought. Remember to remove the plastic film from the front of the glass surround.💡 The final result was a working switch that looks modern and attractive. In the end I had to leave a little gap top and bottom to be able to get the facia attached, so the switch is not as flush as it could be, and I don’t really know how I am going to get it off again if I ever need to. The large button will take some getting used to, but I quite like the glass finish, and it is easy to clean. I don’t know how effective the glowing dots are, as there is enough light to see by in the dark where this switch is positioned. Overall, I am happy with it and installation only took half an hour, including the struggle to seat the cover plate. ✔️

This looks great, and is nice and large so great to find and use when fumbling around in the dark.It's very simple to install, and fits easily into the smallest of backboxes.

Fácil instalación y queda bien .

Wie beschrieben und sieht top aus

attention, pas prévu pour les boites d'encastrements carrées, où bricolage en vue ;)

The overall product suits the look we wanted. The connections are easy enough however not in an ideal spot. They are on the top instead of behind in the back. This makes it particularly challenging if you have shorter connection wires. It would be better if it was clips instead of screws as well. Also the plate needs to go on exactly the way it comes out of the box or you can create bulges on the endges of the outside casing. In the end, looks good and the wiring is hidden, so I'm pleased.

Sehr Qualität. Akzeptabler Preis. Schnelle Lieferung. Einfach Montage