iBOSS PLA Plus (PLA+) 3D Printer Filament 1.75mm +/- 0.02mm,1kg Spool (2.2lbs) Toughness Enhanced 3D Printing Filament,1.75mm PLA Plus Filament,Fit Most 3D FDM Printer, Beige (Skin Tone)

I have used about 1/2 the spool. Over all I like this filament. It works well. I have yet to completely solve the stringing and blob problem. I am running at 200c, have done 5 temp towers, 5 retraction towers and all have stringing. They are very fine, silk like threads.When printing actual pieces and parts, the stringing is less but I get blobs formed while printing multiple pieces. The strength of the part is very high. I have printed the same piece in PLA and this PLA+ and this filament was a lot stronger.I am also not able to get the fine details in the print I get with PLA. I am learning a bit on each print. I may get there by the end of the spool. It does have issue with over hangs. Even a 25 degree over hang that prints perfect in PLA, this has a rough, uneven texture. You can see each layer of extrusion. I have to use supports where I did not need them with PLA.If I try to print thin external walls, they are warped and has low layer adhesion. I have tried with temps from 190c to 245c. They are either warped beyond use or layer adhesion is very low. I was hoping to use this filament in my printing of RC airplanes. It is looking like I can use it for certain thick, parts, like motor mounts, landing gear, wheel hubs, servo trays, internal pieces, but not for any of the thin, fine detail pieces.

Fits In AMS, no issues with it at all.

I love the color and works perfect!!!

I used this filament to print a kraken-like sculpture a student created. This 3D model used a ton of supports, and this filament did not like that at all. If something more simple were printed, it printed fine, and the color is beautiful. In our case though, once the print got to the top of the supports, it all turned to spaghetti on both a Bambu Labs X1 Carbon and a Creality K1C. I played with settings until I was blue, but nothing seemed to help. I changed filaments to a different brand of silk PLA, and the model finally printed. In short, I think this is good filament, just don't use it where supports are also needed.

Its adhesion is good makes good prints the color is great it doesnt break its PLA + and it hasnt tangled or jammed on the spool its wound very perfectly and the price is extreemly good i have gotten several of these filament and they have all been great ill get more im sure

The media could not be loaded. I’ve never been so frustrated with a pla. Maybe it was a bad batch, but even at the recommended 220’ (variations of 10’ tried as well) this product will not create a consistent, strong result. The lines in the roller are where the PLA didn’t adhere correctly. It is in different places in each print. Also caused nozzle to clog, which I’ve never had before. Switch with a different brand to see if there was a problem with the file and it printed great (so fault is not the file.) This was a great shade of green, just not reliable for a consistent print. First time using this brand and so I’m not sure if it’s a product issue or not.

Print quality is ok, stringier than my other PLA+ my only real complaint is the color is a lot lighter than the picture indicated. It's not as vibrant as the picture and is more of a muted easter yellow instead of the brighter more saturated color of the picture. Price was still good for what I got.

This pla seems to extrude in/within typical median parameters. I found no issues in my basic use of this item. I chose this particular item for the tone of color. Will purchase again.

Sin duda tiene mucha calidad, resiste y el color es grandioso.

Es un buen filamento por su calidad precio, requiere parámetros mayores para trabajo bien, mi configuración fue de 215 y 65 la cama, esto ayuda a tener mejores resultados, estoy satisfecho con el producto.

Excelente filamento, me encantó el color y la calidad, fue muy fácil calibrar mi ender 5 para imprimirlo sin que dejara rebabas o hilos.

Es muy difícil el manejo de este filamento, poca adherencia a la cama aun cuando subí temperaturas de 225 para la boquilla y 75 para la cama. En impresiones grandes se vuelve mucho más complicado su uso.

en general está bien pero cuidado con las impresiones largas porque tiende a tener problemas, probablemente por el mismo material, este material me recuerda más a la consistencia del silk para que se tenga en cuenta, además de que al finalizar una impresión parecía que había dejado residuos encima de la impresión, como un polvo de material