PEI Sheet for Bambu Lab X1/X1C/P2S/P1P/P1S/A1 Carbon Build Plate Heated Bed Spring Steel Flexible Platform 257.5x257.5 mm Double Side Textured Board for 3D Printer (Gold)

Editing my Review to 5 stars: My original review is below and was 3 stars due to having bed adhesion issues with this plate, especially compared to the stock textured PEI that comes with the printer. After some experimenting, and trying to do a first layer test with my printer, I ended up discovering that my printers bed was horrendously unlevel, the auto level was not adjusting like it should properly, and the printer was sent without bed spacers to aid in leveling. I had issues getting prints to stick with two different aftermarket plates (this one and a cryogrip) which is why I started looking at the printer itself. After fixing my issues, things are better, the plate would get about 4 stars because it still is not as adhesive as I would like but the extra star is for the seller. They reached out and have been great to work with and they are going above and beyond to make sure I am happy with my purchases. I'd say if you want to try this plate go for it, if you have any issues, the seller will take care of you. Original Review: Have only tried the holographic side so far but like another reviewer I am having bed adhesion issues with the Kobra S1 using PETG. I have found that it usually works OK after washing the plate, but if I don't wash it every print then the prints will fail their first layer. When it does work, the design is really cool, and it pops right off the plate with zero issues which is also nice, but having to restart a print 2-3 times to get it to stick on the first layer is frustrating.

These magnetic, spring steel plates from HzdaDeve are a perfect fit for the Anycubic Kobra 3 and the default magnetic properties keep them in place during long, high-speed print runs.. The level properly and print adhesion at normal PLA temperatures (55C in my case) and the resulting surface on the printed product is excellent. Both the prismatic and flat finished side are well defined with no issues on either side. If you're looking for a bargain plate with that little something extra, you can't go wrong with these plates.

I have tried several aftermarket build plates for my X1C and this one is the best. Even better than OEM Bambu. Slightly heavier than the OEM plate so it sticks to the magnets with more force. The pei coating is very uniform and nice. I've got about 100 prints on the plate and it has been flawless. Hard to believe it's so good for 25% the cost of the OEM plate. I bought four more.

Sticks better then original. So far no issues and adhesion is good

Awesome plate! Much easier to remove my prints. I recommend this product 👍👍

Worked really well at first and then started to lose adhesion without cleaning which I guess is common for build plates. Also the sticker print doesn’t stay on the 3d printed object as long as I would like. After a few finger prints it seems to fade away. Does fit the Elegoo Centauri Carbon really well. Another thing I notice with mine out the box was that one of the corners of the build plate had the plastic peeling up. Hasn’t made much of a difference when printing but it is a quality control thing that should be mentioned. I’m on the border of giving this 3.5 stars but I do like it for what it’s worth so I give it 4.

Right off the bat I'm impressed with the durability of the build plate. Amazon packaged it in a padded envelope instead of a rigid box, and the carrier sent it to the other side of the continent for a week in error. When it finally arrived there were visible dings, creases, and crumpled corners on the packaging. Expecting the worst, I was very pleasantly surprised to find that it was perfectly unscathed and uniformly flat. Despite Amazon and UPS doing it no favors. As for the functionality of the plate, everything is so far so good in my experience. Superficially the texture seems very similar to the Centauri Carbon's stock plate on Side "A", but under magnification you can see the PEI coating on the HzdaDeve plate is comparatively much thicker, and the texture is almost inverted. In the pictures I provided you can see the stock plate being mostly trenches, with occasional peaks. And the HzdaDeve plate is more like plateaus, with occasional holes. This makes stripping skin oils from the surface with isopropanol MUCH easier, and keeps adhesion between prints far more consistent. I can see this becoming my new "daily driver" plate, highly recommended.

My A1 print bed had seen better days and I wanted to save a little money and found this bed. The textured surface works perfectly and has great adhesion with PLA and PETG. Great build plate, especially for the cost

Awesome product would buy again

Fits perfect identical to factory plate just with cool