Thermal GrizzlyConductonaut - 5 Gram - Liquid Metal Compound Thermal Paste - For Maximum Thermal Conductivity while Overclocking CPU/GPU/PS4/PS5/Xbox

I bought a 5g tube of liquid metal so I can start delidding multiple CPUs as a hobby. I have never seen such massive improvements on temperatures until I have used this!Running an i7-4790k @ 1.3V was registering 81°C, whilst the same settings, although delidded, and with this applied, the temperatures dropped to 62°C! Stock temperatures have also dropped around 17°C!A more recent project, delidding an i3-8350k, showcased a drop of 13°C on stock clocks - there's quite a bit of difference as the i3's die is smaller than the Haswell Refresh i7s. If you are considering on delidding a processor, this is probably the best material you can get!Best results on processors with larger die area!

This stuff is the bolkocks like my temps droppes 20c using liquid metal and my cpu is a i7 8700k runing at 4.8ghz volts 1.36vStandard intel burn test the first 4 passes temps onky hit 49c max and at 1.325v i7 8700k on reached max temp of 44c using intel burn test so adjusting vokts up and down is a must and doom 2016 in temps 47c max at 4.8ghzVokts at 1.36v so awesome motherboard aorus gaming 7 z370 and belive me its good

this liquid metal it's very good, but please be carefull when you apply this thing, when i tried to get some liquid out it suddenly splashed a high amount, so i had to ''succ'' it back in, i also delided my cpu with this, it dropped almost 30*C, a good product overall.IMPORTANT: dont use with aluminium heat sinks/ coolers

the 8700k runs hot but after delidding with this stuff it has dropped to around 60c from 93cdid used it between the heatsink and the cpu just to make sure i had good thermal contact.basically if you want to drop your temps big time use this stuff.

You need to be really careful when applying this Do not apply too much pressure to the plunger and be very careful and mindful of using this around other components the slightest drop could connect with small traces on mainboard

The best stuff ever. BE CAREFUL when applying, use nail varnish on capacitors nearby if applying near to the circuits :D