VonHaus TV Wall Bracket for 32-75" Screens, TV Bracket with Spirit Level, Flat to Wall Mount with Tilt, 75kg Capacity, Max VESA: 600x400mm

This item is well made. It is better than anything that currys supply and half the price. I should know as worked in engineering. Packed well and delivered on time. Fitted perfectly

Excellent wall mount for my 55" TV. Easy to mark the fixing positions as the bracket was supplied with a small spirit level. Fitted to the wall in 20 minutes with 6 fixings (I bought Gripit Blue heavy duty fixings separately for a hollow plasterboard wall (these are brilliant and very strong). Screwed my TV to the vertical bars with the fittings provided. Easy to lift into place and tilt/tighten the two 'safety' screws underneath. Very happy and tilt 5 degree tilt down sufficient for my view position. 30mins in total job done and result looks professional.

I always read the 1 star reviews first on all Amazon purchased products - it helps me establish the level of consumer intelligence before deciding whether their is merit in the 1 star review. With this particular product, I have found it difficult to rate it other than "exceeded my expectations." The 1 stars seem to mostly involve missing parts or incorrect parts however this maybe due to the tv having a less than universal screwing thread / size in the back (usually samsung tvs) and hence the manufacturer finds it uneconomical to provide these fixtures... Delivery was good. I received an email from Amazon stating the product had been shipped less than 20 hours after ordering and it arrived within three days of this time, with no aesthetic damage to the packaging. The actual product box was of low quality and after opening it up the perception of low quality continued as the instruction manual was not particularly comprehensive - some diagrams of contents and further diagrams of where the contents should adjoin. This isn't a particular issue unless you are the type of person that requires full prose of instructions - those with good Lego skills should grasp the concept well. The bracket itself is light - I was dubious so decided to try and bend it with my bare hands. I'm not the strongest person in the world but gave it a good attack without observing any flex, bend or misshaping - my thoughts at this moment were, "its bloody strong." Six heavy duty bolts were provided to attach the bracket to the wall. There was not much guidance from the instructions in terms of which holes to put the bolts through so I assumed a nice symmetrical shape would maximise the strength. I know that i have a thin layer of plaster board which covers brick work behind. I used a rather large drill bit to drill the holes through the plaster and through the brick work. The provided wall plugs went in well and the bolts (with normal and 'spikey' washers) were tightened into place. I then attached the separate tv brackets (which in turn are hung on the wall bracket) without any issues. My tv is a LG 47 inch thin smart. The screws provided fitted the holes in the back really well. Once on, i hung the tv onto the wall bracket and tightened the screws underneath (so the tv cant slide from left to right). I found the angle knobs really easy to put together and they work rather well. All in all its a fantastic product at a great price. I personally can not see why I would want to spend five times as much money for a product that can do the exact same thing. PS, the built in spirit level is great - it is accurate as I checked with my own separate level. One thing i would add is that the product is not being sold by the long established (kind of :S) UK Habitat company that many British people know well. This is a separate UK Ltd company which sources a lot of products from China however they may well send the specs over to China for production. As the product is being sold in large volumes and thus at speed, there is always the likelihood that manufacturing defects could exist with a chance of missing parts which some reviewers have commented on. 4 stars.... 1 missing because of instructions, but I wouldn't let this stop you from purchasing. If you're no good at simple DIY, buy it and with the money you save, get a professional to fit :)

This product is easy to install and comes with all the necessary fittings, fixings, and a leveller to ensure the TV is correctly aligned. It is sturdy and of good quality.

Used to fit a 43" TV. Found very easy to install, held the angle I wanted and feels solid on the stud walls. I used my own anchors due to being mounted straight onto plasterboard. 2 slight criticisms, I had to use my own m6 screws as the provided ones were too long (could be the tv rather than the kit) and required a fairly long screw driver for the security screws that hold the TV to the wall mount.

Good item I would recommend to anyone

The tilt function on mine would not lock properly.Do not know if it was faulty or the tv weight 65” slim tv. i had already mounted the wall plate before realising. I just drilled 2 holes for bolts to lock it in place,other than that it is good quality for the price

This is an excellent wall bracket, inexpensive, easy to fit and works well, especially as the brackets in town ranged from £60 - £80, that is more than three times the cost of this one (I paid approx £20 including P&P).Initially I was hesitant about buying and fitting my own tilt bracket, thinking that it may be a job for a professional, however, this proved to be unfounded. The product arrived promptly and consisted of three main parts, a plate that fits on the wall and two brackets that hang on it. There were lots of screws and bolts included, but most of these were not required, they are there to cater for various typres of wall. Having measured up to descide where to put it and marked up with a pencil and fitted the plate to the dry lined wall with 12 screw fittings, I bought these and 12 washers from a local hardware store for £5. could have used the ones supplied but prefer to use the type I am familiar with. It was a stud wall and only two screws engaged with a solid timber stud although the final job seems solid and seems to take the weigh of a 42 inch heavy plasma without any problems. I kied the inclusion of a spirt level in the wall plate - very useful. This is my experience, do this at your own risk of course, I did go against some advice in the instruction sheet regarding how to fit it to a stud wall. The two brakets were screwed to the TV, these each had a tilt knob fitted, it hung on the plate easily, there were two screws to tighten to set it in place.I was quoted £60 locally to have this fitted but did it myself in less than an hour. There is the ability to move from side to side by sliding on the plate and also tilt. Its a well made tilt bracket, proved to be an excellent buy and has a good quality feel, buying and fitting this saved me over £100 in total. As written in the instruction sheet - I will 'enjoy the using'!

Diese Flachbildhalterung ist Preis/ Leistung Top aber mit Mängel Mängel: 1.für meinen Samsung 42" Fernseher waren keine passenden Schrauben dabei, soll heißen Gewindegröße war vorhanden nur die länge nicht , die beigefügten abstandhalter funktionierten bei mir nicht da diese zulang sind und ich nur ca. 2mm Gewinde für den Fernsehr hatte ,zuwenig, habe es mit größeren Muttern ausgebessert die mir als abstandhalter dienten. 2. Die Fernsehhalter passen nicht richtig zur Wandhalterung, das heißt man kann den Fernseher nur aufhängen die unteren Krallen fassen nicht in die Halterung. Positiver Effect: Fernseher lässt sich leicht an und abhängen. Positiv: reichlich Schrauben vorhanden, Wasserwaage an der Wandhalterung ist ziemlich genau, es ist reichlich Platz zwischen Wand und Fernseher für die Anschlüsse Für meinen Teil , die Mängel sind nicht gravierend lassen sich mit Kopfanstrengen beheben. Produkt ist trotzdem 5Sterne wert ,zumal der Preis dafür völlig i.O. ist!

COMPRE UNO Y ME GUSTO MUCHO, Y COMPRE OTRO, SE LE VE MUCHA CALIDAD. EL MATERIAL SE VE MUY ROBUSTO Y LLEVA TODO LO NECESARIO PARA EL MONTAJE COMPLETO

Produit solide, facile à monter (chevilles murale, vis, rondelles, et un jeu complet de vis coté téléviseur couvrant beaucoup de cas possibles - diamètre longueur...- sont fournis); malgré qu'il soit fabriqué en Chine. .J'ai placé un plasma 46 " (39kg) sans difficultés à ) part le poids du téléviseur lui-même qu'il faut bien accrocher au support à un moment.. Une deuxième personne pour sécuriser n'aurait pas été de trop mais je m'en suis sorti. Le système d'accrochage puis de verrouillage est bien pensé. Une grande marge de manœuvre pour la fixation du téléviseur: en largeur, c'est une glissière; en hauteur d'un coté des trous espacés régulièrement en de l'autre des trous oblongs: on peut ajuster au plus prêt selon l'écartement des fixations sur le téléviseur. Un niveau à bulle est inclus dans le support. Appréciable, la possibilité d'inclinaison vers le haut et vers le bas pour avoir accès aux branchements. Il est possible de verrouiller la télévision une fois inclinée, ce que je n'ai pas fait: je l'ai laissée verticale pour conserver la ventilation telle que penser par le constructeur (un plasma chauffe beaucoup; j'ai préféré privilégier sa durée de vie). Si vous cherchez un support qui vous fera gagner de la place (ma télé était sut pied auparavant) avec une bonne qualité et un prix tout doux, vous avez probablement trouvé.

Very pleased with this simple low-cost wall bracket; I have sheetrock walls on 2x4 studs, so I discarded the mounting hardware that came with it and got my stud-finder out and ran some long lag bolts; I could have used a large washer with my lag bolts, but I chose to drill my own holes in this mount, which was easy to do. I put in four bolts; and I plan on six bolts once I upgrade to 65" TV. I mounted a 55" SONY ... and it floats just about an inch and a half out from the wall .. so there is a 'floating' look to it .... which I like; this beats the heck out of all the difficulty of attempting a flush or near-flush mount; and it is a good compromise to mount a TV. What remains for my wife and I to do next is to hide the two wires to the TV ... using one of the many possibilities; Amazon offers a number of products for concealing the wires. I think it took my wife and I about 45 minutes to unpack and mount this wall-mount and put the TV up; that includes some drilling that I did by my own choice (not a requirement for mounting this mount to the wall). The wall-mount is "one piece" ... and made of hardened steel; it is powder-coated from what I can tell; There are two pieces that go on the TV, very easy to install - we used a drop of loctite on each bolt (overkill). There are two knobs that snug-up a bit and permit you to tilt the TV up or down. Great product.

I read the reviews on many of these on Amazon before buying. This one looked the best, so I went with it. There were several bad reviews on this one too...and I really do not understand why. I had my LED TV upstairs professionally installed a year ago and the used a mount that looks very much the same. I just installed my new Plasma in the basement gaming room and used this mount. It is ONE PIECE which is nice! Hole spacing...no problem, the are slotted and consistent. My walls are studded and boarded in that room so I used my stud finder and used the large self starter bolts to bold it to the studs. It comes with the kit to allow you to use the anchors to hook it to concrete or through drywall. I would never count on hooking it to just drywall...EVER! They tell you to use all 6 ankors...probably so if just going into drywall. But being one piece and over 16 inches long, I was able to use 4 bolts and hit studs on center. The mount is not going to fall down, I am sure of that! If anyone gives this a bad review saying it did not have the right parts or was hard to install or is too flimsy or whatever...they probably should not be trying to install something like this themselves...you first have to know which end of the screwdriver to use first. If not, call a professional to put this up for you.