BLACKHORSE-RACING 10" Universal Slim Fan Push Pull Electric Radiator 12V 80W High Performance Cooling Fan with Thermostat Wiring Switch Relay Mount Kit Black

I bought this fan early summer to put in my 79 MGB. Very easy to install and kept the engine cool while I was in heavy traffic. Before getting this fan my car would get to hot and start choking.

This is an excellent reversible 12V 10" radiator-type fan. I installed it in my greenhouse to help move air in from near the floor and out through the roof vent. It can cool the greenhouse from over 100 deg F down to 80 deg F in 20 minutes or less.

Here's what I did to add a cooling fan to the AC Condenser. 1987 Chevy Custom Deluxe. You do have to reverse the fan blades to blow and find the right wire to make it spin in the right direction. Remove grill and the fan shroud and top radiator supports in order to get access to the back of the condenser. Mount the fan. Wire the relay as pictured. I chose the evaporator sensor as power to the relay so the fan comes on with the AC. When the AC is not used the fan stays off. Adds 800 CFM to cool while driving slow. We'll see if it does anything in this Florida heat.

The only way to reverse the air flow from push to pull. You have to flip the fan blade around. Retorque nut to about 28 inch lbs. Switching current won't do it. For wiring first decide if you want to use the fuse link or circuit breaker, you can only use one. ( based on my knowledge and trial and error ) #30 goes to the positive at battery, etc. #87 to fan and other fan wire to the ground, #85 to ground, #86 to a switch or compressor wire for the clutch. This situation worked for me. Also if you want to contact the seller through Amazon allow at least 12 hr or more. They're overseas somewhere if you're in the united states. They got back to me even though I'm impatient and had moved on.

Great power and seems well made. Very easy to install. Is is about the same level of noise as other electric cooling fans.