Synsen5Pcs 360°Rotate Mount Cable Clothing Clip Organizer for Beats Earphone and Most Other Headphone - Clips onto Your Clothing to Keep Cord in Place (Black)

I have a pair of Jaybird Bluebuds X, which I would wear around my neck. I only wear it under the ear so I needed something to keep it in place so that whether I am using one ear or not using either, it stays attached. It works the way I wanted it to work, and the cord holds pretty much perfectly. Before I got these, my buds would fall the the floor from time to time if I don't adjust it on my neck often enough.[description of use with Jaybird Bluebuds X or any other bluetooth cord buds]A bit more into depth on how I use this product is that I attach the cord to the clip, then I clip it to my shirt collar on the back. When I use both ears, I wouldn't need it to be held down so I unclip it so that I can freely turn my head. Using only one ear, I place the clip closer to the ear so that I can turn my head without tugging on the cord. When I leave the buds hanging, I would have the clip closer to the ear that I generally use. The clip is loose enough for the cord to slide and adjust, but can still keep the cord in place.Would recommend.[Edit] Because I feel like my last review wasn't as clear as I had hoped for Jaybird Bluebuds X users, I have posted a photo for how I used this product. It is actually not how I explained previously (above). The photo should be self explanatory, but just to let you know if you do it the way shown in the photo, you only need to clip it to the center part of your shirt's collar, because the cable will not need to be readjusted as it is not loose for any falling-to-one-side problems. Hopefully that was clear enough. If you have any questions on my review, please comment!

I use these with around the back of the head type of earbuds and clip the cord to the back of the collar. Only problem I found is that the cable will slide through the clip and I have to keep pulling it back in place. A thicker headphone cord would not have this problem so I don't blame the clips for this.

The cable for my headphones was too thin to be held securely. That's a better problem to have than not being able to get the cable under the clip.When I first used the clip, the mass of the microphone/volume control block on my headphones pulled all the slack in the cable to one side. I solved this issue by tying a simple overhand knot in the cable across the top of the swivel clip. Now the mic/volume control stays where I can grab it, it doesn't swing around wildly, and the cable no longer pulls the earbuds out of my ears when I turn my head.The part that holds onto your clothing is very secure, and not so heavy or large to be an annoyance. I wish I had purchased this product before I lost my previous earbuds.

I bought these to replace the clip on my Bose SoundSport wireless headphones. I also have the regular SoundSports and these would work perfectly with them. For the wireless Bluetooth version, these clips won't easily fit. I broke one trying to fit the wire into it. I finally figured out the I had to physically bend part of the plastic back to get the thicker wire of the wireless SoundSport in. Otherwise it works as advertised and once I finally got the wire to fit, it feels like it definitely won't fall off.

These things are very cheap, but they can possibly get the job done. The problem for me is that the holes are too small for my headphone cord to fit through. So what I have to do to make it work is to pull back the opening part of the cord holder until it is wide enough for my cord to fit. The problem with doing this though is that eventually the cord holder part snaps off entirely, rendering the clip useless. You really will need all 5 if you have a normal sized headphone cord. I consider this a temporary solution until I can get some new headphones, and nothing more.

Good but not the greatest for clinging to all of your clothing. I use these for my headphone wire. Now and then, it would slip off of outer clothing. A great buy for those that live in warmer climates. If I did, I would have given them a 5.

Although these are made to hold microphone cords in place, I am using these as one would a lapel/tie microphone clip for a  YPA M1-C4T Lavalier Clip-on Microphone for a Audio-Technica MIC  (which is a replacement but very similar to original mic). It is a very light mic, so the clip just needs to grab and hold the cord and attach to clothing. They were cheap enough to try as a replacement.

Works extremely well. Does not come off. One problem was trying to connect to the wire. I had to pry the clip open to secure it to the wires. Another problem was the on several clips /mounts the clips broke off when I tried to connect the wire

Lo compré para reemplazar el que se rompió (ya llevo 3 distintos) para mis audífonos bluetooth Jaybird X3, y el problema es que se desplaza el cable conforme voy trotando, obligando a jalar el cable de regreso a su posición original. Si tienen audífonos bluetooth unidos por un cable entre sí saben a lo que me refiero, por lo general estos audífonos tienen un panel de control de botones que cuelga de alguno de los lados, haciendo más pesado un lado que otro. Conforme trotas, el sujetador "debería" mantener en su lugar el cable fijado en la parte trasera del cuello de la playera, sin embargo el cable se va desplazando o cayendo hacia el hombro del lado que cuelga el panel de control de botones.En resumen diría que busquen otra opción, ya que a lo mucho cumplen al 50% su función principal.

Es lo que se ve en la foto, la descripción tal cual y quedó muy bien el clip en mis audífonos Bosé que ya se me había roto el original. Lo puse sin problema, si hay que hacerle un poco de presión al cable para que entre pero me genera mucha más tranquilidad ya que se no se va salir de allí, ademas, gira! Me quedan 4 mas de repuesto, pero espero salgan de muy buena calidad y duren mucho, sobre todo el que recién puse. Los súper recomiendo si es para el mismo propósito, son pequeños pero apenas para sujetar en la ropa y que no estorbe y se vea bien. Llevo 1 ydía, así que su resistencia no la se aun.

Estan pequeños, los ese para mis audifonos, me hubiera gustado aun un poco mas pequeños, pero si lo recomiendo

El gancho para el cable es un poco pequeño, lo tuve que abrir con una pinza. Fuera de eso, buen material, precio y sobre todo que ahora tengo repuestos en caso de que falle el nuevo

Son útiles, cumplen su función aunque el precio se me hizo alto para lo que es