ECHOGEAR MaxMotion TV Wall Mount for Large TVs 42" to 90" - Full Motion Has Smooth Swivel, Tilt, & Extension - Universal Design Works with Samsung, Vizio & More - Includes Hardware & Drill Template

This is my second purchase of the ECHOGEAR MaxMotion TV Wall Mount, and I came back to it because my first one has been working perfectly since 2016. It has never sagged, slipped, or caused any problems at all, so I knew I could trust it again for my new setup. I installed this new mount for my 77 inch LG B5 television, and it performs just as well as my original one. The build quality feels very strong, and the full motion movement is smooth, steady, and easy to adjust. It pulls out, swivels, and tilts with no effort, and it stays exactly where I place it. The installation process was simple and very clear. The instructions made sense, the hardware felt solid, and everything lined up well with the studs. Once the television was on the mount, it sat level and extremely secure. I am very impressed with how reliable this product has been for almost a decade, and I am just as impressed with the new one. I highly recommend the ECHOGEAR MaxMotion mount to anyone who wants strength, smooth movement, and long term dependability.

When we first purchased our 65" Samsung TV, we had quite a bit of trouble finding a wall mount that would work, given the wall setup where we needed to mount it. The area borders on a pocket door, and so the stud centering is about 21" on center. Not all TV mounts can accommodate that kind of span. So, although we found some full-motion mounts that would work, they were absolutely cost-prohibitive ($350+). We instead opted for a cheaper mount that only allowed for tilt adjustment. This mount worked fine, but it didn't exactly hug the wall and the movement was extremely limited. In more recent years, we've noticed that when looking at the TV from an extreme angle, the picture is a bit washed out, so I renewed my search for a better mount, when I happened upon this one. Seeing as how it is well-priced (relative to the others I've had looked at), I wasn't expecting much - especially since some of the reviewers indicated dissatisfaction with some of the features. I'm glad I didn't let the naysayers dissuade me. First off, this mount is very easy to install. They include detailed instructions, all the hardware you'd need, and a template to make sure that you're dead-on with your lag bolts. You will of course need a stud sensor, and it's going to be critically important that you hit dead-center on the stud, so a little care and attention to detail is warranted. But once the brackets are properly mounted (both to the TV and the wall), the rest is a cake walk. Every imaginable adjustment is available, so you do need to take your time and lock in those adjustments you won't frequently use. For me that is the tilt and level adjustment. Once you've got it setup, the motiom is smooth and fluid. When I'm sitting in my recliner, which is almost at a 90 degree angle from the TV, I can pull the TV away from the wall and position it exactly as I like. This is particularly great for video games. The mount itself is a little on the heavy side, but is quality-made. All the motions are smooth and well-weighted. If you just want it flat against the wall, the space it consumes is shockingly narrow. Even with the entire screen having a bit of a tilt (to prevent glare), it still has less of a gap to the wall than the previous mount that had very little adjustment at all. In summary, I couldn't be more satisfied with my purchase. It's not cheap, but relative to the other mounts on the market, it's very well-priced and well-made

The first time I bought this mount was 5+ years ago. It has traveled from home to home and even made it across multiple states. This mount is heavy-duty, well made, and thoughtfully designed. Heavy gauge steel, smooth and strong arms, full motion without resistance, etc. are great. At this time, I have three of these mounts. The most recent one I bought a couple weeks ago, and the quality is just as good as it was from the original one I bought. I've used this mount on an 85" TV and two 65" TVs, it does not droop or ever feel like it can't handle the weight, even when you pull the mount out to work on stuff behind it. Installation is a breeze, especially if you're handy, the only gripe I could see is simply the weight of the mount, but you need that kind of weight to handle such heavy TVs that are full motion and can pull away from the wall such a large distance. If you're looking for a full motion mount that will last a lifetime, you can't find a better product. Great product, great build quality, great everything.

High quality throughout. The instructions are excellent, probably the best I've ever seen for a product of this class. The design of the product, its fit and finish as well as it's packaging are a marvel of engineering. I'm a critical guy and I was unable to find fault with anything. It's rare to see such a difficult job done so well. I'm very impressed. I don't hang TVs often so I've got to remember the name ECHOGEAR for next time. Further Details: The hardest part is finding the studs, once you do that you are home free. The light cardstock template makes the rest easy. It's best to have a helper because the unit is sturdy and by that mean heavy. You could do it as a single person job by putting in small head screws at the top so as to hang it like a picture while you install the lower lag bolts, and after tightening the lower lags, swap out the top skinny screws for the upper lag bolts. It comes with all the hardware. The topmost holes of the two back of TV brackets are roughly 4" above the upper row of wall mounting lag screws. Your TV manual should show you were the VESA mount is positioned with respect to the TV extent, so you can use this four inches to figure to determine how high to mount this on the wall. You will need some of your own tools. I used my own (measuring tape, masking tape, pencil, level, drill with 7/32" bit, and a 1/2 socket wrench, I also used post-its to mark out the 4 corners of where I expected the TV to land as well as to mark expected heights.)

Great product fast shipping thank you

We bought this to hang our 55" TV. We chose this model to fit the bolt pattern on our TV and after finishing the install, we are confident this is a good product. This appears to be well made and good quality. The mount is packaged very well, we had no concerns anything inside was damaged, and there is a great selection of screws and spacers. The lag bolts were good quality. The instructions are the best : clear, well written, good pictures, and they have some fun too. As the product claims, this is very easy to install. The template is accurate and makes this a quick job (once you find the centre of your studs). If you are unsure at all, watch the installation video - it's only a few minutes long and is a reliable demonstration of all the steps. The mount moves smoothly when pulled away from the wall and pushed back in. Great options for extending out from the wall, tilting down, changing viewing angle - all the product descriptions for range of motion are accurate and easy to adjust.

Muy estable solo hay q comprar los tornillos para concreto por separado

I poured over many reviews and Q and A's for all kinds of different TV mounts on Amazon, google searching "Best Of" and review sites, checking out many big-box stores, etc etc. and finally decided on ECHOGEAR. I'm glad I did. The price was right, the mount is super sturdy, and the instructions are crystal clear. The company also has a great sense of humour. All big wins! Installation was pretty easy and straightforward. The instructions are excellent. This mount is sturdy! I love the fact that it extends out 22" - just what I was looking for - a good solid mount that retracts very close to the wall, yet extracts way out so I can turn my TV to see it from the other room (while making supper or eating at the table). I've included photos with my new 55" Samsung TV on it. We'll be looking for a nice table to go underneath the TV now and repurpose the old stand. A nice cable cover for the wall and things will look even better. I purchased this so I have the option of putting a much larger (and heavier) TV on it in the future. My TV is in very safe hands - this thing ain't going nowhere!

Excelente soporte, en realidad la marca se ve que tiene buenos estándares de calidad, la calidad del acero es muy resistente, necesitas buena herramienta para instalarlos, como llave de dados de 10mm, un buen rotomartillo para hacer las perforaciones, ya puesto el soporte se siente muy resistente, yo me recargaba completamente sobre el y peso 72 KG, sin moverse ni rechinar. vale la pena la espera que sea importado de USA.