B7000 Glue Clear Adhesive, Jewelry Bead B-7000 Glue Semi Fluid Adhesive Glue High Viscosity with Precise Tips for Rhinestones Fabric, Glass, Jewelry Making, DIY Art Crafts, Leather, Toys (2x25ML)

The B-7000 works great. I used it to glue rhinestones back onto a purse since I was going to a wedding. The only thing I didn't like was the odor. That is typical of this type of glue so use in a well ventilated area.

It's clear, it works fast, it is super strong, and I wished I had glued my old doll's head together using this stuff. It dries clear, it's doesn't smell too much, and, I love it!

Works well for my robotics needs.

Used these to repair shoes because the sole was coming apart from the shoe. Worked great but definitely needed ventilation. My bathroom fan wasn’t enough.

This is what that back says:Product descriptionThis glue is a one-component all-purpose adhesive, curing at room temperature, table dry speed, irritating odor and smell. Mainly for diamond jewelry, window grilles, mobile phones, toys, handicrafts and other industries bonding special environmental adhesives;Easy to operate, do not need to re-packaging, open the lid can be used.Has a high flexibility, soft film, anti-vibration and waterproof and does not hurt the material;Adhesive can paste more materials, it is metal, glass, ceramics, mobile phone repair, stone, bamboo, cloth, leather, PE, ABS, nylon, sponge, film, fabric, electronic components,plastic, rubber, Fiber, paper, and other materials have a good paste performance;Tochnical dataAppearance: transparent semi-fluidOdor: AromaticSolid content: 28% -35%Hardness after curing: 70-85ASurface dry time: 5 minutesFull cure time: 24-48 hoursSave: Save at 10 to 28 degreesMethod of use1, Please read carefully before using the product description2, in a large area before use, please do a small area of experiment3, make sure the sticky surface clean and dry4, the best use of temperature should be between 18-32 degrees5, the product can be opened directly on-demand evenly coated on the sticky surface6, wait for 3-6 minutes, the two sticky objects aligned bonding pressure7, put a few hours can be, 48 hours to achieve the best adhesive strength8, when the product is not good to avoid glue on the bottle after contact with air curingMattors needing atention1, may be irritating to skin and eyes 2, in a well-ventilated environment3, if inadvertently contact with the eye please rinse with plenty of water4, please keep away from children storage, production operation, please stay away from fire 5, the shelf life of one year, safe use of the product see the end of the tube 8, when the product is not good to avoid glue on the bottle after contact with air curing

This product is amazing !!! The best attribute along with the hold if the fine tip and internal plug so to speak. It was very controllable as to where you were gluing. No mess at all. It does have a strong smell but if you read the directions it says to use in well ventilated area. Excellent. I’d prefer this product over E6000

I love the precision applicator! It makes it so easy to use. It holds well, even on difficult things to glue. I use it on everything-including remounting cabochon gems that come loose.

I was hoping this would be an improvement on E-6000 but it isn’t. It’s an ok glue. Dries clear, just didn’t have the strength I was looking for.

This glue is so easy to use on small objects because of the tiny applicator, what a relief! The glue is strong, attaches metal to glass, glass to glass, etc, great for crafting. It also seals well after use so I don't expect it to dry out any time soon.

It's glue. Works well, wear your gloves tho

Excellent glue. I love the small tube with small tips.

Glued a logo patch on a baseball cap that was falling off and a laptop screen that was separating. I was skeptical at first but so far it has held together. The very fine nozzle makes it easy to direct the glue where you want it with no mess. Better than the well known "Crazy G*" junk that has never worked for me. Just make sure you put pressure on the glued area for the appropriate time and let it cure according to instructions. It has more than paid for itself. Now I have to wait and see how long it holds together.

I use this in Jewellry making and adding rhinestone or Swarovski crystals to anything. There is a super fine metal tip to dispense the smallest amount and get it precisely where you want it. The lid had a pin metal pin that goes back into the top and then screws on so that the nozzle never clogs.Great adhesion also. Highly recommend for any creative people or for repairs of any Jewellry as well.