BTF-LIGHTING FCOB COB LED Strip Flexible High Density Uniform Light 8W/m 16.4FT DC12V Warm White 3000K CRI 90+ 8mm Width Dimmable LED Ribbon for Home Indoor Decor(No Adapter or Controller)

These were perfect for what I was needing. I’ve used these in multiple areas. Originally I got them for my safe, but when I had some extra I’ve used segments all over the place. I even put a 2’ section of them in my sandblaster with 0 protection and have had no problems whatsoever.I bought these since they look solid and I was concerned about the lights looking “scattered” instead of uniformed. These far surpassed my needs, are extremely bright, extremely white, and extremely uniformed. I will be using these for all of my led projects. Bang for the buck is 100%

Incredibly bright LED strip and the color seems almost identical to my other 4000k lights. Adhesive is very strong as long as the surface is cleaned and prepped. Had no dead spots or faulty spots in the entire strip that I saw, so good quality control compared to some I've seen

Time will tell how good these LEDs are, but so so far so good. They get bright, and i like how even and clean the lighting is. Just make sure you have the right AC adapter for them.Straightforward to use, and good value for my needs. Adhesive seems to be good, and you can cut the leds to whatever size you need. i'm happy with them.

The amount of light these strips put out is great and consistent. I’m using a white diffuser on my LED channels. 3K puts out a nice warm tone but makes my diffuser look dirty white. 4K puts out a modern pure white color but the tone feels a little cold. I kinda wish I could put both strips together.

We used these in our Skoolie conversion the adhesive On the back is OK but once the inside of our bus gets hot or cold, it does not want to stick anymore. They are pretty bright and they look good. We just added more adhesive to the back.

I love these lights, the color is true, the lights are bright. The adhesive backing works well on most surfaces. I've used these a number of times with no issues. A great product for the price.

Amazing. Very bright and the high CRI rating produces a very rich accentuation of surrounding materials. The adhesive is a high grade semi-removable media and should work well with most smooth clean surfaces. I didn't have a problem with it putting into aluminum channels. Adhere by putting pressure on the rubber diffuser first (yellow part) then use a flathead screwdriver or any other flat object to adhere the sides of the strip for the best results. The one nitpick I had with this strip is that when you cut it at the designated lines, the amount of copper left on each side to solder to is really small and didn't want to take my flux or solder very well. I used a razor blade to shave off more of the protective coating near the copper to expose more of the raw copper underneath for a larger surface area and better bond to my wiring. Worth the extra work for this stunning quality light

Right out of the box, these are very good (and bright) strips with the silicone diffuser built in. They produce a very nice crisp shadowless light. Unfortunately they do not last as advertised. I mounted them and used them for a storefront window lighting. They run from sunset to sunrise each night. I purchased them over 2 years ago and a few months back I noticed burned out LEDS in several places. One strip has comepletely died. So 5 starts for color and brightness. 1 star for value and longevity. Pay a little more and get a higher quality strip. Won't be buying these again.