Black LED Protector Headlight Fit for Harley Davidson VRod V-Rod VRSCA VRSCF

This is the perfect fit, easy to mount, good quality, BRIGHT LED that I was looking for. Literally lights up the road edge to edge, without people flashing me for hurting their eyes. Such a huge difference from my stock 2005 headlight it isn't worth comparing, honestly. Put several hundred miles on since install and so far, so good!

Installed on a 2004 VRSCB. Works great. I will note you need to remove the Chrome "eyebrow" off the top of the stock headlight. This leaves a pretty open gap between the headlight and the factory headlight cowl. I will say this is a much safer feeling experience riding at night now. I would estimate the low beam adds 60 degrees of horizontal vision and about 20 horizontal. The high beam is where this thing shines, pun intended. It basically saturates about 160 degrees horizontal and 80 degrees vertical with perfect white light. I feel much safer at night with this light. I will also not that when you do your alignment you should use 2 people.One to stand in front of the bike about 20 ft away and one to adjust. There is an angle which the headlight is too high and is absolutely blinding for other cars. Some think having a light as bright as it gets is safer, but oncoming traffic not being able to see is asking for a disaster. Best money I have spent on a bike upgrade, safety, awesome looks, and gets people asking what exactly is going on with my headlight. And no more bulb changes!

Works very well , fit nicely , looks great , very impressed thus far . If it last long , and provides the same amount of light throughout its life expectancy , I will be very happy . Installed in a 2005 Screaming Eagle V-Rod . I am a very picky person , so for me to rate this so well is rare . I would highly recommend this for any one who rides a motorcycle , and wants to see where there going . Ride safe , you can see my bike on YouTube .

I have a 2017 Harley V Rod Night Rod Special. This worked rather well to replace the stock headlight, but not straight out of the box. Getting it to fit properly was a pain. For those of you looking to purchase this, understand you will likely have to buy a washer or two to make the fit between the headlight and the factory mount snug so that the light doesn't tilt freely. Once all of this was completed however I will say the low beam profile is very crisp, however the high beam could be better. Overall it is a massive improvement to the stock headlight.

Easy installation. Plug and Play. No directions included, but if you connect it incorrectly the first time....you will notice your fuse has blown. Easy fix if you made this mistake. The light is bright and has a great field of view. I'm 1000% happier with this light over the stock light. Shouldn't take you more than 10 minutes to install.

I ordered this, and no matter what I did, the low beam would not work. The instructions were very poor. I noted that it didn't work and returned it, asking for a replacement unit. The replacement came, and it looked much better (washers taped inside the box, protective film on the lens, etc). I was surprised to see much better instructions, which clear diagrams and step by step all laid out. I followed the instructions and it worked great. No problems. Still need to see how it holds up, but the main hit on rating is due to product inconsistency.

I bought this LED headlight to replace the stock headlight on my 2004 Vrod "B" model due to the low beam reflector inside the light breaking off and no way to replace it. After removing the stock headlight, installation of the LED light took about 20 minutes. The installation instructions are pretty sparse but are all you need. My installation required the use of the included adapters. I did blow a fuse when switching from low to high beam. Please make sure you have a few extra 15 amp "mini" fuses on hand incase you blow a fuse. I was concerned the light has a black backing and would look out of place on my bike as the stock light had a grey/silver backing. The black actually looks really good on my bike with a black frame. The light is noticeably brighter than stock. I personally don't care for the look of the LED when the bike is turned off but love the amount of light produced when turned on.

Great light, plug and play, does not use stock headlight bucket. Unbolt your stock headlight bucket and disconnect bulbs from connector, bolt up new headlight to headlight bracket and plug in connectors. looking at the headlight from the front, the low beam wires are on the right side and the high beam is on the left side, make sure you connect to the proper plug or the fuse will pop.

Excellent! Nice!