Illuminate Your Ride! 🚗✨
The iJDMTOY 21W High Power Amber LED Bulbs are designed for front or rear turn signal lights, offering a plug-and-play installation without the need for load resistors. With 35 SAMSUNG 3030 SMD chips, these bulbs deliver a stunning 1000 lumens of brightness, making them three times brighter than standard incandescent bulbs. Ideal for enhancing your vehicle's visibility while ensuring a sleek, modern look.
N**R
Poor customer service from iJDMTOY
What I liked the most is how bright these bulbs are. I tested them in the rear lights of a 2014 Q50. What I disliked the most is that one of the bulbs was dead on arrival. Upon contacting the manufacturer, I was told that I must deal directly with amazon, even though I was outside of the 30 day return window. If both bulbs had worked, I would probably have given 5 stars. However, a company that stands by its products is a factor I consider to be quite important when I make a purchase.
A**L
they have hyper flashing as of now so I remove them and put back the stock turn signal and it works fine but really just over a month of the leds ...
Hey guys.. I brought these led turn signal for the rears ONLY (2016 honda accord) I must say there really bright and functional but now the punch line... they have hyper flashing as of now so I remove them and put back the stock turn signal and it works fine but really just over a month of the leds and they go bad WTH? And to top it off I can't return them ..expired. I'm a unsatisfied customer ..boy image X amount of each one sold that are bad..thats a lot of money
S**N
Wonderfully Bright and No Hyper Flash
The media could not be loaded. I received these (7440 Amber) LED bulbs for the front turn signals in my 2009 Infiniti G37 Convertible. The difference between the stock Halogen turn signals and these LED bulbs is staggering. It really is SO much brighter, on top of that there was no need to install resistors which made it SO much easier to install compared to previous bulbs I have used on previous vehicles.I have included a video of the Stock Bulb (Right Passenger side) compared to the new LED Bulb (Left Driver Side). The video doesn't show how much farther outward the new LED projects compared to stock. This was also shot in a very bright garage.
M**S
Very bright, no resistors needed, works well for my car
Been installed for a month or two now. They seem to being doing very well as rear turn signals. I had earlier changed the front turn signals to LED's with resistors installed. But the rear turn signals were more challenging since I couldn't find a suitable place to put the resistors. Then i found these no-resistor LED's. Now i have LED front (with resistors) turn signals and rear LED (these, no-resistors) so all corners can flash brightly and directly. Hyper flash is non-existent and correctly flash at proper speeds.Note that these are VERY bright. My car flashes the blinkers when locking/unlocking, and is blindingly bright at night when these flash in your face.These were used to install in rear turn signal location for a Lexus LS 430. Note that the bulb is slightly too long and will not go in all the way. I currently have to use a bit of electrical tape to keep it from wiggling out of the hole. Otherwise these have fit fine and work very well for its application.I will be sure to update this review if they fail at some point.UPDATE (July 2019)These have been installed in my LS 430 for over a year as of this update. They have been working perfectly as the day i installed them. HOWEVER i did re-encounter the issue of the fitment. As i mentioned, I need to place adhesive tape against the plug to keep it in place. However even after doing this and going on a 12 hour road trip, at some point the plug and bulb itself separated so i only had front turn signals but no rear. It might be something you have to live with, but if that prospect worries you i would advise against buying these. OTHERWISE these continue to be functioning, even after re-inserting into the housing/plug.
T**7
No hyperflash very bright
Installed on 2015 q50. No hyper flash, brighter than the originals! Light output is red. UPDATE.... Right side went out. Reinstalled regular bulb did not work.... Had to disc battery for the right side to work again. Reinstalled the LED bulb still did not work.. reinstalled regular bulb not working either redid battery disconnect and connected again and system started working again with the regular bulb.oviously the LED is Defective and its doing something to the computer that does not make any of the turn signals on the right side work. Not worth the hassle of replacing it and disconnecting and connecting the battery a 5 minute job turns into a 30 minute one. based on this issue i removed the other LED and replaced with the standard one. Id stick with my regular turn signal bulbs for now.
D**A
Poor quality control, ATROCIOUS customer service.
Update 3: TERRIBLE quality control. 2/3 bulbs I've had have defective cheap soldering. DO NOT buy from this seller. Extremely overpriced, dirt cheap materials and quality. Seller is only in it to make money. Offers no return shipping and super short warranty.Update 2:They want me to pay for item shipping & won't send replacement until they receive defective bulb. Cheap quality. They do not stand behind their products. I will not wait 2 weeks because they have lousy quality control.Update:I looked at the metal contact points that go in the socket, and 1 came loose. Poor soldering done when assembled in China most likely.1 bulb not working after 3 weeks. I hardly drove my car due to the pandemic. Had hazards on for 2 minutes and I noticed I'd get a fast flash from my turn signal. Bulb doesn't work.2013 Honda Accord. Rear turn signals only
A**E
Not for 2018 Subaru Outback
My goal was to try and find a LED bulb solution that didn't involve tapping into the factory harness with load resistors. These started hyper-flashing in my 2018 Subaru Outback after about 30 seconds. However the color accurately represents DOT amber and they are bright without being too obnoxious. The bulbs are significantly larger/longer than the stock bulbs, which didn't work well with the reflector housings in my front signals but worked fine in the rear. I also got two different models, the first set matched the pictures here with the white base and exposed LEDs, the second set had a yellow base and fewer LEDs on a printed IC board.
B**T
LIGHT UP THE NIGHT
Being the owner of 2 cars, I just received my second set of these led lights .............Super bright amber light with quick on/off flash .........Being in the auto industry as a choice of my career ,and dealing with brand new high end European luxury cars and SUV'S for todays market, I can honestly tell you that these JDMTOY led bulbs are much brighter than what most manufactures are offering in there cars , what you see in the advertisement [ photos/ video] is what you will get..........You won't be disappointed ....Trust me.
L**1
Great LED Orange Signal lights.
Very bright!! and no computer flashing issues. Love them!Not sure how long they will last but I'm hoping for the best.
A**D
Confusión de pedido
Hola... compre 2 veces este artículo y el primero me funcióno bastante bien!!!Sólo que el segundo pensé que había seleccionado el foco que tiene 2 funciones, cuartos en blanco y direccionales en ambas...Me podrán ayudar a cambiarlos?
H**K
but they look great and are nice and bright
I'm only giving a four because they still hyper flash , but they look great and are nice and bright .
A**R
One Star
Doesn't fit 2000 ford mustang gt
Trustpilot
1 week ago
4 days ago